Hello community, here is the log from the commit of package kiwi for openSUSE:Factory checked in at Thu Apr 21 14:23:35 CEST 2011.
-------- --- kiwi/kiwi.changes 2011-04-15 14:28:09.000000000 +0200 +++ /mounts/work_src_done/STABLE/kiwi/kiwi.changes 2011-04-21 14:01:56.000000000 +0200 @@ -1,0 +2,87 @@ +Thu Apr 21 13:55:55 CEST 2011 - [email protected] + +- v4.87 released + +------------------------------------------------------------------- +Thu Apr 21 11:32:48 CEST 2011 - [email protected] + +- fixed initial variable setup for haveDASD|ZFCP + +------------------------------------------------------------------- +Thu Apr 21 11:09:59 CEST 2011 - [email protected] + +- changed searchBusIDBootDevice() for the s390 architecture. + All required information is now obtained from /sys/firmware/ipl + According to this no additional kernel parameters are + required to set the boot device online (bnc #689004) + +------------------------------------------------------------------- +Thu Apr 21 09:05:49 CEST 2011 - [email protected] + +- added alternative location for kiwi hooks scripts which + is FHS compliant: /lib/kiwi/hooks/ (bnc #688792) + +------------------------------------------------------------------- +Wed Apr 20 16:59:23 CEST 2011 - [email protected] + +- added URL mapping table for the opensuse:// url type. When + resolving this the regular expression based mapping table is + used to create a valid location from the specified URI data. + It's possible to extend the existing KIWIURL.txt table + according to the needs of the user or service. + +------------------------------------------------------------------- +Wed Apr 20 10:45:52 CEST 2011 - [email protected] + +- changed xsl 51 to 52 conversion. The obsolete usb image type + is removed from the XML input. this image type can be either + replaced by an iso hybrid type or by an oem type. As there is + a choice for the user the stylesheet will not make a decision + here. + +------------------------------------------------------------------- +Wed Apr 20 10:15:28 CEST 2011 - [email protected] + +- netboot: added preLoadConfiguration hook: + preLoadConfiguration: is called before the client.<MAC> is + loaded by kiwi and thus can be used to inject alternative code + for loading the client configuration. + +- netboot: added postLoadConfiguration hook: + postLoadConfiguration: is called after the client configuration + has been loaded and imported and can be used for any action + after the client configuration has exported its variables into + the boot environment + +- netboot: renamed the default register file which is put on + the pxe boot server if there is client configuration found. + kiwi now put a file called: upload/client.$DHCPCHADDR + which doesn't conflict with the files SLEPOS uses for + registration + +- netboot: removed SLEPOS related code, posbios calls and + the evaluation of the WORKSTATION_LDAP_IP variable. All + this will be part of product specific hook scripts + +------------------------------------------------------------------- +Wed Apr 20 10:14:28 CEST 2011 - [email protected] + +- allow parameters to be passed to hook scripts + +------------------------------------------------------------------- +Tue Apr 19 12:55:56 CEST 2011 - [email protected] + +- added setupBootLoaderTheme() function which is called + after the bootloader configuration has been written. The + function adapts/sets the THEME variable in the + /etc/sysconfig/bootsplash file according to the boot + theme set in the kiwi XML configuration + +------------------------------------------------------------------- +Mon Apr 18 11:08:54 CEST 2011 - [email protected] + +- fixed suseStripFirmware to match in subdirectories below + /lib/firmware/ too. firmware installed by the kernel packages + for example were removed + +------------------------------------------------------------------- calling whatdependson for head-i586 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ kiwi.spec ++++++ --- /var/tmp/diff_new_pack.VtyvQa/_old 2011-04-21 14:23:01.000000000 +0200 +++ /var/tmp/diff_new_pack.VtyvQa/_new 2011-04-21 14:23:01.000000000 +0200 @@ -65,7 +65,7 @@ %endif %endif Summary: OpenSuSE - KIWI Image System -Version: 4.86 +Version: 4.87 Release: 1 Group: System/Management License: GPLv2 ++++++ kiwi-docu.tar.bz2 ++++++ kiwi/kiwi-docu.tar.bz2 /mounts/work_src_done/STABLE/kiwi/kiwi-docu.tar.bz2 differ: char 11, line 1 ++++++ kiwi.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/.revision new/kiwi/.revision --- old/kiwi/.revision 2011-04-15 14:23:59.000000000 +0200 +++ new/kiwi/.revision 2011-04-21 13:57:55.000000000 +0200 @@ -1 +1 @@ -80f0d67a9a84dc59f34307e2f2879b1f6618d102 +dec521fd69f73299badd58ccf92098e59cfb1f71 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/kiwi.pl new/kiwi/kiwi.pl --- old/kiwi/kiwi.pl 2011-04-15 14:23:59.000000000 +0200 +++ new/kiwi/kiwi.pl 2011-04-21 13:57:55.000000000 +0200 @@ -50,11 +50,9 @@ #============================================ # Globals (Version) #-------------------------------------------- -our $Version = "4.86"; +our $Version = "4.87"; our $Publisher = "SUSE LINUX Products GmbH"; our $Preparer = "KIWI - http://kiwi.berlios.de";; -our $openSUSE = "http://download.opensuse.org";; -our @openSUSE = ("distribution","repositories"); our $ConfigFile = "$ENV{'HOME'}/.kiwirc"; our $ConfigName = "config.xml"; our $Partitioner = "parted"; @@ -105,6 +103,7 @@ our $KRegion = $BasePath."/modules/KIWIEC2Region.txt"; our $KMigraCSS= $BasePath."/modules/KIWIMigrate.tgz"; our $KSplit = $BasePath."/modules/KIWISplit.txt"; +our $repoURI = $BasePath."/modules/KIWIURL.txt"; our $Revision = $BasePath."/.revision"; our $TestBase = $BasePath."/tests"; our $SchemaCVT= $BasePath."/xsl/master.xsl"; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/modules/KIWIBoot.pm new/kiwi/modules/KIWIBoot.pm --- old/kiwi/modules/KIWIBoot.pm 2011-04-14 17:14:27.000000000 +0200 +++ new/kiwi/modules/KIWIBoot.pm 2011-04-21 12:02:24.000000000 +0200 @@ -3441,21 +3441,6 @@ print FD "$this->{mbrid}"; close FD; $kiwi -> done(); - my %ccwid; - #========================================== - # Create disk Bus-ID for online call - #------------------------------------------ - if ($main::targetDevice) { - $kiwi -> info ("Saving disk Bus-ID..."); - %ccwid = $this -> __getCCWID ($main::targetDevice); - if ((! $ccwid{busid}) && (! $ccwid{ccwid})) { - $kiwi -> failed (); - $kiwi -> error ("Can't find Bus-ID for $main::targetDevice"); - $kiwi -> failed (); - return undef; - } - $kiwi -> done(); - } #========================================== # Create zipl.conf #------------------------------------------ @@ -3528,14 +3513,7 @@ print FD "\t"."ramdisk = boot/initrd,0x2000000"."\n"; } print FD "\t"."parameters = \"loader=$bloader"; - if ($ccwid{busid}) { - print FD " busid=$ccwid{busid} $cmdline\""."\n"; - } elsif ($ccwid{ccwid}) { - print FD " ccwid=$ccwid{ccwid} wwpn=$ccwid{wwpn} lun=$ccwid{lun}"; - print FD " $cmdline\""."\n"; - } else { - print FD " $cmdline\""."\n"; - } + print FD " $cmdline\""."\n"; #========================================== # Failsafe boot #------------------------------------------ @@ -3555,14 +3533,7 @@ print FD "\t"."ramdisk = boot/initrd,0x2000000"."\n"; } print FD "\t"."parameters = \"x11failsafe loader=$bloader"; - if ($ccwid{busid}) { - print FD " busid=$ccwid{busid} $cmdline\""."\n"; - } elsif ($ccwid{ccwid}) { - print FD " ccwid=$ccwid{ccwid} wwpn=$ccwid{wwpn} lun=$ccwid{lun}"; - print FD " $cmdline\""."\n"; - } else { - print FD " $cmdline\""."\n"; - } + print FD " $cmdline\""."