Citeren Richard <richard-...@rain4us.net>:
The nut ups daemons seem to be communicating with the UPS but upscmd
gives me no joy. Running commands do nothing and produce no output.
This is something that needs fixing in 'upscmd'. It erroneously
doesn't print the server response after sending off a command, which
is very confusing. I already fixed this in the development version a
couple of minutes ago.
Using the web interface returns an authentication failure and that
is the only clue I have. I believe I have everything setup
correctly but it's not working. Can someone review this and give me
clues as to what I should research next?
<ups.conf>
[Hagrid]
driver = usbhid-ups
port = /dev/apcusb
product = "Smart-UPS 2200 XL FW:690.19.D USB FW:7.4"
serial = JS1005032730
desc = "Primary 2200XL with huge battery pack - the big guy"
Looks good.
<upsmon.conf>
MONITOR hag...@localhost 1 nutmon easy master
Fine.
<upsd.users>
[nutmon]
password = easy
nutmon master # or upsmon slave
If this is all there is in this file, you've missed setting up the
permitted instcmds and actions for this user. See 'man 5 upsd.users'
for an explanation. Failing to set this up, will default to not
allowing instcmds and variable settings at all.
Best regards, Arjen
--
Please keep list traffic on the list (off-list replies will be rejected)
_______________________________________________
Nut-upsuser mailing list
Nut-upsuser@lists.alioth.debian.org
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
