2015-03-11 21:43 GMT+01:00 Jakub Scepka (private) <jakub.sce...@gmail.com>: > Thank you for the commands... > Please find attached log...
Looking at the log it seems that the only commands understood by the UPS are the two shutdown.return with ups.delay.start=0. If this is the case, I must confess I was sort of expecting something like this as the other ups.delay.{start,shutdown}s and shutdown.stayoff/load.off imply the use of 'SnRm' command which is too long to fit in one 8 bytes interrupt (and then the driver has to use 2 interrupts). > Im not sure if the Load.on worked, because in the end I had to manually > start the UPS (with button). > Anyway, let me know should I need to perform some steps again (probably yes, > since I believe it was off). But.. you say the UPS at the end of the test was off - so I'm a bit puzzled now: I need you to help me clear my mind. A little more testing and logs to produce. First, put a dummy load (something like a lamp should suffice) under UPS protection; cut the power to the UPS (but leave it grounded, I don't want to have you on my conscience) to put it on battery. Then, yet again: - terminal #1 - as root: nutdrv_qx -a ups -DDDDD >> /path/to/my/precious/log 2>&1 - terminal #2 - as root: upsd -D - terminal #3: upsrw -s ups.delay.shutdown=30 -u <username> -p <password> ups upsrw -s ups.delay.start=0 -u <username> -p <password> ups upscmd -u <username> -p <password> ups shutdown.return # Wait ~15 seconds, then: upscmd -u <username> -p <password> ups shutdown.stop # Does this stop the shutdown? If so, wait ~60 seconds then: upscmd -u <username> -p <password> ups shutdown.return # Then wait till the UPS shutdowns the load (does it happen?); wait one minute or so and then give back power to the UPS. # In a short time frame the UPS should now start again bringing back power to the attached load: does this happen? # Now, just to confirm that the various 'SnRm' commands don't work, cut again the power to the UPS and then: upsrw -s ups.delay.shutdown=30 -u <username> -p <password> ups upsrw -s ups.delay.start=60 -u <username> -p <password> ups upscmd -u <username> -p <password> ups shutdown.return # Wait ~60 seconds: does the UPS shutdown the load? _______________________________________________ Nut-upsuser mailing list Nut-upsuser@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser