Interesting. So your switch configuration is set to nail the ports at 10Gbe rather than allow autoneg?
/dale > On Oct 12, 2016, at 12:29 PM, Garland McAlexander <garl...@bustle.com> wrote: > > No no, I understood. > > When I set it to 0 and back to 1, the link will lose connection. > > On Wed, Oct 12, 2016 at 12:25 PM, Dale Ghent <da...@omniti.com> wrote: > > Oof, I realized I may not have been clear in how I worded that. What I meant > to ask is: > > What happens when you set en_10gfdx_cap to 0, then back to 1 ? > > > On Oct 12, 2016, at 12:23 PM, Garland McAlexander <garl...@bustle.com> > > wrote: > > > > Hah, yes, I tried with both interface 0 and 1. > > > > Changing that back and forth has no change. > > > > Both ixgbe0 and ixgbe1 will show as either 1000 when my switch ports are > > set to auto, and will show as STATE - Down and SPEED - 0 when I set my > > switch ports to 10GbE. > > > > On Wed, Oct 12, 2016 at 12:19 PM, Dale Ghent <da...@omniti.com> wrote: > > > > I trust you set N to the interface instance of ixgbe :) (eg; ixgbe0) > > > > how about setting that to 0, then back to 1? > > > > /dale > > > > > On Oct 12, 2016, at 11:59 AM, Garland McAlexander <garl...@bustle.com> > > > wrote: > > > > > > Yes, I'm getting a 1GbE link. > > > > > > Randomly it'll work as 10GbE after a reboot, but another reboot will > > > cause it to go back to 1GbE. > > > > > > Running 'dladm set-linkprop en_10gfdx_cap=1 ixgbeN' has no change. > > > > > > On Fri, Oct 7, 2016 at 1:07 PM, Dale Ghent <da...@omniti.com> wrote: > > > On Oct 7, 2016, at 11:44 AM, Garland McAlexander <garl...@bustle.com> > > > wrote: > > > > > > > > Hi All, > > > > > > > > I'm unable to link at 10GbE with my onboard X540 (X10DRW-iT). It works > > > > perfectly fine at 10GbE if using Windows or CentOS on the same machine. > > > > Just to be safe, I've tried multiple switches and Cat6a cabling. > > > > > > > > Any tips on how to get this going? > > > > > > Are you getting a 1Gb link instead of a 10Gb link? > > > > > > Can you run this: > > > > > > dladm set-linkprop en_10gfdx_cap=1 ixgbeN > > > > > > And check the link speed afterwards (dladm show-phys) > > > > > > /dale > > > > > > > > > > > > > > > -- > > > Garland McAlexander > > > > > > Technology Manager > > > > > > E: garl...@bustle.com > > > > > > <image001.png> > > > > > > > > > > > > > -- > > Garland McAlexander > > > > Technology Manager > > > > E: garl...@bustle.com > > > > <image001.png> > > > > > > > -- > Garland McAlexander > > Technology Manager > > E: garl...@bustle.com > > <image001.png> > _______________________________________________ OmniOS-discuss mailing list OmniOS-discuss@lists.omniti.com http://lists.omniti.com/mailman/listinfo/omnios-discuss