This is an automated email from Gerrit. Spencer Oliver ([email protected]) just uploaded a new patch set to Gerrit, which you can find at http://openocd.zylin.com/682
-- gerrit commit 6ff7fcde47135778d8741a68dd2e75379b3d51a9 Author: Spencer Oliver <[email protected]> Date: Tue May 29 16:01:21 2012 +0100 docs: update interface support in README Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd Signed-off-by: Spencer Oliver <[email protected]> diff --git a/README b/README index c6186b2..3a473c7 100644 --- a/README +++ b/README @@ -210,52 +210,84 @@ options may be available there: --enable-dummy Enable building the dummy JTAG port driver + --enable-parport Enable building the pc parallel port driver + --disable-parport-ppdev Disable use of ppdev (/dev/parportN) for parport + (for x86 only) + --enable-parport-giveio Enable use of giveio for parport (for CygWin only) + + --enable-ft2232_libftdi Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX --enable-ft2232_ftd2xx Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com + --enable-usb_blaster_libftdi + Enable building support for the Altera USB-Blaster + using the libftdi driver, opensource alternate of + FTD2XX + --enable-usb_blaster_ftd2xx + Enable building support for the Altera USB-Blaster + using the FTD2XX driver from ftdichip.com + + --enable-amtjtagaccel Enable building the Amontec JTAG-Accelerator driver + + --enable-zy1000-master Use ZY1000 JTAG master registers + --enable-zy1000 Enable ZY1000 interface + + --enable-ioutil Enable ioutil functions - useful for standalone + OpenOCD implementations + + --enable-ep93xx Enable building support for EP93xx based SBCs + + --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs + --enable-gw16012 Enable building support for the Gateworks GW16012 JTAG Programmer - --enable-parport Enable building the pc parallel port driver - --disable-parport-ppdev Disable use of ppdev (/dev/parportN) for parport - (for x86 only) - --enable-parport-giveio Enable use of giveio for parport (for CygWin only) - --enable-presto_libftdi Enable building support for ASIX Presto Programmer using the libftdi driver --enable-presto_ftd2xx Enable building support for ASIX Presto Programmer using the FTD2XX driver - --enable-amtjtagaccel Enable building the Amontec JTAG-Accelerator driver - --enable-arm-jtag-ew Enable building support for the Olimex ARM-JTAG-EW + --enable-usbprog Enable building support for the usbprog JTAG Programmer + + --enable-oocd_trace Enable building support for some prototype + OpenOCD+trace ETM capture hardware + --enable-jlink Enable building support for the Segger J-Link JTAG Programmer + + --enable-vsllink Enable building support for the Versaloon-Link JTAG + Programmer + --enable-rlink Enable building support for the Raisonance RLink JTAG Programmer --enable-ulink Enable building support for the Keil ULINK JTAG Programmer - --enable-usbprog Enable building support for the usbprog JTAG - Programmer - --enable-vsllink Enable building support for the Versaloon-Link JTAG + --enable-arm-jtag-ew Enable building support for the Olimex ARM-JTAG-EW Programmer - --enable-oocd_trace Enable building support for the OpenOCD+trace ETM - capture device + --enable-buspirate Enable building support for the Buspirate - --enable-ep93xx Enable building support for EP93xx based SBCs - --enable-at91rm9200 Enable building support for AT91RM9200 based SBCs + --enable-stlink Enable building support for the ST-Link JTAG + Programmer - --enable-zy1000 Enable ZY1000 interface + --enable-osbdm Enable building support for the OSBDM (JTAG only) + Programmer + + --enable-opendous Enable building support for the estick/opendous JTAG + Programmer --enable-minidriver-dummy Enable the dummy minidriver. - --enable-ioutil Enable ioutil functions - useful for standalone - OpenOCD implementations + --disable-internal-jimtcl + Disable building internal jimtcl + --enable-libusb0 Use libusb-0.1 library for USB JTAG devices + --enable-remote-bitbang Enable building support for the Remote Bitbang jtag + driver --disable-doxygen-html Disable building Doxygen manual as HTML. --enable-doxygen-pdf Enable building Doxygen manual as PDF. -- ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
