https://bugs.freedesktop.org/show_bug.cgi?id=89558
--- Comment #9 from Ilia Mirkin <imir...@alum.mit.edu> --- heh, yeah, you're gonna have a bad time with this: [ 1.834852] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x118010a2 [ 1.834885] nouveau [ DEVICE][0000:03:00.0] Chipset: GM108 (NV118) How did you get that? I guess you copied the entire 0x117 section instead of just adding the "case 0x118" next to case 0x117? [not that there's anything wrong with that] [ 1.834915] nouveau [ DEVICE][0000:03:00.0] Family : NV110 [ 1.841397] nouveau [ VBIOS][0000:03:00.0] using image from ACPI [ 1.841487] nouveau [ VBIOS][0000:03:00.0] BIT signature found [ 1.841518] nouveau [ VBIOS][0000:03:00.0] version 82.08.13.00.1c [ 1.841817] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled [ 1.841890] nouveau [ PFB][0000:03:00.0] RAM type: DDR3 [ 1.841898] nouveau E[ PBUS][0000:03:00.0] MMIO read of 0x00000000 FAULT at 0x6013d4 [ IBUS ] That's the vga 0x3d4 port afaik... no display controller? no outputs in the dcb, so I guess that makes sense. Does it come up as a 3D Accelerator, or VGA compatible controller? [ 1.841966] nouveau [ PFB][0000:03:00.0] RAM size: -1159778304 MiB Seems like an awfully low amount of vram :) Can you boot with nouveau.debug=debug? That should provide some additional prints to work out how it gets to such a fun quantity. [ 1.841997] nouveau [ PFB][0000:03:00.0] ZCOMP: 0 tags [ 1.842052] nouveau E[ PBUS][0000:03:00.0] MMIO read of 0x00000000 FAULT at 0x10f65c [ IBUS ] [ 1.842169] nouveau E[ PBUS][0000:03:00.0] MMIO read of 0x00000000 FAULT at 0x17e280 [ IBUS ] [ 1.880555] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external [ 1.880602] nouveau [ PTHERM][0000:03:00.0] internal sensor: no [ 1.880672] nouveau [ CLK][0000:03:00.0] 07: core 405 MHz memory 810 MHz [ 1.880798] nouveau [ CLK][0000:03:00.0] 0a: core 270-1124 MHz memory 1600 MHz [ 1.880951] nouveau [ CLK][0000:03:00.0] 0f: core 270-1124 MHz memory 2002 MHz [ 1.881116] nouveau [ CLK][0000:03:00.0] --: core 13 MHz [ 1.911386] nouveau [ PGRAPH][0000:03:00.0] using external firmware [ 1.911429] nouveau 0000:03:00.0: Direct firmware load for nouveau/nv118_fuc409c failed with error -2 [ 1.911472] request_firmware returned -2 (0xf2cb3b64 'nouveau/nv118_fuc409c' 0xf2687864) [ 1.912817] nouveau 0000:03:00.0: Direct firmware load for nouveau/fuc409c failed with error -2 [ 1.914179] request_firmware returned -2 (0xf2cb3b64 'nouveau/fuc409c' 0xf2687864) [ 1.915536] nouveau E[ PGRAPH][0000:03:00.0] failed to load fuc409c [ 1.916912] vga_switcheroo: enabled [ 1.918346] [TTM] Zone kernel: Available graphics memory: 413022 kiB [ 1.919713] [TTM] Zone highmem: Available graphics memory: 4097762 kiB [ 1.921085] [TTM] Initializing pool allocator [ 1.922452] nouveau [ DRM] VRAM: -1159778304 MiB [ 1.923815] nouveau [ DRM] GART: 1048576 MiB [ 1.925179] nouveau E[ DRM] Pointer to TMDS table invalid [ 1.926537] nouveau [ DRM] DCB version 4.0 [ 1.927891] nouveau E[ DRM] Pointer to flat panel table invalid [ 1.939229] nouveau E[ PFIFO][0000:03:00.0] write fault at 0x0000070000 [UNBOUND_INST_BLOCK] from BAR3/HOST_CPU_NB on channel 0x0000000000 [unknown] [ 1.941398] nouveau E[ PFIFO][0000:03:00.0] DROPPED_MMU_FAULT 0x00000000 [ 1.942989] nouveau E[ PFIFO][0000:03:00.0] BIND_ERROR [ INVALID_CTX_TGT ] [ 1.944398] nouveau E[ PFIFO][0000:03:00.0] read fault at 0x0000000000 [UNBOUND_INST_BLOCK] from GR/VIP on channel 0x0000000000 [unknown] [ 1.945821] nouveau E[ PFIFO][0000:03:00.0] SCHED_ERROR [ UNK08 ] [ 1.948423] nouveau E[ PFIFO][0000:03:00.0] SCHED_ERROR [ UNK06 ] [ 1.951026] nouveau E[ PFIFO][0000:03:00.0] SCHED_ERROR [ UNK06 ] I'm very willing to believe that these issues are all caused by the negative vram size. -- You are receiving this mail because: You are the assignee for the bug.
_______________________________________________ Nouveau mailing list Nouveau@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/nouveau
