On Fri, Jan 27, 2006 at 07:07:34AM +0100, Knut Petersen wrote:
>
> Well, there are no problems if SuSEfirewall2 is disabled. But have a look
> at the loaded modules:
>
> ipt_MASQUERADE 3968 1
> pppoe 15360 2
> pppox 4616 1 pppoe
OK, although we can't rule out sky2/netfilter from the enquiry, I've
identified two bugs in ppp/pppoe that may be responsible for what you
are seeing. So please try the following patch and let us know if the
problem still exists (or deteriorates/improves).
[PPP]: Fixed hardware RX checksum handling
When we pull the PPP protocol off the skb, we forgot to update the
hardware RX checksum. This may lead to messages such as
dsl0: hw csum failure.
Similarly, we need to clear the hardware checksum flag when we use
the existing packet to store the decompressed result.
Signed-off-by: Herbert Xu <[EMAIL PROTECTED]>
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <[EMAIL PROTECTED]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1610,6 +1610,8 @@ ppp_receive_nonmp_frame(struct ppp *ppp,
}
else if (!pskb_may_pull(skb, skb->len))
goto err;
+ else
+ skb->ip_summed = CHECKSUM_NONE;
len = slhc_uncompress(ppp->vj, skb->data + 2, skb->len - 2);
if (len <= 0) {
@@ -1690,6 +1692,7 @@ ppp_receive_nonmp_frame(struct ppp *ppp,
kfree_skb(skb);
} else {
skb_pull(skb, 2); /* chop off protocol */
+ skb_postpull_rcsum(skb, skb->data - 2, 2);
skb->dev = ppp->dev;
skb->protocol = htons(npindex_to_ethertype[npi]);
skb->mac.raw = skb->data;
