Before you can configure cluster, o2cb service must be up. You can use this command to check its status:
$ /etc/init.d/o2cb status It is recommended to configure o2cb to auto start when the server boots. Use this command to configure the auto start: # /etc/init.d/oc2b configure Hope this helps, George -----Original Message----- From: Sunil Mushran [mailto:[EMAIL PROTECTED] Sent: Thursday, July 27, 2006 7:43 PM To: [EMAIL PROTECTED] Cc: ocfs2-users@oss.oracle.com Subject: Re: [Ocfs2-users] OCFS2: Could not start cluster stack Check the support guide on cluster start/stop in the doc section on http://oss.oracle.com/projects/ocfs2. Vicki Luo wrote: > I installed OCFS2 on RHEL4 with ocfs2-2.6.9-22.ELsmp-1.2.2-1.i686.rpm. When > I start ocfs2console and click on Cluster, and then Configure Nodes, it > returns a dialog with the following message "Could not start cluster stack. > This must be resolved before any OCFS2 filesystem can be mounted " > Here is some information about my system: > 1. Uname -a > Linux SDCHS40I030 2.6.9-22.ELsmp #1 SMP Mon Sep 19 18:32:14 EDT 2005 i686 > i686 i386 GNU/Linux > 2. rpm -qa|grep ocfs2 > ocfs2-tools-1.2.1-1 > ocfs2console-1.2.1-1 > ocfs2-2.6.9-22.ELsmp-1.2.2-1 > > 3. rpm -qa | grep kernel > kernel-smp-2.6.9-5.EL > kernel-utils-2.4-13.1.48 > kernel-2.6.9-5.EL > kernel-smp-2.6.9-22.EL > > I saw a few solution posted, for example: depmod -a , then try again. Or > "SELINUX=disabled" > I did both of them , but I still got the error message. > Can anybody help me? What else could be wrong? > > Thanks, > Vicki > > > _______________________________________________ > Ocfs2-users mailing list > Ocfs2-users@oss.oracle.com > http://oss.oracle.com/mailman/listinfo/ocfs2-users > _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users