\n"; close FD; $kiwi -> done(); } @@ -5183,57 +5154,4 @@ return $this; } -#========================================== -# __getCCWID -#------------------------------------------ -sub __getCCWID { - # ... - # find the ccwid and wwpn + lun if a zfcp device - # is specified. The function will turn the device node - # name into a by-path name if necessary and matches - # the values from the by-path device naming convention - # for s390 DASD and ZFCP devices. The function will - # return an empty hash if no such device exists - # ---- - my $this = shift; - my $kiwi = $this->{kiwi}; - my $device = shift; - my $bypath = '\/dev\/disk\/by-path'; - my %result = (); - #========================================== - # check if device exists - #------------------------------------------ - if (! -e $device) { - $kiwi -> loginfo ("getCCWID: Device $device doesn't exist\n"); - return %result; - } - #========================================== - # turn device name into by-path name - #------------------------------------------ - if ($device !~ /$bypath\/.*/) { - my @paths = glob ("/dev/disk/by-path/*"); - foreach my $path (@paths) { - my $ndev = readlink ($path); - $ndev = "/dev/".basename $ndev; - if ($ndev eq $device) { - $device = $path; last; - } - } - } - #========================================== - # match values - #------------------------------------------ - if ($device =~ /$bypath\/ccw-([^-]+)$/) { - $result{busid}=$1; - } elsif ($device =~ /$bypath\/ccw-(.*)-zfcp-(.*):([^-]+)$/) { - $result{ccwid} = $1; - $result{wwpn} = $2; - $result{lun} = $3; - } else { - $kiwi -> loginfo ("Invalid disk device specified: $device\n"); - return %result; - } - return %result; -} - 1; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/modules/KIWIConfig.sh new/kiwi/modules/KIWIConfig.sh --- old/kiwi/modules/KIWIConfig.sh 2011-04-08 14:27:57.000000000 +0200 +++ new/kiwi/modules/KIWIConfig.sh 2011-04-21 12:02:24.000000000 +0200 @@ -1333,11 +1333,17 @@ for i in $(find $base -name "*.ko" | xargs modinfo | grep ^firmware);do IFS=$ifs name=$(echo $(echo $i | cut -f2 -d:)) - if [ -e /lib/firmware/$name ];then - bmdir=$(dirname $name) - mkdir -p /lib/firmware-required/$bmdir - mv /lib/firmware/$name /lib/firmware-required/$bmdir + if [ -z "$name" ];then + continue fi + for match in /lib/firmware/$name /lib/firmware/*/$name;do + if [ -e $match ];then + match=$(echo $match | sed -e 's@\/lib\/firmware\/@@') + bmdir=$(dirname $match) + mkdir -p /lib/firmware-required/$bmdir + mv /lib/firmware/$match /lib/firmware-required/$bmdir + fi + done done rm -rf /lib/firmware mv /lib/firmware-required /lib/firmware diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/modules/KIWILinuxRC.sh new/kiwi/modules/KIWILinuxRC.sh --- old/kiwi/modules/KIWILinuxRC.sh 2011-04-14 17:14:27.000000000 +0200 +++ new/kiwi/modules/KIWILinuxRC.sh 2011-04-21 12:02:25.000000000 +0200 @@ -32,6 +32,8 @@ #====================================== # Exports (General) #-------------------------------------- +test -z "$haveDASD" && export haveDASD=0 +test -z "$haveZFCP" && export haveZFCP=0 test -z "$ELOG_CONSOLE" && export ELOG_CONSOLE=/dev/tty3 test -z "$ELOG_BOOTSHELL" && export ELOG_BOOTSHELL=/dev/tty2 test -z "$ELOG_EXCEPTION" && export ELOG_EXCEPTION=/dev/tty1 @@ -977,6 +979,44 @@ "*** boot loader setup for $arch-$loader not implemented ***" \ "reboot" esac + setupBootLoaderTheme "/config" +} +#====================================== +# setupBootLoaderTheme +#-------------------------------------- +function setupBootLoaderTheme { + local destprefix=$1 + local srcprefix=$2 + if [ -z "$srcprefix" ];then + srcprefix=/mnt + fi + #====================================== + # no boot theme set, return + #-------------------------------------- + if [ -z "$kiwi_boottheme" ];then + return + fi + #====================================== + # prepare paths + #-------------------------------------- + local sysimg_bootsplash=$srcprefix/etc/sysconfig/bootsplash + local sysbootsplash=$destprefix/etc/sysconfig/bootsplash + mkdir -p $destprefix/etc/sysconfig + touch $sysbootsplash + #====================================== + # check for bootsplash config in sysimg + #-------------------------------------- + if [ -f $sysimg_bootsplash ];then + cp $sysimg_bootsplash $sysbootsplash + fi + #====================================== + # change/create bootsplash config + #-------------------------------------- + if cat $sysbootsplash | grep -q -E "^THEME"; then + sed -i "s/^THEME=.