On Tue, 02 Nov 2021 13:37:16 -0700, [email protected] wrote:
> From: Jae Hyun Yoo <[email protected]>
> 
> Add 'clocks' as a required property.
> 
> Signed-off-by: Jae Hyun Yoo <[email protected]>
> ---
> v1 -> v2:
> Changes sinve v1:
>  - Added 'clocks' property into kcs-bmc bindings using
>    'aspeed,ast2400-kcs-bmc.yaml' because it's not merged into
>    'aspeed-lpc.yaml' yet. The bindings merging could be done using a
>    separate patch later.
> 
>  .../devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml   | 7 +++++++
>  1 file changed, 7 insertions(+)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1549943


kcs@114: 'clocks' is a required property
        arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dt.yaml

kcs@24: 'clocks' is a required property
        arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dt.yaml

kcs@28: 'clocks' is a required property
        arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dt.yaml

kcs@2c: 'clocks' is a required property
        arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dt.yaml
        arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dt.yaml



_______________________________________________
Openipmi-developer mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openipmi-developer

Reply via email to