Hi Mario, first, please keep the traffic on the list.
2012/2/28 Mario Giammarco <mgiamma...@gmail.com>: > Here it is: > > [mieionline] > driver = blazer_usb > protocol = zinto > port = auto > desc = "yunto q700" > # subdriver = zinto > vendorid = 06da > productid = 0601 > > But please note that I have done: "man blazer_usb" and I see no > protocol option. I am using the ubuntu 11.10 version 2.6.1-2ubuntu2 everything is fine in your ups.conf, and with your setup. I've even tested it with the same setup (ubuntu and nut 2.6.1-2ubuntu2): $ sudo upsdrvctl start blazer Network UPS Tools - UPS driver controller 2.6.2 Network UPS Tools - Megatec/Q1 protocol USB driver 0.03 (2.6.2) Duplicate driver instance detected! Terminating other driver! Supported UPS detected with zinto protocol Vendor information unavailable Battery runtime will not be calculated (runtimecal not set) so it's either an old version that was still running, or another obscure error. can you please try again, ensuring that you're using the right binaries? cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer - http://www.debian.org Free Software Developer - http://arnaud.quette.free.fr/ > 2012/2/28 Arnaud Quette <aquette....@gmail.com>: >> 2012/2/27 Mario Giammarco <mgiamma...@gmail.com>: >>> I am not able to do the test >>> When I put "protocol=zinto" I get: >>> >>> Fatal error: 'protocol' is not a valid variable name for this driver. >>> >>> I have also tried subdriver=zinto without luck >> >> could you please send back your ups.conf. >> >> cheers, >> Arno _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
