I'm running with 3.3.3 which is pretty recent.

The "Redhat 3965 IB kernel" came up fine on an Intel Shasta box (don't
know the exact
model# etc).

It looks like the problem is system dependent and reproducible on Dell 2650's.

Has anybody lately tested on a Dell 2650?

Btw, if I comment out  mthca_reset() in mthca_main.c, then the drivers
load and ports go active on the 2650.

I suggest somebody review the reset path in mthca... In the past we
have had problems reseting Tavor on some platforms and chose not to
reset at driver load time.

Ranjit

On 1/5/06, Grant Grundler <[EMAIL PROTECTED]> wrote:
> On Thu, Jan 05, 2006 at 02:46:42PM -0800, Bob Woodruff wrote:
> > Ranjit wrote,
> > >fw rev: 3.03.0003rc16b
> >
> > I think that 4.7 is the latest (at least for the PCI-E cards)
> > and 3.2 ( for the PCI-X cards)
>
> Latest for PCI-X is 3.3.5.
> Latest for PCI-e is 4.7.4.
> The 3.3.3 is likely to refer to a PCI-X card.
>
> See the openib wiki page:
>         https://openib.org/tiki/tiki-index.php?page=MellanoxHcaFirmware
>
> (also has link to mellanox firmware support site)
>
> grant
>
> > and I think the latest FW is required for correct operation with the openIB
> > stack.
> > Michael is this correct ?
> >
> > woody
> >
> >
> > _______________________________________________
> > openib-general mailing list
> > openib-general@openib.org
> > http://openib.org/mailman/listinfo/openib-general
> >
> > To unsubscribe, please visit 
> > http://openib.org/mailman/listinfo/openib-general
> _______________________________________________
> openib-general mailing list
> openib-general@openib.org
> http://openib.org/mailman/listinfo/openib-general
>
> To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
>
_______________________________________________
openib-general mailing list
openib-general@openib.org
http://openib.org/mailman/listinfo/openib-general

To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general

Reply via email to