Dear Hans,
Thank you for the nice and straightforward solution. I have tested it
locally and it works. I hope it will be in the next release (should I do
anything?).
By the way, I have a couple of other small issues. I will describe them in
detail in other threads of this mailing list if it is the right place to do
so.
Best regards,
Yaroslav
пн, 30 янв. 2023 г. в 12:52, Hans Hagen via ntg-context <ntg-context@ntg.nl
>:
> On 1/29/2023 5:03 PM, Yaroslav Beltukov via ntg-context wrote:
> > Dear Hans and all contributors,
> >
> > I really appreciate ConTeXt for the right way to obtain high quality
> > documents. I'm a theoretical physicist and I'm going to write a book. I
> > think ConTeXt is the right choice to work with a number of formulas,
> > figures and cross-references. The visual quality of formulas is better
> > than in regular LaTeX. The new feature with formula autosplitting looks
> > also very promising. For me it is important to obtain the high quality
> > without a lot of manual tweaks of each formula for each given document
> > format and figure placement.
> >
> > However, I have found a problem with references if I compile one
> > component only. The references to formulas in other components have
> > wrong prefixes, e.g. (2.1) instead of (3.1). Needless to say, the right
> > formula references are very important.
> >
> > I started looking into this issue. The references to other components
> > are taken from the whole product as from an external document. It turned
> > out that this is a general problem with references with prefixes to
> > external documents. The prefix is stored in a tuc file as a reference to
> > a section as a sequential number of the header in the document. As a
> > result, the prefix from the external document is calculated using the
> > structure of the current document.
> >
> > Here is the MWE, which consists of two files:
> > foo.tex:
> >
> > \defineenumeration[remark][prefix=yes, prefixsegments=chapter:section]
> >
> > \starttext
> >
> > Equations: \in[eq1], \in[eq2], \in[eq3], \in[eq4]
> >
> > Sections: \in[sec1], \in[sec2], \in[sec3], \in[sec4]
> >
> > Chapters: \in[chap1], \in[chap2], \in[chap3], \in[chap4]
> >
> > Remarks: \in[remark1], \in[remark2]
> >
> > \startbodymatter
> >
> > \chapter[chap1]{Chapter}
> > \placeformula[eq1]\startformula x = y\stopformula
> > \chapter[chap2]{Chapter}
> > \section[sec1]{Section}
> > \section[sec2]{Section}
> > \placeformula[eq1]\startformula x = y\stopformula
> > \placeformula[eq2]\startformula x = y\stopformula
> >
> > \stopbodymatter
> >
> > \startappendices
> >
> > \chapter[chap3]{Chapter}
> > \section[sec3]{Section}
> > \placeformula[eq3]\startformula x = y\stopformula
> > \section[sec4]{Section}
> > \startremark[remark1]\stopremark
> > \placeformula[eq4]\startformula x = y\stopformula
> > \startremark[remark2]\stopremark
> > \chapter[chap4]{Chapter}
> >
> > \stopappendices
> >
> > \stoptext
> >
> >
> > bar.tex:
> >
> > \starttext
> >
> > Equations: \in[foo::eq1], \in[foo::eq2], \in[foo::eq3], \in[foo::eq4]
> >
> > Sections: \in[foo::sec1], \in[foo::sec2], \in[foo::sec3], \in[foo::sec4]
> >
> > Chapters: \in[foo::chap1], \in[foo::chap2], \in[foo::chap3],
> \in[foo::chap4]
> >
> > Remarks: \in[foo::remark1], \in[foo::remark2]
> >
> > % any chapters and sections here
> >
> > \stoptext
> >
> > It is expected to have the same first page on these documents:
> >
> > Equations: 1.1, 2.2, A.1, A.2
> > Sections: 2.1, 2.2, A.1, A.2
> > Chapters: 1, 2, A, B
> > Remarks: A.2.1, A.2.2
> >
> > However, the bar.tex produces wrong prefixes to formulas and remarks.
> > The output depends on the document structure of bar.tex, not foo.tex.
> >
> > I started looking into the source code. Thanks to lua, it is not a big
> > deal to track the problem. The prefixdata is complemented by the
> > sectiondata after the loading the tuc file. So, the question is: is it
> > possible to store the full prefixdata with all necessary prefix numbers
> > in the tuc file? Here is my proposal to change the source code:
> >
> > --- strc-lst-old.lmt 2023-01-29 11:30:15.610309948 +0300
> > +++ strc-lst.lmt 2023-01-29 12:10:08.864228923 +0300
> > @@ -266,6 +266,16 @@
> > if r and not r.section then
> > r.section = structures.sections.currentid()
> > end
> > + -- store sectiondata in prefixdata (necessary for external files)
> > + if t.prefixdata and r.section then
> > + local sectiondata = structures.sections.collected[r.section]
> > + if sectiondata then
> > + for k, v in next, sectiondata do
> > + t.prefixdata[k] = v
> > + end
> > + end
> > + end
> > + --
> > local b = r and t.block
> > if r and not b then
> > local s = r.section
> >
> > --- strc-ref-old.lmt 2023-01-29 11:30:15.823643904 +0300
> > +++ strc-ref.lmt 2023-01-29 12:07:45.697109862 +0300
> > @@ -2318,7 +2318,17 @@
> > if data then
> > numberdata = lists.reordered(data) -- data.numberdata
> > if numberdata then
> > - helpers.prefix(data,prefixspec)
> > + -- helpers.prefix(data,prefixspec)
> > + -- use the actual numbers from prefixdata
> > + local prefixdata = data.prefixdata
> > + if prefixdata then
> > + -- adapted from helpers.prefix (not sure)
> > + if (prefixspec and prefixspec == no) or
> > prefixdata.prefix == no then
> > + prefixdata = false
> > + end
> > + sections.typesetnumber(prefixdata,"prefix", prefixspec
> > or false, prefixdata)
> > + end
> > + --
> >
> > sections.typesetnumber(numberdata,"number",numberspec,numberdata)
> > else
> > local useddata = data.useddata
> >
> > After this small change, all the references are correct. However, I'm
> > quite new to ConTeXt, so maybe here are some caveats. It would be great
> > to fix the references to formulas, especially for the forthcoming
> > document about maths.
> that will bloat the already large tuc file, so here is an alternative (i
> bet you can find where to patch):
>
> strc-ref
>
> local external = struc.references.collected -- direct references
> local lists = struc.lists.collected -- indirect
> references (derived)
> local pages = struc.pages.collected -- pagenumber data
> local sections = struc.sections.collected
>
> and
>
> if prefix == "" then
> prefix = name -- this can clash!
> end
> local section = references.section
> if section then
> if sections then
> references.sectiondata = sections[section]
> else
> -- warning
> end
> end
>
> strc-pag:
>
> local sectiondata = references.sectiondata or
> sections.collected[references.section]
> if not sectiondata then
> return entry, false, "no section data"
> end
>
> there might be a few more such places where we can bind to the loaded data
>
> Hans
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
> -----------------------------------------------------------------
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> https://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : https://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : https://contextgarden.net
>
> ___________________________________________________________________________________
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
webpage : https://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : https://contextgarden.net
___________________________________________________________________________________