*/THEME=\"$kiwi_boottheme\"/" $sysbootsplash + else + echo "THEME=\"$kiwi_boottheme\"" >> $sysbootsplash + fi } #====================================== # setupBootLoaderRecovery @@ -3162,21 +3202,33 @@ # device is set online and the biosBootDevice variable # is set to this device for further processing # ---- - local haveDASD=0 - local haveZFCP=0 local deviceID=0 local dpath=/dev/disk/by-path + local ipl_type=$(cat /sys/firmware/ipl/ipl_type) + local wwpn + local slun #====================================== - # distinguish between dasd and zfcp + # determine device type: dasd or zfcp #-------------------------------------- - if [ ! -z "$ccwid" ] ;then - deviceID=$ccwid + if [ -z "$ipl_type" ];then + systemException \ + "Can't find IPL type" \ + "reboot" + fi + if [ "$ipl_type" = "fcp" ];then haveZFCP=1 - elif [ ! -z "$busid" ];then - deviceID=$busid + elif [ "$ipl_type" = "ccw" ];then haveDASD=1 + else + systemException \ + "Unknown IPL type: $ipl_type" \ + "reboot" fi #====================================== + # store device bus / host id + #-------------------------------------- + deviceID=$(cat /sys/firmware/ipl/device) + #====================================== # check if we can find the device #-------------------------------------- if [ ! -e /sys/bus/ccw/devices/$deviceID ];then @@ -3195,9 +3247,11 @@ # ZFCP #-------------------------------------- if [ $haveZFCP -eq 1 ];then + wwpn=$(cat /sys/firmware/ipl/wwpn) + slun=$(cat /sys/firmware/ipl/lun) zfcp_host_configure $deviceID 1 - zfcp_disk_configure $deviceID $wwpn $lun 1 - biosBootDevice="$dpath/ccw-$deviceID-zfcp-$wwpn:$lun" + zfcp_disk_configure $deviceID $wwpn $slun 1 + biosBootDevice="$dpath/ccw-$deviceID-zfcp-$wwpn:$slun" fi #====================================== # setup boot device variable @@ -4681,8 +4735,11 @@ #-------------------------------------- function runHook { HOOK="/kiwi-hooks/$1.sh" + if [ ! -e $HOOK ];then + HOOK="/lib/kiwi/hooks/$1.sh" + fi if [ -e $HOOK ]; then - . $HOOK + . $HOOK $@ fi } #====================================== @@ -6554,24 +6611,14 @@ function pxeSetupSystemHWTypeFile { # /.../ # collects information about the alias name the - # architecture the BIOS version and more and stores - # that into a file suffixed by the hardware address of the - # network card. Obtaining the BIOS information requires - # the posbios tool to be installed in the initrd + # architecture and more and stores that into a + # file suffixed by the hardware address of the + # network card. # ---- echo "NCNAME=$SYSALIAS" >> hwtype.$DHCPCHADDR echo "CRNAME=$SYSALIAS" >> hwtype.$DHCPCHADDR echo "IPADDR=$IPADDR" >> hwtype.$DHCPCHADDR echo "ARCHITECTURE=$ARCH" >> hwtype.$DHCPCHADDR - #======================================== - # Try to get BIOS data if tools are there - #---------------------------------------- - if [ -f /sbin/posbios ];then - HWBIOS=`/sbin/posbios -b` - echo "HWBIOS=$HWBIOS" >> hwtype.$DHCPCHADDR - HWTYPE=`/sbin/posbios -ms` - echo "HWTYPE=$HWTYPE" >> hwtype.$DHCPCHADDR - fi } #====================================== # pxeSizeToMB @@ -6963,7 +7010,7 @@ # isVirtioDevice #-------------------------------------- function isVirtioDevice { - if echo $imageDiskDevice | grep -q vda;then + if [ $haveDASD -eq 0 ] && [ $haveZFCP -eq 0 ];then return 0 fi return 1 @@ -6972,7 +7019,16 @@ # isDASDDevice #-------------------------------------- function isDASDDevice { - if echo $imageDiskDevice | grep -q dasd;then + if [ $haveDASD -eq 1 ];then + return 0 + fi + return 1 +} +#====================================== +# isZFCPDevice +#-------------------------------------- +function isZFCPDevice { + if [ $haveZFCP -eq 1 ];then return 0 fi