I'm trying to reset halt BeagleBone board. After executing "reset halt" I get following:
> reset halt JTAG tap: am335x.jrc tap/device found: 0x0b94402f (mfg: 0x017, part: 0xb944, ver : 0x0) JTAG tap: am335x.dap enabled Locking debug access failed on first, but succeeded on second try. am335x.cpu: ran after reset and before halt ... target state: halted target halted in ARM state due to debug-request, current mode: Supervisor cpsr: 0x20000193 pc: 0x0002086c MMU: disabled, D-Cache: disabled, I-Cache: disabled but the systems resets after a second or so. If I enter u-boot and issue "halt", the system halt and resumes after I issue "resume". Can someone confirm such behavior? OpenOCD version: Open On-Chip Debugger 0.6.0-dev-00599-ga21affa (2012-05-30-15:47) Yegor ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ OpenOCD-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/openocd-devel
