Hello,
I'm using beaglebone and i loaded TI's starterware binaries: MLO and app
as indicated in the quick start quide of starterware. I started openocd with
"sudo openocd -f board/ti_beaglebone.cfg" command and connected via
telnel with "telnet localhost 4444" command. Nothing is wrong yet.
In openocd user guide it is told that "reset halt" command resets all targets
and immediately halts targets. When i used "reset halt" i got this message:
JTAG tap: am335x.jrc tap/device found: 0x0b94402f (mfg: 0x017, part: 0xb944,
ver: 0x0)
JTAG tap: am335x.dap enabled
Locking debug access failed on first, but succeeded on second try.
am335x.cpu: ran after reset and before halt ...
target state: halted
target halted in ARM state due to debug-request, current mode: System
cpsr: 0x0000011f pc: 0x800a3104
MMU: enabled, D-Cache: disabled, I-Cache: enabled
pc is at address 0x800a3104. Souldn't it be at bootloader address while "reset
halt"
stops the target immediately after reset ?
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
OpenOCD-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openocd-devel