return 1 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/modules/KIWIURL.pm new/kiwi/modules/KIWIURL.pm --- old/kiwi/modules/KIWIURL.pm 2011-04-01 14:35:59.000000000 +0200 +++ new/kiwi/modules/KIWIURL.pm 2011-04-21 12:02:25.000000000 +0200 @@ -523,12 +523,12 @@ my $this = shift; my $module = shift; my $quiet = shift; - my $browser = LWP::UserAgent->new; - my $location = $main::openSUSE; - my @dists = qw (standard); - my @urllist = (); my $kiwi = $this->{kiwi}; + my $browser = LWP::UserAgent->new; + my $uriTable = $main::repoURI; my $origurl = $module; + my %matches = (); + my $FD; #========================================== # allow proxy server from environment #------------------------------------------ @@ -546,23 +546,29 @@ return undef; } #========================================== - # Create urllist for later testing + # Create URL list from URI table #------------------------------------------ - foreach my $dist (@dists) { - foreach my $subdir (@main::openSUSE) { - my $url1 = $location."/".$subdir."/".$module."/"; - push @urllist,$url1; - if ($url1 !~ /\/$dist/) { - my $url2 = $location."/".$subdir."/".$module."/".$dist."/"; - push @urllist,$url2; - } - } + if (! open $FD, $uriTable) { + return undef; } + while (my $match =<$FD>) { + chomp $match; + my @list = split (/\|/,$match); + my $repo = $module; + my $match= '$repo =~ '.$list[1]; + eval $match; + $matches{$repo} = $list[0]; + } + close $FD; #========================================== - # Check url entries in urllist + # Check URL entries #------------------------------------------ my @responses = (); - foreach my $url (@urllist) { + foreach my $url (keys %matches) { + my $type = $matches{$url}; + if ($type ne "opensuse") { + next; + } my $response = $this -> urlResponse ( $browser,$url ); if (! $response) { next; diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/modules/KIWIURL.txt new/kiwi/modules/KIWIURL.txt --- old/kiwi/modules/KIWIURL.txt 1970-01-01 01:00:00.000000000 +0100 +++ new/kiwi/modules/KIWIURL.txt 2011-04-21 12:02:25.000000000 +0200 @@ -0,0 +1,5 @@ +opensuse|s/^/http:\/\/download.opensuse.org\// +opensuse|s/^/http:\/\/download.opensuse.org\/repositories\// +opensuse|s/^/http:\/\/download.opensuse.org\/distribution\// +opensuse|s/build.opensuse.org/http:\/\/download.opensuse.org\/distribution/ +opensuse|s/build.opensuse.org/http:\/\/download.opensuse.org\/repositories/ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/system/boot/ix86/netboot/suse-linuxrc new/kiwi/system/boot/ix86/netboot/suse-linuxrc --- old/kiwi/system/boot/ix86/netboot/suse-linuxrc 2011-04-13 18:18:10.000000000 +0200 +++ new/kiwi/system/boot/ix86/netboot/suse-linuxrc 2011-04-21 12:02:25.000000000 +0200 @@ -145,11 +145,17 @@ if [ ! -z "$NBDROOT" ];then KLIST[0]="NBDROOT=$NBDROOT"; fi + Echo "Checking for config file..." #====================================== - # Connection/access check for SERVER + # hook: preLoadConfiguration #-------------------------------------- - Echo "Checking for config file: config.$DHCPCHADDR" - fetchFile KIWI/config.$DHCPCHADDR $CONFIG + runHook preLoadConfiguration + #====================================== + # Load config.<MAC> + #-------------------------------------- + if [ ! -s $CONFIG ] ; then + fetchFile KIWI/config.$DHCPCHADDR $CONFIG + fi #====================================== # Check alternative config names #-------------------------------------- @@ -174,17 +180,6 @@ searchHardwareMapConfig IMPORTED=1 fi - #======================================== - # Compare current IP and IP from config - #---------------------------------------- - NEWIP=0 - if [ ! -z "$WORKSTATION_LDAP_IP" ]; then - WSNR=`echo $WORKSTATION_LDAP_IP | sed -r -e 's/(^|\.)0*/\1/g'` - IPNR=`echo $IPADDR | sed -r -e 's/(^|\.)0*/\1/g'` - if [ "$WSNR" != "$IPNR" ];then - NEWIP=1 - fi - fi #====================================== # No config found register new client #-------------------------------------- @@ -199,8 +194,7 @@ #====================================== # Put files on the boot server #-------------------------------------- - putFile hwtype.$DHCPCHADDR upload/hwtype.$DHCPCHADDR - putFile hwinfo.$DHCPCHADDR upload/hwinfo.$DHCPCHADDR + putFile hwtype.$DHCPCHADDR upload/client.$DHCPCHADDR echo Echo "Registered as: $DHCPCHADDR" Echo "Waiting for configuration..." @@ -227,17 +221,6 @@ done fi #====================================== - # Config found but DHCP IP setup change - #-------------------------------------- - if [ $NEWIP -eq 1 ];then - Echo "Outdated IP address, notify new client setup..." - pxeSetupSystemAliasName - pxeSetupSystemHWTypeFile - putFile hwtype.$DHCPCHADDR upload/hwtype.$DHCPCHADDR - echo - Echo "Notified: $DHCPCHADDR" - fi - #====================================== # import latest configuration #-------------------------------------- if [ $IMPORTED -eq 0 ];then @@ -256,6 +239,10 @@ eval export \"$i\" done fi + #====================================== + # hook: postLoadConfiguration + #-------------------------------------- + runHook postLoadConfiguration fi #====================================== diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/system/boot/s390/oemboot/suse-preinit new/kiwi/system/boot/s390/oemboot/suse-preinit --- old/kiwi/system/boot/s390/oemboot/suse-preinit 2011-03-11 15:36:06.000000000 +0100 +++ new/kiwi/system/boot/s390/oemboot/suse-preinit 2011-04-21 12:02:25.000000000 +0200 @@ -57,6 +57,9 @@ if isDASDDevice;then runPreinitServices dasd fi +if isZFCPDevice;then + runPreinitServices zfcp +fi #====================================== # 7) create initrd on diskful diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/system/boot/s390/vmxboot/suse-preinit new/kiwi/system/boot/s390/vmxboot/suse-preinit --- old/kiwi/system/boot/s390/vmxboot/suse-preinit 2011-04-11 17:15:55.000000000 +0200 +++ new/kiwi/system/boot/s390/vmxboot/suse-preinit 2011-04-21 12:02:25.000000000 +0200 @@ -57,6 +57,9 @@ if isDASDDevice;then runPreinitServices dasd fi +if isZFCPDevice;then + runPreinitServices zfcp +fi #====================================== # 7) create /etc/ImagePackages diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/template/s390/suse-SLE11-JeOS/root/etc/init.d/kiwi/zfcp/01-network.sh new/kiwi/template/s390/suse-SLE11-JeOS/root/etc/init.d/kiwi/zfcp/01-network.sh --- old/kiwi/template/s390/suse-SLE11-JeOS/root/etc/init.d/kiwi/zfcp/01-network.sh 1970-01-01 01:00:00.000000000 +0100 +++ new/kiwi/template/s390/suse-SLE11-JeOS/root/etc/init.d/kiwi/zfcp/01-network.sh 2011-04-21 12:02:25.000000000 +0200 @@ -0,0 +1,24 @@ +#!/bin/bash +# s390 network hardware setup +# ---- +#====================================== +# Functions... +#-------------------------------------- +. /include + +qeth_port=VSWL2 +qeth_read=0.0.0800 +qeth_write=0.0.0801 +qeth_ctrl=0.0.0802 +qeth_up=1 + +#====================================== +# Include kernel parameters +#-------------------------------------- +includeKernelParameters + +#====================================== +# Bring the device online +#-------------------------------------- +qeth_configure -p $qeth_port -l $qeth_read $qeth_write $qeth_ctrl $qeth_up + diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/kiwi/xsl/convert51to52.xsl new/kiwi/xsl/convert51to52.xsl --- old/kiwi/xsl/convert51to52.xsl 2010-12-03 16:08:52.000000000 +0100 +++ new/kiwi/xsl/convert51to52.xsl 2011-04-21 12:02:25.000000000 +0200 @@ -25,4 +25,16 @@ </image> </xsl:template> +<!-- remove obsolete usb image type --> +<xsl:template match="type" mode="conv51to52"> + <xsl:choose> + <xsl:when test="@image!='usb'"> + <type> + <xsl:copy-of select="@*"/> + <xsl:apply-templates mode="conv51to52"/> + </type> + </xsl:when> + </xsl:choose> +</xsl:template> + </xsl:stylesheet> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Remember to have fun... -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
