Hi all.
Yes, parameter Ups.PowerSummary.Voltage from debug seems to be а nominal value.
But Eaton programmers know the way to take real value, may be somebody else too? :-)
I really like NUT, but this value is very important for us...
Any ideas?
---
Valeri
11.11.2014, 12:01, "Charles Lepple" <clep...@gmail.com>:
On Nov 10, 2014, at 6:44 PM, Valeri Linchevski <linc...@ya.ru> wrote:
Parameter, "blabla" :-) really is Ups.PowerSummary.Voltage, debug output is in attach.Apparently some models are missing from the table that is consulted for "mge_type":
https://github.com/networkupstools/nut/blob/master/drivers/mge-hid.c#L201
Arnaud or Emilien,
Is there any way we could get the HID dump from a few of the other Powerware models to extend the following table?
https://github.com/networkupstools/nut/blob/master/drivers/mge-hid.c#L82
--
Charles Lepple
clepple@gmail
_______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
