> When does someone use rgmii-txid and rgmii-rxid?
When there is an extra long RX clock line on the PCB, but not the TX
clock line, you would use rgmii-txid. If there is an extra long TX
clock line, but not RX clock, you would use rgmii-rxid. You do not see
this very often, but it does exist:
arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
/* RGMII delays added via PCB traces */
&enet2 {
phy-mode = "rgmii";
status = "okay";
Andrew
_______________________________________________
Openipmi-developer mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openipmi-developer
