On 6/20/2017 4:15 PM, Gerion Entrup wrote:
Am Dienstag, 20. Juni 2017, 13:25:42 CEST schrieb Gerion Entrup:
Am Dienstag, 20. Juni 2017, 11:45:19 CEST schrieb Henri Menke:
On Mon, 2017-06-19 at 02:34 +0200, Gerion Entrup wrote:
Good day,
I'm very new to ConTeXt, so maybe this is a fairly simple question.
I want to use TikZ in the document. The specific part of the document is:
---- snip ----
\usemodule[tikz]
\usetikzlibrary[positioning]
---- /snip -----
The problem seems to be that ConTeXt does not find the TikZ module. I use mkiv.
The relevant
output:
---- snip -----
% context test-document.tex
mtx-context | run 1: luatex --fmt="/home/gerion/.texlive/texmf-var/luatex-
cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en"
--jobname="test-document"
--lua="/home/gerion/.texlive/texmf-var/luatex-
cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui"
--no-parse-first-line
--c:currentrun=1 --c:fulljobname="./test-document.tex"
--c:input="./test-document.tex" --
c:kindofrun=1 --c:maxnofruns=9 "cont-yes.mkiv"
This is LuaTeX, Version 1.0.4 (TeX Live 2017)
system commands enabled.
open source > 1 > 1 >
/usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int:
english/english
system > 'cont-new.mkiv' loaded
open source > 2 > 2 >
/usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv
close source > 2 > 2 >
/usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv
system > files > jobname 'test-document', input './test-document',
result 'test-document'
fonts > latin modern fonts are not preloaded
languages > language 'en' is active
open source > 2 > 3 >
/home/gerion/sourcecode/grisu/test-document/test-document.tex
colors > 'rgb' color space is supported
colors > 'cmyk' color space is supported
resolvers > modules > 'tikz' is not found
tex error > tex error on line 6 in file
/home/gerion/sourcecode/test-document/test-
document.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.6 \usetikzlibrary
[positioning]
1 \mainlanguage[de]
2
3 \setupcolors[state=start]
4
5 \usemodule[tikz]
6 >> \usetikzlibrary[positioning]
7
----- /snip -----
Using TikZ within LaTeX is no problem in this distribution. Is this a problem
of TeX Live (or the
distribution packaging)?
I've looked in the installed files of texlive-context and other modules are
installed, even
modules that require TikZ (eg. gantt).
With TL 2017 the following example works as without problems. Post a minimal
example to reproduce
your problem, otherwise we can't help you. Also, your problem suggests a
faulty TL installation.
\usemodule[tikz]
\usetikzlibrary[positioning]
\starttext
\tikz\node{Hello World!};
\stoptext
Thanks so far. This exact example leads to the same error:
------- snip ------
% context test.tex
mtx-context | run 1: luatex
--fmt="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en"
--jobname="test"
--lua="/home/gerion/.texlive/texmf-var/luatex-cache/context/0399a8df3aef8d154781d0a9c2b8e28d/formats/luatex/cont-en.lui"
--no-parse-first-line --c:currentrun=1 --c:fulljobname="./test.tex" --c:input="./test.tex" --c:kindofrun=1
--c:maxnofruns=9 "cont-yes.mkiv"
This is LuaTeX, Version 1.0.4 (TeX Live 2017)
system commands enabled.
open source > 1 > 1 >
/usr/share/texmf-dist/tex/context/base/mkiv/cont-yes.mkiv
ConTeXt ver: 2016.05.17 19:20 MKIV current fmt: 2017.6.11 int:
english/english
system > 'cont-new.mkiv' loaded
open source > 2 > 2 >
/usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv
close source > 2 > 2 >
/usr/share/texmf-dist/tex/context/base/mkiv/cont-new.mkiv
system > files > jobname 'test', input './test', result 'test'
fonts > latin modern fonts are not preloaded
languages > language 'en' is active
open source > 2 > 3 > /home/gerion/sourcecode/context-test/test.tex
resolvers > modules > 'tikz' is not found
tex error > tex error on line 2 in file
/home/gerion/sourcecode/context-test/test.tex: ! Undefined control sequence
<recently read> \usetikzlibrary
l.2 \usetikzlibrary
[positioning]
1 \usemodule[tikz]
2 >> \usetikzlibrary[positioning]
3
4 \starttext
5
6 \tikz\node{Hello World!};
7
8 \stoptext
9
------------ /snip --------
I ran "mtxrun --generate" before using context. Is there anything else I
can do (run another command etc.)? Otherwise I'll file a bug in my
distribution (I use Gentoo).
Do you know a way to quickfix it?
Update: The entire pgf folder in the third party module folder is missing
in my distribution package. Copying the folder from a fresh Texlive
installation does not work. I've filed a bug in my distribution. The
problem seems to be there.
you probably need to install context from the garden with
--modules=all
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________