Get rid of sparse warnings in sky2 driver because of mixed enum
usage.
Signed-off-by: Stephen Hemminger <[EMAIL PROTECTED]>
---
drivers/net/sky2.c | 18 ++++--------------
drivers/net/sky2.h | 53 +++++++++++++++++++++++++---------------------------
2 files changed, 29 insertions(+), 42 deletions(-)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 842abd9..ae91571 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -522,7 +522,7 @@ static void sky2_phy_init(struct sky2_hw
/* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */
ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL;
/* turn off the Rx LED (LED_RX) */
- ledover |= PHY_M_LED_MO_RX(MO_LED_OFF);
+ ledover &= ~PHY_M_LED_MO_RX;
}
if (hw->chip_id == CHIP_ID_YUKON_EC_U && hw->chip_rev ==
CHIP_REV_YU_EC_A1) {
@@ -545,7 +545,7 @@ static void sky2_phy_init(struct sky2_hw
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed ==
SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
- ledover |= PHY_M_LED_MO_100(MO_LED_ON);
+ ledover |= PHY_M_LED_MO_100;
}
if (ledover)
@@ -2917,18 +2917,8 @@ static void sky2_led(struct sky2_hw *hw,
default:
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0);
- gm_phy_write(hw, port, PHY_MARV_LED_OVER,
- on ? PHY_M_LED_MO_DUP(MO_LED_ON) |
- PHY_M_LED_MO_10(MO_LED_ON) |
- PHY_M_LED_MO_100(MO_LED_ON) |
- PHY_M_LED_MO_1000(MO_LED_ON) |
- PHY_M_LED_MO_RX(MO_LED_ON)
- : PHY_M_LED_MO_DUP(MO_LED_OFF) |
- PHY_M_LED_MO_10(MO_LED_OFF) |
- PHY_M_LED_MO_100(MO_LED_OFF) |
- PHY_M_LED_MO_1000(MO_LED_OFF) |
- PHY_M_LED_MO_RX(MO_LED_OFF));
-
+ gm_phy_write(hw, port, PHY_MARV_LED_OVER,
+ on ? PHY_M_LED_ALL : 0);
}
}
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 7760545..713d2c5 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -608,7 +608,7 @@ enum {
PHY_ADDR_MARV = 0,
};
-#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs))
+#define RB_ADDR(offs, queue) ((u16) B16_RAM_REGS + (queue) + (offs))
enum {
@@ -1060,7 +1060,7 @@ enum {
PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */
};
-#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK)
+#define PHY_M_PC_MDI_XMODE(x) (((u16)(x)<<5) & PHY_M_PC_MDIX_MSK)
enum {
PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */
@@ -1156,13 +1156,13 @@ enum {
PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */
PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */};
-#define PHY_M_EC_M_DSC(x) ((x)<<10 & PHY_M_EC_M_DSC_MSK)
+#define PHY_M_EC_M_DSC(x) ((u16)(x)<<10 & PHY_M_EC_M_DSC_MSK)
/* 00=1x; 01=2x; 10=3x; 11=4x */
-#define PHY_M_EC_S_DSC(x) ((x)<<8 & PHY_M_EC_S_DSC_MSK)
+#define PHY_M_EC_S_DSC(x) ((u16)(x)<<8 & PHY_M_EC_S_DSC_MSK)
/* 00=dis; 01=1x; 10=2x; 11=3x */
-#define PHY_M_EC_DSC_2(x) ((x)<<9 & PHY_M_EC_M_DSC_MSK2)
+#define PHY_M_EC_DSC_2(x) ((u16)(x)<<9 & PHY_M_EC_M_DSC_MSK2)
/* 000=1x; 001=2x; 010=3x; 011=4x */
-#define PHY_M_EC_MAC_S(x) ((x)<<4 & PHY_M_EC_MAC_S_MSK)
+#define PHY_M_EC_MAC_S(x) ((u16)(x)<<4 & PHY_M_EC_MAC_S_MSK)
/* 01X=0; 110=2.5; 111=25 (MHz) */
/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */
