Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess?
ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: > What does this return? > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > > Also, do: > ls -lR /sys/kernel/debug/ocfs2 > ls -lR /sys/kernel/debug/o2dlm > > On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >> Here is the output: >> >> ls -lR /sys/kernel/config/cluster >> /sys/kernel/config/cluster: >> total 0 >> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >> >> /sys/kernel/config/cluster/CLUSTER: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >> drwxr-xr-x 3 root root 0 Oct 19 00:12 heartbeat >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >> drwxr-xr-x 4 root root 0 Oct 11 20:23 node >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat: >> total 0 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 >> 918673F06F8F4ED188DDCE14F39945F6 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >> >> >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >> >> /sys/kernel/config/cluster/CLUSTER/node: >> total 0 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> >> >> >> On 10/19/2011 00:12, Sunil Mushran wrote: >>> ls -lR /sys/kernel/config/cluster >>> >>> What does this return? >>> >>> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >>>> Hi, >>>> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >>>> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >>>> My problem is that all the time when i try to run /etc/init.d/o2cb >>>> stop >>>> it fails with this error: >>>> Stopping O2CB cluster CLUSTER: Failed >>>> Unable to stop cluster as heartbeat region still active >>>> There is no active mount point. I tried to manually stop the >>>> heartdbeat >>>> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after >>>> finding >>>> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). >>>> But even if refs number is set to zero the "heartbeat region still >>>> active" occurs. >>>> How can i fix this? >>>> >>>> Thank you in advance. >>>> Laurentiu. >>>> >>>> >>>> _______________________________________________ >>>> Ocfs2-users mailing list >>>> Ocfs2-users@oss.oracle.com >>>> http://oss.oracle.com/mailman/listinfo/ocfs2-users >>> >> > _______________________________________________ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users