Hello community, here is the log from the commit of package hostapd for openSUSE:Factory checked in at 2013-04-22 14:06:25 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/hostapd (Old) and /work/SRC/openSUSE:Factory/.hostapd.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "hostapd", Maintainer is "[email protected]" Changes: -------- --- /work/SRC/openSUSE:Factory/hostapd/hostapd.changes 2012-11-08 08:04:51.000000000 +0100 +++ /work/SRC/openSUSE:Factory/.hostapd.new/hostapd.changes 2013-04-22 14:06:27.000000000 +0200 @@ -1,0 +2,23 @@ +Thu Apr 18 08:05:13 UTC 2013 - [email protected] + +- Do not package /etc/init.d +- Do not install init file since package contains a service file and + is only build for Factory +- Cleanup spec file +- Use /run instead of /var/run + +------------------------------------------------------------------- +Wed Apr 17 16:14:02 UTC 2013 - [email protected] + +- license update: GPL-2.0 or BSD-3-Clause + README makes it clear that this is a dual license - i.e. choice of either + or + +------------------------------------------------------------------- +Tue Apr 9 17:49:22 UTC 2013 - [email protected] + +- update to version 2.0 +- fix corrected file name hostapd.dif to hostapd.diff +- in default config includes all features (IEEE 802.11w, Hotspot 2.0, IEEE 802.11ac, WPS, etc.) + +------------------------------------------------------------------- Old: ---- hostapd-1.0.tar.gz hostapd.dif hostapd.init New: ---- hostapd-2.0.tar.gz hostapd.diff ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ hostapd.spec ++++++ --- /var/tmp/diff_new_pack.YjhwBy/_old 2013-04-22 14:06:32.000000000 +0200 +++ /var/tmp/diff_new_pack.YjhwBy/_new 2013-04-22 14:06:32.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package hostapd # -# Copyright (c) 2012 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,25 +17,20 @@ Name: hostapd -%if 0%{?suse_version} > 1140 BuildRequires: libnl-1_1-devel -%else -BuildRequires: libnl-devel -%endif BuildRequires: openssl-devel +BuildRequires: sqlite3-devel BuildRequires: pkgconfig(systemd) Summary: Turns Your WLAN Card into a WPA capable Access Point -License: BSD-3-Clause and GPL-2.0+ +License: GPL-2.0 or BSD-3-Clause Group: Hardware/Wifi -Version: 1.0 +Version: 2.0 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build Url: http://hostap.epitest.fi/ -PreReq: %insserv_prereq Source: http://hostap.epitest.fi/releases/hostapd-%{version}.tar.gz -Source1: hostapd.init -Source2: hostapd.service -Patch: hostapd.dif +Source1: hostapd.service +Patch0: hostapd.diff Patch1: hostapd-tmp.diff %{?systemd_requires} @@ -48,14 +43,9 @@ authentication via any ethernet driver. - -Authors: --------- - Jouni Malinen <[email protected]> - %prep -%setup -n hostapd-%{version} -%patch -p1 +%setup -q -n hostapd-%{version} +%patch0 -p1 %patch1 -p1 cd hostapd @@ -71,8 +61,7 @@ mkdir %{buildroot}/etc mkdir -p %{buildroot}/%{_mandir}/man8 install -m 755 hostapd %{buildroot}/%{_sbindir} -install -D -m 755 %{SOURCE1} %{buildroot}/etc/init.d/hostapd -ln -s /etc/init.d/hostapd %{buildroot}/%{_sbindir}/rchostapd +ln -s /usr/sbin/service %{buildroot}/%{_sbindir}/rchostapd install -m 755 hostapd_cli %{buildroot}/%{_sbindir} install -m 600 hostapd.conf %{buildroot}/etc install -m 644 hostapd.accept %{buildroot}/etc @@ -83,30 +72,23 @@ install -m 644 hostapd.vlan %{buildroot}/etc install -m 600 hostapd.wpa_psk %{buildroot}/etc install -m 644 hostapd.8 %{buildroot}/%{_mandir}/man8 -install -D -m 0644 %{SOURCE2} %{buildroot}%{_unitdir}/hostapd.service +install -D -m 0644 %{SOURCE1} %{buildroot}%{_unitdir}/hostapd.service %pre %service_add_pre hostapd.service + %post %service_add_post hostapd.service -%insserv_cleanup %preun %service_del_preun hostapd.service -%{stop_on_removal hostapd} %postun %service_del_postun hostapd.service -%{restart_on_update hostapd} -%insserv_cleanup - -%clean -rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root) -%config(noreplace) /etc/* -/etc/init.d/hostapd +%config(noreplace) /etc/hostapd.