@@ -1173,7 +1173,7 @@ enum {
};
/* !!! Errata in spec. (1 = disable) */
-#define PHY_M_PC_DSC(x) (((x)<<12) & PHY_M_PC_DSC_MSK)
+#define PHY_M_PC_DSC(x) (((u16)(x)<<12) &
PHY_M_PC_DSC_MSK)
/* 100=5x; 101=6x; 110=7x; 111=8x */
enum {
MAC_TX_CLK_0_MHZ = 2,
@@ -1203,7 +1203,7 @@ enum {
PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */
};
-#define PHY_M_LED_PULS_DUR(x) (((x)<<12) & PHY_M_LEDC_PULS_MSK)
+#define PHY_M_LED_PULS_DUR(x) (((u16)(x)<<12) & PHY_M_LEDC_PULS_MSK)
/***** PHY_MARV_PHY_STAT (page 3)16 bit r/w Polarity Control Reg. *****/
enum {
@@ -1233,7 +1233,7 @@ enum {
PULS_1300MS = 7,/* 1.3 s to 2.7 s */
};
-#define PHY_M_LED_BLINK_RT(x) (((x)<<8) & PHY_M_LEDC_BL_R_MSK)
+#define PHY_M_LED_BLINK_RT(x) (((u16)(x)<<8) & PHY_M_LEDC_BL_R_MSK)
enum {
BLINK_42MS = 0,/* 42 ms */
@@ -1243,21 +1243,18 @@ enum {
BLINK_670MS = 4,/* 670 ms */
};
-/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/
-#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */
-
/* Bit 13..12: reserved */
-#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */
-#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */
-#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */
-#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */
-#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */
-#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */
-
+/**** PHY_MARV_LED_OVER 16 bit r/w LED control */
enum {
- MO_LED_NORM = 0,
- MO_LED_BLINK = 1,
- MO_LED_OFF = 2,
- MO_LED_ON = 3,
+ PHY_M_LED_MO_DUP = 3<<10,/* Bit 11..10: Duplex */
+ PHY_M_LED_MO_10 = 3<<8, /* Bit 9.. 8: Link 10 */
+ PHY_M_LED_MO_100 = 3<<6, /* Bit 7.. 6: Link 100 */
+ PHY_M_LED_MO_1000 = 3<<4, /* Bit 5.. 4: Link 1000 */
+ PHY_M_LED_MO_RX = 3<<2, /* Bit 3.. 2: Rx */
+ PHY_M_LED_MO_TX = 3<<0, /* Bit 1.. 0: Tx */
+
+ PHY_M_LED_ALL = PHY_M_LED_MO_DUP | PHY_M_LED_MO_10
+ | PHY_M_LED_MO_100 | PHY_M_LED_MO_1000
+ | PHY_M_LED_MO_RX,
};
/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/
@@ -1294,9 +1291,9 @@ enum {
PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */
};
-#define PHY_M_FELP_LED2_CTRL(x) (((x)<<8) & PHY_M_FELP_LED2_MSK)
-#define PHY_M_FELP_LED1_CTRL(x) (((x)<<4) & PHY_M_FELP_LED1_MSK)
-#define PHY_M_FELP_LED0_CTRL(x) (((x)<<0) & PHY_M_FELP_LED0_MSK)
+#define PHY_M_FELP_LED2_CTRL(x) (((u16)(x)<<8) & PHY_M_FELP_LED2_MSK)
+#define PHY_M_FELP_LED1_CTRL(x) (((u16)(x)<<4) & PHY_M_FELP_LED1_MSK)
+#define PHY_M_FELP_LED0_CTRL(x) (((u16)(x)<<0) & PHY_M_FELP_LED0_MSK)
enum {
LED_PAR_CTRL_COLX = 0x00,
@@ -1552,8 +1549,8 @@ enum {
GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in
progress) */
};
-#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK)
-#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK)
+#define GM_SMI_CT_PHY_AD(x) (((u16)(x)<<11) & GM_SMI_CT_PHY_A_MSK)
+#define GM_SMI_CT_REG_AD(x) (((u16)(x)<<6) & GM_SMI_CT_REG_A_MSK)
/* GM_PHY_ADDR 16 bit r/w GPHY Address
Register */
enum {
--
1.4.1
--
Stephen Hemminger <[EMAIL PROTECTED]>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
