I'm running NUT 2.6.3 on Debian wheezy [ with a 3.3.0 i686 kernel ] I've installed NUT via Debian APT [ package nut version 2.6.3-1 ] I have a REDi Blazer 600VA (BLAZER600c) UPS and I want to detect power failures. I have tried the following drivers: * gamatronic: Can't talk to UPS on port /dev/ttyS1! * bestups: Unable to detect a Best/SOLA or Phoenix protocol UPS * blazer_ser: No supported UPS detected
I have also tried genericups with upstype=4, upstype=13, then I set OL to -DCD, then to -RNG, with no change when I cut the power Then I restored the power and ran statserial, which showed [*]. Cutting the power didn't change anything What should I try/do next? [*] statserial output: Device: /dev/ttyS1 Signal Pin Pin Direction Status Full Name (25) (9) (computer) Name ----- --- --- --------- ------ ----- FG 1 - - - Frame Ground TxD 2 3 out - Transmit Data RxD 3 2 in - Receive Data RTS 4 7 out 1 Request To Send CTS 5 8 in 0 Clear To Send DSR 6 6 in 0 Data Set Ready GND 7 5 - - Signal Ground DCD 8 1 in 0 Data Carrier Detect DTR 20 4 out 1 Data Terminal Ready RI 22 9 in 0 Ring Indicator -- Marius Gavrilescu (science-kids) Rain is saved up in cloud banks.
signature.asc
Description: Digital signature
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser