Hello community, here is the log from the commit of package nagios-plugins-ups_alarm for openSUSE:Factory checked in at 2013-01-25 09:36:49 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/nagios-plugins-ups_alarm (Old) and /work/SRC/openSUSE:Factory/.nagios-plugins-ups_alarm.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "nagios-plugins-ups_alarm", Maintainer is "" Changes: -------- New Changes file: --- /dev/null 2013-01-09 19:40:42.352580873 +0100 +++ /work/SRC/openSUSE:Factory/.nagios-plugins-ups_alarm.new/nagios-plugins-ups_alarm.changes 2013-01-25 09:36:50.000000000 +0100 @@ -0,0 +1,5 @@ +------------------------------------------------------------------- +Sat Dec 22 10:54:21 UTC 2012 - [email protected] + +- initial package, version 1.0 + New: ---- check_ups_alarm.pl nagios-plugins-ups_alarm.changes nagios-plugins-ups_alarm.spec no_printf.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ nagios-plugins-ups_alarm.spec ++++++ # # spec file for package nagios-plugins-ups_alarm # # Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # Name: nagios-plugins-ups_alarm Summary: Checks various properties of a Liebert NPower UPS License: GPL-2.0+ Group: System/Monitoring Version: 1.0 Release: 0 Url: http://exchange.nagios.org/directory/Plugins/Hardware/UPS/Liebert/check_ups_alarm/details Source0: check_ups_alarm.pl Patch0: no_printf.patch Requires: perl(Net::SNMP) Requires: perl(Getopt::Long) %if 0%{?suse_version} > 1010 # nagios can execute the script with embedded perl Recommends: perl %endif BuildArch: noarch BuildRequires: nagios-rpm-macros BuildRoot: %{_tmppath}/%{name}-%{version}-build %description Checks the following properties of an NPower UPS: * Battery Status - The current status of the battery * Battery Minutes Remaining - How long it can run on batteries * Battery Runtime (Seconds) - How long the UPS has been running on batteries * Battery Temperature - The temperature of the battery * Input Line Bads - The number of times the utility power has gone away * Output Load Percent - The load on the UPS * Alarm Count - Current number of alarms present %prep %setup -q -T -c %name install -m755 %{SOURCE0} . %patch0 -p0 %build # %install install -D -m755 check_ups_alarm.pl %buildroot/%{nagios_plugindir}/check_ups_alarm %clean rm -rf %buildroot %files %defattr(-,root,root) # avoid build dependecy of nagios - own the dirs %dir %{nagios_libdir} %dir %{nagios_plugindir} %{nagios_plugindir}/check_ups_alarm %changelog ++++++ check_ups_alarm.pl ++++++ #!/usr/bin/perl -wT # # check_ups_alarm.pl # # Matt Stanford # 12/03/04 - Release 1.0 # # Known to work with Liebert NPower UPSs # # Nagios Plugin designed to query SNMP on the UPS in the data center and retrun the current status # 0 alarms is OK # 1 and above is Critical (UPS shuts down at 5) # # You can use and distribute this script under terms of the GNU # GENERAL PUBLIC LICENSE Version 2 later. # use strict; use Net::SNMP; use Getopt::Long; Getopt::Long::config('auto_abbrev'); sub nagios_exit; sub show_help; sub check_action; sub get_snmp_ups; sub get_nagios_status; #################### # DEFINE VARIABLES # #################### my $snmp_host; my $snmp_community; my $snmp_version = 1; my $snmp_timeout = 5; my $snmp_port = 161; my $snmp_battery_status = "1.3.6.1.2.1.33.1.2.1.0"; my $snmp_battery_sec = "1.3.6.1.2.1.33.1.2.2.0"; my $snmp_battery_min_remain = "1.3.6.1.2.1.33.1.2.3.0"; my $snmp_battery_temp = "1.3.6.1.2.1.33.1.2.7.0"; my $snmp_input_line_bads = "1.3.6.1.2.1.33.1.3.1.0"; my $snmp_output_load_pct = "1.3.6.1.2.1.33.1.4.4.1.5.1"; my $snmp_alarm_count = "1.3.6.1.2.1.33.1.6.1.0"; my %NAGSTAT = ('UNKNOWN' => '-1', 'OK' => '0', 'WARNING' => '1', 'CRITICAL' => '2'); my @battery_status = ('?','Battery State UNKNOWN','Battery State NORMAL','Battery State LOW','Battery State DEPLETED'); my %snmp_ups = ('batteryStatus' => $snmp_battery_status, 'batterySeconds' => $snmp_battery_sec, 'batteryMinRemaining' => $snmp_battery_min_remain, 'batteryTemperature' => $snmp_battery_temp, 'inputLineBads' => $snmp_input_line_bads, 'outputLoadPercent' => $snmp_output_load_pct, 'alarmCount' => $snmp_alarm_count); my $status; my $warning; my $critical; my $action; my $nagios_message; my $current_status; my $current_oid; my $lowerwarn; my $lowercrit; #################### # DEFINE FUNCTIONS # #################### sub get_snmp_ups($){ my $OID = shift; my $session; my $error; my $response; ($session,$error) = Net::SNMP->session( Hostname => $snmp_host, Port => $snmp_port, Version => $snmp_version, Timeout => $snmp_timeout, Community => $snmp_community ); # Make sure we connected if (!defined($session)){ exit; } # Query the UPS if (!defined($response = $session->get_request($OID))){ printf STDERR $session->error(); $session->close(); nagios_exit "UNKNOWN"; } # Close the session $session->close(); return $response->{$OID}; } sub nagios_exit($){ my $a = shift; exit $NAGSTAT{"$a"}; } # P1 = Action # P2 = Current numeric status # P3 = Warning Threshold # P4 = Critical Threshold # P5 = Warning Lower Threshold # P6 = Critical Lower Threshold sub get_nagios_status($$$$;$$){ my $act = shift; my $sta = shift; my $war = shift; my $cri = shift; my $lwt = shift; my $lct = shift; my $tmp; my $nagstatus = "UNKNOWN"; if (!defined($lwt)){ $lwt = 15; } if (!defined($lct)){ $lct = 10; } if ($act eq 'batteryStatus'){ if ($sta == 2){ $nagstatus = "OK"; } elsif (($sta == 3) || ($sta == 4)){ $nagstatus = "CRITICAL"; } else { $nagstatus = "UNKNOWN"; } $nagios_message = $battery_status[$sta]; } elsif ($act eq 'batteryMinRemaining'){ if ($war < $cri){ $tmp = $war; $war = $cri; $cri = $war; } if ($sta == 65535){ $nagstatus = "OK"; } elsif ($sta > $war){ $nagstatus = "OK"; } elsif (($sta <= $war) && ($sta > $cri)){ $nagstatus = "WARNING"; } elsif ($sta <= $cri) { $nagstatus = "CRITICAL"; } else { $nagstatus = "UNKNOWN"; } $nagios_message = "UPS Status $nagstatus; $sta minutes remaining"; } elsif ($act eq 'batterySeconds'){ if ($war > $cri){ $tmp = $war; $war = $cri; $cri = $war; } if ($sta == 0){ $nagstatus = "OK"; } elsif ($sta < $war){ $nagstatus = "OK"; } elsif (($sta >= $war) && ($sta < $cri)){ $nagstatus = "WARNING"; } elsif ($sta >= $cri){ $nagstatus = "CRITICAL"; } else { $nagstatus = "UNKNOWN"; } if ($sta == 0){ $nagios_message = "UPS is on city/generator power."; } else { $nagios_message = "UPS is RUNNING. We have been on battery power for $sta seconds"; } } elsif ($act eq 'batteryTemperature'){ if ($war > $cri){ $tmp = $war; $war = $cri; $cri = $war; } if ($lwt < $lct){ $tmp = $lwt; $lwt = $lct; $lct = $lwt; } $sta = ((1.8 * $sta) + 32); if (($sta < $war) && ($sta > $lwt)){ $nagstatus = "OK"; } elsif ((($sta >= $war) && ($sta < $cri)) || (($sta <= $lwt) && ($sta > $lct))){ $nagstatus = "WARNING"; } elsif (($sta >= $cri) || ($sta <= $lct)){ $nagstatus = "CRITICAL"; } else { $nagstatus = "UNKNOWN"; } $nagios_message = "UPS Battery Temperature $nagstatus. Current Temp is $sta degrees Farenheit"; } elsif ($act eq 'inputLineBads'){ if ($war > $cri){ $tmp = $war; $war = $cri; $cri = $war; } if ($sta == 0){ $nagstatus = "OK"; } elsif ($sta < $war){ $nagstatus = "OK"; } elsif (($sta >= $war) && ($sta < $cri)){ $nagstatus = "WARNING"; } elsif ($sta >= $cri){ $nagstatus = "CRITICAL"; } else { $nagstatus = "UNKNOWN"; } $nagios_message = "UPS Input Line Bad Count is $nagstatus. The current count is $sta."; } elsif ($act eq 'outputLoadPercent'){ if ($war > $cri){ $tmp = $war; $war = $cri; $cri = $war; } if ($sta < $war){ $nagstatus = "OK"; } elsif (($sta >= $war) && ($sta < $cri)){ $nagstatus = "WARNING"; } elsif ($sta >= $cri){ $nagstatus = "CRITICAL"; } else { $nagstatus = "UNKNOWN"; } $nagios_message = "UPS Output Load is $nagstatus. The current Load is $sta\%."; } elsif ($act eq 'alarmCount'){ if ($sta == 0){ $nagstatus = "OK"; $nagios_message = "UPS Alarm count is OK, Currently there are no known alarms"; } else { $nagstatus = "CRITICAL"; $nagios_message = "UPS Alarm count is CRITICAL. Currently we have $sta alarms"; } } else { $nagstatus = "UNKNOWN"; $nagios_message = "UPS State UNKNOWN. Please check the command line syntax"; } printf "$nagios_message\n"; nagios_exit "$nagstatus"; } # Routine to check the input from the user. We need to make sure it is in the list. # If everything is ok then return then set global $action to this (we just return the value) sub check_action($){ my $a = shift; if ($a eq 'batteryStatus'){ return $a; } elsif ($a eq 'batteryMinRemaining'){ return $a; } elsif ($a eq 'batterySeconds'){ return $a; } elsif ($a eq 'batteryTemperature'){ return $a; } elsif ($a eq 'inputLineBads'){ return $a; } elsif ($a eq 'outputLoadPercent'){ return $a; } elsif ($a eq 'alarmCount'){ return $a; } else { return "ERROR"; } } sub show_help(){ printf "scriptname [options]\n"; printf " -C\tSNMP Community\n"; printf " -H\tHostname\n"; printf " -P\tSNMP Port\n"; printf " -T\tSNMP Timeout\n"; printf " -w\tWarning Threshold\n"; printf " -c\tCritical Threshold\n"; printf " -X\tType of Check (see below)\n\n"; printf "Check Types:\n"; printf " batteryStatus Current Status of the Battery [UNKNOWN,NORMAL,LOW,DEPLETED]\n"; printf " batteryMinRemaining Estimated minutes of battery life remaining (65535 means we aren't on battery power)\n"; printf " batterySeconds Number of seconds we've been on battery power (0 means we aren't on battery power)\n"; printf " batteryTemperature Current temperature (degrees Farenheit)\n"; printf " -k\tLower Warning Threshold\n"; printf " -r\tLower Critical Threshold\n"; printf " inputLineBads Counter showing how many times the input has been out of spec\n"; printf " outputLoadPercent Percentage of the current load of the Data Center compared to the capacity of the UPS\n"; printf " alarmCount Current number of alarms on the UPS\n"; printf "\nNote:\n"; printf " The Warning and Critical Thresholds should always be set UNLESS batteryStatus is selected\n"; nagios_exit "UNKNOWN"; } Getopt::Long::Configure('bundling'); $status = GetOptions ("C=s", \$snmp_community, "H=s", \$snmp_host, "P=i", \$snmp_port, "T=i", \$snmp_timeout, "X=s", \$action, "w=i", \$warning, "c=i", \$critical, "k=i", \$lowerwarn, "r=i", \$lowercrit); # We need either a Status Action or we need a warning and a critical if ((!defined($action)) && ((!defined($critical)) || (!defined($warning)))){ show_help; } elsif ((!defined($snmp_host)) || (!defined($snmp_port)) || (!defined($snmp_port))){ show_help; } if ((!defined($lowerwarn)) || (!defined($lowercrit))){ $lowerwarn = 15; $lowercrit = 10; } # Verify that what was entered as an action is legal $action = check_action "$action"; if ($action ne "ERROR"){ $current_oid = $snmp_ups{"$action"}; $current_status = get_snmp_ups "$current_oid"; } else { printf "Unknown action (-X) type!