* %{_sbindir}/* %doc hostapd/ChangeLog COPYING hostapd/README hostapd/wired.conf hostapd/hostapd.conf %doc %{_mandir}/man8/* ++++++ hostapd-1.0.tar.gz -> hostapd-2.0.tar.gz ++++++ ++++ 59587 lines of diff (skipped) ++++++ hostapd-tmp.diff ++++++ --- /var/tmp/diff_new_pack.YjhwBy/_old 2013-04-22 14:06:32.000000000 +0200 +++ /var/tmp/diff_new_pack.YjhwBy/_new 2013-04-22 14:06:32.000000000 +0200 @@ -7,7 +7,7 @@ # Dump file for state information (on SIGUSR1) -dump_file=/tmp/hostapd.dump -+dump_file=/var/run/hostapd.dump ++dump_file=/run/hostapd.dump # Interface for separate control program. If this is specified, hostapd # will create this directory and a UNIX domain socket for listening to requests ++++++ hostapd.diff ++++++ --- hostapd/defconfig 2013-01-12 21:42:53.000000000 +0600 --- a/hostapd/defconfig +++ b/hostapd/defconfig @@ -30,7 +30,7 @@ #LIBS_c += -L/usr/local/lib # Driver interface for no driver (e.g., RADIUS server only) -#CONFIG_DRIVER_NONE=y +CONFIG_DRIVER_NONE=y # IEEE 802.11F/IAPP CONFIG_IAPP=y @@ -45,7 +45,7 @@ # This version is an experimental implementation based on IEEE 802.11w/D1.0 # draft and is subject to change since the standard has not yet been finalized. # Driver support is also needed for IEEE 802.11w. -#CONFIG_IEEE80211W=y +CONFIG_IEEE80211W=y # Integrated EAP server CONFIG_EAP=y @@ -69,53 +69,53 @@ CONFIG_EAP_TTLS=y # EAP-SIM for the integrated EAP server -#CONFIG_EAP_SIM=y +CONFIG_EAP_SIM=y # EAP-AKA for the integrated EAP server -#CONFIG_EAP_AKA=y +CONFIG_EAP_AKA=y # EAP-AKA' for the integrated EAP server # This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y +CONFIG_EAP_AKA_PRIME=y # EAP-PAX for the integrated EAP server -#CONFIG_EAP_PAX=y +CONFIG_EAP_PAX=y # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) -#CONFIG_EAP_PSK=y +CONFIG_EAP_PSK=y # EAP-pwd for the integrated EAP server (secure authentication with a password) -#CONFIG_EAP_PWD=y +CONFIG_EAP_PWD=y # EAP-SAKE for the integrated EAP server -#CONFIG_EAP_SAKE=y +CONFIG_EAP_SAKE=y # EAP-GPSK for the integrated EAP server -#CONFIG_EAP_GPSK=y +CONFIG_EAP_GPSK=y # Include support for optional SHA256 cipher suite in EAP-GPSK -#CONFIG_EAP_GPSK_SHA256=y +CONFIG_EAP_GPSK_SHA256=y # EAP-FAST for the integrated EAP server # Note: Default OpenSSL package does not include support for all the # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) # to add the needed functions. -#CONFIG_EAP_FAST=y +CONFIG_EAP_FAST=y # Wi-Fi Protected Setup (WPS) -#CONFIG_WPS=y +CONFIG_WPS=y # Enable WSC 2.0 support -#CONFIG_WPS2=y +CONFIG_WPS2=y # Enable UPnP support for external WPS Registrars -#CONFIG_WPS_UPNP=y +CONFIG_WPS_UPNP=y # Enable WPS support with NFC config method -#CONFIG_WPS_NFC=y +CONFIG_WPS_NFC=y # EAP-IKEv2 -#CONFIG_EAP_IKEV2=y +CONFIG_EAP_IKEV2=y # Trusted Network Connect (EAP-TNC) -#CONFIG_EAP_TNC=y +CONFIG_EAP_TNC=y # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) @@ -123,27 +123,27 @@ # RADIUS authentication server. This provides access to the integrated EAP # server from external hosts using RADIUS. -#CONFIG_RADIUS_SERVER=y +CONFIG_RADIUS_SERVER=y # Build IPv6 support for RADIUS operations CONFIG_IPV6=y # IEEE Std 802.11r-2008 (Fast BSS Transition) -#CONFIG_IEEE80211R=y +CONFIG_IEEE80211R=y # Use the hostapd's IEEE 802.11 authentication (ACL), but without # the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) -#CONFIG_DRIVER_RADIUS_ACL=y +CONFIG_DRIVER_RADIUS_ACL=y # IEEE 802.11n (High Throughput) support -#CONFIG_IEEE80211N=y +CONFIG_IEEE80211N=y # Wireless Network Management (IEEE Std 802.11v-2011) # Note: This is experimental and not complete implementation. -#CONFIG_WNM=y +CONFIG_WNM=y # IEEE 802.11ac (Very High Throughput) support -#CONFIG_IEEE80211AC=y +CONFIG_IEEE80211AC=y # Remove debugging code that is printing out debug messages to stdout. # This can be used to reduce the size of the hostapd considerably if debugging @@ -165,7 +165,7 @@ # Enable support for fully dynamic VLANs. This enables hostapd to # automatically create bridge and VLAN interfaces if necessary. -#CONFIG_FULL_DYNAMIC_VLAN=y +CONFIG_FULL_DYNAMIC_VLAN=y # Use netlink-based kernel API for VLAN operations instead of ioctl() # Note: This requires libnl 3.1 or newer. @@ -235,11 +235,11 @@ # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1) # can be enabled to get a stronger construction of messages when block ciphers # are used. -#CONFIG_TLSV11=y +CONFIG_TLSV11=y # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2) # can be enabled to enable use of stronger crypto algorithms. -#CONFIG_TLSV12=y +CONFIG_TLSV12=y # If CONFIG_TLS=internal is used, additional library and include paths are # needed for LibTomMath. Alternatively, an integrated, minimal version of @@ -260,10 +260,10 @@ # Interworking (IEEE 802.11u) # This can be used to enable functionality to improve interworking with # external networks. -#CONFIG_INTERWORKING=y +CONFIG_INTERWORKING=y # Hotspot 2.0 -#CONFIG_HS20=y +CONFIG_HS20=y # Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file -#CONFIG_SQLITE=y +CONFIG_SQLITE=y -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
