thanks Arjen I found the Man page, have set it up, but still have some problems
this is a log of it : -------------------------------- battery.charge: 100.0 battery.voltage: 2.27 battery.voltage.nominal: 0.0 driver.name: bestups driver.parameter.ID: 610,700,240,240,0.0,0.0 driver.parameter.port: /dev/cuaa1 driver.version: 2.0.5 driver.version.internal: 1.03 input.frequency: 49.9 input.voltage: 246.1 output.voltage: 238.0 ups.load: 007 ups.mfr: Best Power ups.model: 610 700 ups.status: OL ups.temperature: 27.0 ------------------------------- The config file is : ------------------------- [sola] ID = 610,700,240,240,0.0,0.0 driver = bestups port = /dev/cuaa1 I had to put 0.0,0.0 to stop it from saying it was not charged. But as you can see: battery.charge: 100.0 battery.voltage: 2.27 battery.voltage.nominal: 0.0 "battery.voltage" should be alot higher,the win CheckUPSII Says it should be 27V not 2.27 if I change the last 2 in the ID to be what is ment to "20.0,27.4" i get" battery.charge: -239.6 battery.voltage: 2.27 battery.voltage.nominal: 27.4 .... Does any one know why it does this regards shane nut _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser