On Monday 12 April 2021 15:15:07 Andrew Lunn wrote:
> > +static u16 mv88e6xxx_physid_for_family(enum mv88e6xxx_family family);
> > +
> 
> No forward declaration please. Move the code around. It is often best
> to do that in a patch which just moves code, no other changes. It
> makes it easier to review.

Avoiding forward declaration would mean to move about half of source
code. mv88e6xxx_physid_for_family depends on mv88e6xxx_table which
depends on all _ops structures which depends on all lot of other
functions.

I wanted to create a small fixup patch which can be easily backported to
stable releases which are affected by this issue.

If you do not like forward declarations, I can create a followup patch
which moves this half of code in this file to avoid forward declaration.
But having it in one patch would mean to complicate reviewing code...

> >  static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
> >  {
> >     struct mv88e6xxx_mdio_bus *mdio_bus = bus->priv;
> > @@ -3040,24 +3042,9 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, 
> > int phy, int reg)
> >     err = chip->info->ops->phy_read(chip, bus, phy, reg, &val);
> >     mv88e6xxx_reg_unlock(chip);
> >  
> > -   if (reg == MII_PHYSID2) {
> > -           /* Some internal PHYs don't have a model number. */
> > -           if (chip->info->family != MV88E6XXX_FAMILY_6165)
> > -                   /* Then there is the 6165 family. It gets is
> > -                    * PHYs correct. But it can also have two
> > -                    * SERDES interfaces in the PHY address
> > -                    * space. And these don't have a model
> > -                    * number. But they are not PHYs, so we don't
> > -                    * want to give them something a PHY driver
> > -                    * will recognise.
> > -                    *
> > -                    * Use the mv88e6390 family model number
> > -                    * instead, for anything which really could be
> > -                    * a PHY,
> > -                    */
> > -                   if (!(val & 0x3f0))
> > -                           val |= MV88E6XXX_PORT_SWITCH_ID_PROD_6390 >> 4;
> > -   }
> > +   /* Some internal PHYs don't have a model number. */
> > +   if (reg == MII_PHYSID2 && !(val & 0x3f0))
> > +           val |= mv88e6xxx_physid_for_family(chip->info->family);
> >  
> >     return err ? err : val;
> >  }
> > @@ -5244,6 +5231,39 @@ static const struct mv88e6xxx_info 
> > *mv88e6xxx_lookup_info(unsigned int prod_num)
> >     return NULL;
> >  }
> >  
> > +/* This table contains representative model for every family */
> > +static const enum mv88e6xxx_model family_model_table[] = {
> > +   [MV88E6XXX_FAMILY_6095] = MV88E6095,
> > +   [MV88E6XXX_FAMILY_6097] = MV88E6097,
> > +   [MV88E6XXX_FAMILY_6185] = MV88E6185,
> > +   [MV88E6XXX_FAMILY_6250] = MV88E6250,
> > +   [MV88E6XXX_FAMILY_6320] = MV88E6320,
> > +   [MV88E6XXX_FAMILY_6341] = MV88E6341,
> > +   [MV88E6XXX_FAMILY_6351] = MV88E6351,
> > +   [MV88E6XXX_FAMILY_6352] = MV88E6352,
> > +   [MV88E6XXX_FAMILY_6390] = MV88E6390,
> > +};
> 
> This table is wrong. MV88E6390 does not equal
> MV88E6XXX_PORT_SWITCH_ID_PROD_6390. MV88E6XXX_PORT_SWITCH_ID_PROD_6390
> was chosen because it is already an MDIO device ID, in register 2 and
> 3. It probably will never clash with a real Marvell PHY ID. MV88E6390
> is just a small integer, and there is a danger it will clash with a
> real PHY.

So... how to solve this issue? What should be in the mapping table?

> > --- a/drivers/net/phy/marvell.c
> > +++ b/drivers/net/phy/marvell.c
> > @@ -3021,9 +3021,34 @@ static struct phy_driver marvell_drivers[] = {
> >             .get_stats = marvell_get_stats,
> >     },
> >     {
> > -           .phy_id = MARVELL_PHY_ID_88E6390,
> > +           .phy_id = MARVELL_PHY_ID_88E6341_FAMILY,
> >             .phy_id_mask = MARVELL_PHY_ID_MASK,
> > -           .name = "Marvell 88E6390",
> > +           .name = "Marvell 88E6341 Family",
> 
> You cannot just replace the MARVELL_PHY_ID_88E6390. That will break
> the 6390! You need to add the new PHY for the 88E6341.

I have not replaced anything. I just put there a new phy_id section for
88E6341. You are probably confused by 'git diff' output as quickly
looking at it, somebody can think that there is phy replacement. But
there is no replacement, I only added a new PHY. Entry for 88E6390 is
still there!

Also this is reason why I wanted to avoid big code movement. It will be
harder to read the 'git diff' output in this patch.

Reply via email to