I finally managed to get it working by sending the actual firewall IP address, but this is not an acceptable solution.
Cristian Talle wrote: > I have just installed RC1 on a test box that also has Asterisk 1.4 > beta 3 installed. I have a number of SIP agents in my home office > (X-Lite, AAstra 480i, etc...) registered with OpenPBX but I can only > get outgoing audio, no matter what I do. The phones are behind a > well-behaved Linksys firewall with NAT support. All users in sip.conf > are configured with canreinvite=no and nat=yes. With the exact same > users/settings if I shut down OpenPBX and start Asterisk on the same > box (public/static IP, no firewall) everything works fine. > > Has anyone experienced the same problem? I tried setting the NAT > firewall IP address to the public IP of my router (like Adam described > in "Force openpbx to disregard IP listed in SIP REGISTER?") but > nothing changed. > _______________________________________________ Openpbx-users mailing list Openpbx-users@openpbx.org http://lists.openpbx.org/mailman/listinfo/openpbx-users