\n"; show_help; } get_nagios_status "$action", "$current_status", "$warning", "$critical", "$lowerwarn", "$lowercrit"; ++++++ no_printf.patch ++++++ Index: check_ups_alarm.pl =================================================================== --- check_ups_alarm.pl.orig +++ check_ups_alarm.pl @@ -100,7 +100,7 @@ sub get_snmp_ups($){ # Query the UPS if (!defined($response = $session->get_request($OID))){ - printf STDERR $session->error(); + print STDERR $session->error(); $session->close(); nagios_exit "UNKNOWN"; @@ -262,7 +262,7 @@ sub get_nagios_status($$$$;$$){ $nagios_message = "UPS State UNKNOWN. Please check the command line syntax"; } - printf "$nagios_message\n"; + print "$nagios_message\n"; nagios_exit "$nagstatus"; } @@ -296,26 +296,26 @@ sub check_action($){ sub show_help(){ - printf "scriptname [options]\n"; - printf " -C\tSNMP Community\n"; - printf " -H\tHostname\n"; - printf " -P\tSNMP Port\n"; - printf " -T\tSNMP Timeout\n"; - printf " -w\tWarning Threshold\n"; - printf " -c\tCritical Threshold\n"; - printf " -X\tType of Check (see below)\n\n"; - printf "Check Types:\n"; - printf " batteryStatus Current Status of the Battery [UNKNOWN,NORMAL,LOW,DEPLETED]\n"; - printf " batteryMinRemaining Estimated minutes of battery life remaining (65535 means we aren't on battery power)\n"; - printf " batterySeconds Number of seconds we've been on battery power (0 means we aren't on battery power)\n"; - printf " batteryTemperature Current temperature (degrees Farenheit)\n"; - printf " -k\tLower Warning Threshold\n"; - printf " -r\tLower Critical Threshold\n"; - printf " inputLineBads Counter showing how many times the input has been out of spec\n"; - printf " outputLoadPercent Percentage of the current load of the Data Center compared to the capacity of the UPS\n"; - printf " alarmCount Current number of alarms on the UPS\n"; - printf "\nNote:\n"; - printf " The Warning and Critical Thresholds should always be set UNLESS batteryStatus is selected\n"; + print "scriptname [options]\n"; + print " -C\tSNMP Community\n"; + print " -H\tHostname\n"; + print " -P\tSNMP Port\n"; + print " -T\tSNMP Timeout\n"; + print " -w\tWarning Threshold\n"; + print " -c\tCritical Threshold\n"; + print " -X\tType of Check (see below)\n\n"; + print "Check Types:\n"; + print " batteryStatus Current Status of the Battery [UNKNOWN,NORMAL,LOW,DEPLETED]\n"; + print " batteryMinRemaining Estimated minutes of battery life remaining (65535 means we aren't on battery power)\n"; + print " batterySeconds Number of seconds we've been on battery power (0 means we aren't on battery power)\n"; + print " batteryTemperature Current temperature (degrees Farenheit)\n"; + print " -k\tLower Warning Threshold\n"; + print " -r\tLower Critical Threshold\n"; + print " inputLineBads Counter showing how many times the input has been out of spec\n"; + print " outputLoadPercent Percentage of the current load of the Data Center compared to the capacity of the UPS\n"; + print " alarmCount Current number of alarms on the UPS\n"; + print "\nNote:\n"; + print " The Warning and Critical Thresholds should always be set UNLESS batteryStatus is selected\n"; nagios_exit "UNKNOWN"; } @@ -350,7 +350,7 @@ if ($action ne "ERROR"){ $current_oid = $snmp_ups{"$action"}; $current_status = get_snmp_ups "$current_oid"; } else { - printf "Unknown action (-X) type!\n"; + print "Unknown action (-X) type!\n"; show_help; } -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
