On Fri, Oct 11, 2013 at 06:12:37PM +0200, Damjan Marion wrote: > I tried to do that with following: > > jtag newtap $_CHIPNAME unknown0 -irlen 4 > jtag configure $_CHIPNAME.unknown0 -event setup "my_proc $_CHIPNAME.unknown0" > > but my_proc is not called, Instead I'm getting following: > > Error: JTAG scan chain interrogation failed: all ones > Error: Check JTAG interface, timings, target power, etc. > Error: Trying to use configured scan chain anyway... > Error: cc2538.unknown0: IR capture error; saw 0x0f not 0x01 > Warn : Bypassing JTAG setup events due to errors > Warn : gdb services need one or more targets defined > > Is this why you had on your mind?
Yes, what happens if you run "irscan" now from the telnet interface? -- Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software! mailto:fercer...@gmail.com ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134071&iu=/4140/ostg.clktrk _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel
