Hello community, here is the log from the commit of package u-boot for openSUSE:Factory checked in at 2013-05-07 07:38:13 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/u-boot (Old) and /work/SRC/openSUSE:Factory/.u-boot.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "u-boot" Changes: -------- New Changes file: --- /dev/null 2013-04-05 00:01:41.916011506 +0200 +++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-cubieboard.changes 2013-05-07 07:38:14.000000000 +0200 @@ -0,0 +1,241 @@ +------------------------------------------------------------------- +Wed May 1 20:48:30 UTC 2013 - [email protected] + +- add support for cubieboard, hyundaia7hd, melea1000 + +------------------------------------------------------------------- +Wed May 1 08:18:26 UTC 2013 - [email protected] + +- update to 2013.04 + * no upstream changelog available +- remove dead u-boot-raspberrypi* (actually called rpib now) +- add rpib variant + +------------------------------------------------------------------- +Thu Apr 11 17:05:58 UTC 2013 - [email protected] + +- add omap3_beagle to targets + +------------------------------------------------------------------- +Thu Apr 11 16:05:41 UTC 2013 - [email protected] + +- remove u8500href subpackage, kernel got dropped + +------------------------------------------------------------------- +Sun Apr 7 14:32:20 UTC 2013 - [email protected] + +- update to 2013.04rc2 +- enable bootz support on all boards + +------------------------------------------------------------------- +Wed Mar 20 07:21:06 UTC 2013 - [email protected] + +- fix mlo-ext2.patch to actually use the ext4 infrastructure + +------------------------------------------------------------------- +Sat Jan 26 10:38:07 UTC 2013 - [email protected] + +- update mlo-ext2.patch: + * use the ext4 driver now since ext2 got removed + +------------------------------------------------------------------- +Wed Oct 24 22:33:13 UTC 2012 - [email protected] + +- add sdhc-1.patch, sdhc-2.patch, sdhc-3.patch: + * backport upstream sdhc fixes + +------------------------------------------------------------------- +Wed Oct 24 01:37:36 CEST 2012 - [email protected] + +- update to 2012.10: + - refresh patches 0006-ARMV7-hardfp-build-fix.patch, mlo-ext2.patch, + loadaddr-defaults.patch, mx53loco-bootscr.patch + +------------------------------------------------------------------- +Mon Oct 22 12:00:22 UTC 2012 - [email protected] + +- fix origen by putting the ramdisk higher + +------------------------------------------------------------------- +Mon Aug 6 09:39:54 UTC 2012 - [email protected] + +- remove Marvell sources as they are non-free licensed (bnc#773824) + +------------------------------------------------------------------- +Thu Jul 26 18:21:44 UTC 2012 - [email protected] + +- fix ext2 support for origen +- add origen-spl.bin for origen + +------------------------------------------------------------------- +Thu Jul 26 09:47:31 UTC 2012 - [email protected] + +- merge u-boot-tools + +------------------------------------------------------------------- +Wed Jul 25 21:05:08 UTC 2012 - [email protected] + +- add ext2 support by default in mx53loco + +------------------------------------------------------------------- +Tue Jul 24 21:28:59 UTC 2012 - [email protected] + +- add support for mx53loco + +------------------------------------------------------------------- +Tue Jul 24 11:25:42 UTC 2012 - [email protected] + +- remove u-boot-omap3beagle + +------------------------------------------------------------------- +Mon Jul 23 22:34:04 UTC 2012 - [email protected] + +- bump to 2012.04.01 + - fixes bug in cmdline parsing + +------------------------------------------------------------------- +Mon Jul 23 22:26:47 UTC 2012 - [email protected] + +- add calxeda highbank support + +------------------------------------------------------------------- +Thu Jul 12 12:51:56 UTC 2012 - [email protected] + +- autoload boot.scr on beagle, so we can boot again + +------------------------------------------------------------------- +Thu Jul 12 08:12:15 UTC 2012 - [email protected] + +- update to upstream u-boot 2012.04 + -> gets rid of linaro fork, only mainline now + -> gets us omap3 MLO support, no more need for x-loader + -> potentially fixes voltage issues on omap4 + +------------------------------------------------------------------- +Thu Jun 14 09:04:53 UTC 2012 - [email protected] + +- add SUSE style conflicts to avoid installation of multiple + boot loaders + +------------------------------------------------------------------- +Tue Apr 17 11:59:55 UTC 2012 - [email protected] + +- Included u-boot.spec.in and gen_spec.sh in the spec file + +------------------------------------------------------------------- +Mon Feb 6 13:25:09 UTC 2012 - [email protected] + +- use ext2 on panda + +------------------------------------------------------------------- +Tue Dec 20 02:36:05 UTC 2011 - [email protected] + +- use ttyO2 as default console= on OMAP boards + +------------------------------------------------------------------- +Mon Dec 19 20:21:21 UTC 2011 - [email protected] + +- add u8500_href and origen configs + +------------------------------------------------------------------- +Fri Dec 16 16:03:01 UTC 2011 - [email protected] + +- fix lint failures + +------------------------------------------------------------------- +Fri Dec 16 14:46:53 CET 2011 - [email protected] + +- don't install map + +------------------------------------------------------------------- +Fri Dec 16 02:16:19 UTC 2011 - [email protected] + +- generalize spec file to be able to build for more boards +- add beagle board spec file +- remove boot.scr + +------------------------------------------------------------------- +Fri Dec 16 01:15:47 UTC 2011 - [email protected] + +- rename to u-boot-omap4panda + +------------------------------------------------------------------- +Tue Dec 13 17:24:45 UTC 2011 - [email protected] + +- new package based on u-boot-omap4panda but use linaro u-boot git + repo (http://git.linaro.org/git/boot/u-boot-linaro-stable.git) + instead of mainline u-boot. This package also contains the MLO + (this package obsoletes the x-loader package) + +------------------------------------------------------------------- +Tue Nov 29 22:53:44 UTC 2011 - [email protected] + +- COPYING CREDITS README are now in the standard package + +------------------------------------------------------------------- +Thu Nov 24 21:08:58 UTC 2011 - [email protected] + +- Corrected the links + +------------------------------------------------------------------- +Tue Nov 22 17:47:17 UTC 2011 - [email protected] + +- Build without u-boot tools as we have a u-boot-tools packages + +------------------------------------------------------------------- +Sun Nov 20 17:00:43 UTC 2011 - [email protected] + +- Cleaned the spec file up the spec file +- The name is the same as the package name + +------------------------------------------------------------------- +Sun Nov 13 13:13:39 UTC 2011 - [email protected] + +- Build u-boot according to http://elinux.org/Panda_How_to_MLO_&_u-boot +- Using .txt config file instead of .scr it's gerated via mkimage + +------------------------------------------------------------------- ++++ 44 more lines (skipped) ++++ between /dev/null ++++ and /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-cubieboard.changes --- /work/SRC/openSUSE:Factory/u-boot/u-boot-highbank.changes 2013-04-17 09:25:56.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-highbank.changes 2013-05-07 07:38:14.000000000 +0200 @@ -1,0 +2,13 @@ +Wed May 1 20:48:30 UTC 2013 - [email protected] + +- add support for cubieboard, hyundaia7hd, melea1000 + +------------------------------------------------------------------- +Wed May 1 08:18:26 UTC 2013 - [email protected] + +- update to 2013.04 + * no upstream changelog available +- remove dead u-boot-raspberrypi* (actually called rpib now) +- add rpib variant + +------------------------------------------------------------------- New Changes file: --- /dev/null 2013-04-05 00:01:41.916011506 +0200 +++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-hyundaia7hd.changes 2013-05-07 07:38:14.000000000 +0200 @@ -0,0 +1,241 @@ +------------------------------------------------------------------- +Wed May 1 20:48:30 UTC 2013 - [email protected] + +- add support for cubieboard, hyundaia7hd, melea1000 + +------------------------------------------------------------------- +Wed May 1 08:18:26 UTC 2013 - [email protected] + +- update to 2013.04 + * no upstream changelog available +- remove dead u-boot-raspberrypi* (actually called rpib now) +- add rpib variant + +------------------------------------------------------------------- +Thu Apr 11 17:05:58 UTC 2013 - [email protected] + +- add omap3_beagle to targets + +------------------------------------------------------------------- +Thu Apr 11 16:05:41 UTC 2013 - [email protected] + +- remove u8500href subpackage, kernel got dropped + +------------------------------------------------------------------- +Sun Apr 7 14:32:20 UTC 2013 - [email protected] + +- update to 2013.04rc2 +- enable bootz support on all boards + +------------------------------------------------------------------- +Wed Mar 20 07:21:06 UTC 2013 - [email protected] + +- fix mlo-ext2.patch to actually use the ext4 infrastructure + +------------------------------------------------------------------- +Sat Jan 26 10:38:07 UTC 2013 - [email protected] + +- update mlo-ext2.patch: + * use the ext4 driver now since ext2 got removed + +------------------------------------------------------------------- +Wed Oct 24 22:33:13 UTC 2012 - [email protected] + +- add sdhc-1.patch, sdhc-2.patch, sdhc-3.patch: + * backport upstream sdhc fixes + +------------------------------------------------------------------- +Wed Oct 24 01:37:36 CEST 2012 - [email protected] + +- update to 2012.10: + - refresh patches 0006-ARMV7-hardfp-build-fix.patch, mlo-ext2.patch, + loadaddr-defaults.patch, mx53loco-bootscr.patch + +------------------------------------------------------------------- +Mon Oct 22 12:00:22 UTC 2012 - [email protected] + +- fix origen by putting the ramdisk higher + +------------------------------------------------------------------- +Mon Aug 6 09:39:54 UTC 2012 - [email protected] + +- remove Marvell sources as they are non-free licensed (bnc#773824) + +------------------------------------------------------------------- +Thu Jul 26 18:21:44 UTC 2012 - [email protected] + +- fix ext2 support for origen +- add origen-spl.bin for origen + +------------------------------------------------------------------- +Thu Jul 26 09:47:31 UTC 2012 - [email protected] + +- merge u-boot-tools + +------------------------------------------------------------------- +Wed Jul 25 21:05:08 UTC 2012 - [email protected] + +- add ext2 support by default in mx53loco + +------------------------------------------------------------------- +Tue Jul 24 21:28:59 UTC 2012 - [email protected] + +- add support for mx53loco + +------------------------------------------------------------------- +Tue Jul 24 11:25:42 UTC 2012 - [email protected] + +- remove u-boot-omap3beagle + +------------------------------------------------------------------- +Mon Jul 23 22:34:04 UTC 2012 - [email protected] + +- bump to 2012.04.01 + - fixes bug in cmdline parsing + +------------------------------------------------------------------- +Mon Jul 23 22:26:47 UTC 2012 - [email protected] + +- add calxeda highbank support + +------------------------------------------------------------------- +Thu Jul 12 12:51:56 UTC 2012 - [email protected] + +- autoload boot.scr on beagle, so we can boot again + +------------------------------------------------------------------- +Thu Jul 12 08:12:15 UTC 2012 - [email protected] + +- update to upstream u-boot 2012.04 + -> gets rid of linaro fork, only mainline now + -> gets us omap3 MLO support, no more need for x-loader + -> potentially fixes voltage issues on omap4 + +------------------------------------------------------------------- +Thu Jun 14 09:04:53 UTC 2012 - [email protected] + +- add SUSE style conflicts to avoid installation of multiple + boot loaders + +------------------------------------------------------------------- +Tue Apr 17 11:59:55 UTC 2012 - [email protected] + +- Included u-boot.spec.in and gen_spec.sh in the spec file + +------------------------------------------------------------------- +Mon Feb 6 13:25:09 UTC 2012 - [email protected] + +- use ext2 on panda + +------------------------------------------------------------------- +Tue Dec 20 02:36:05 UTC 2011 - [email protected] + +- use ttyO2 as default console= on OMAP boards + +------------------------------------------------------------------- +Mon Dec 19 20:21:21 UTC 2011 - [email protected] + +- add u8500_href and origen configs + +------------------------------------------------------------------- +Fri Dec 16 16:03:01 UTC 2011 - [email protected] + +- fix lint failures + +------------------------------------------------------------------- +Fri Dec 16 14:46:53 CET 2011 - [email protected] + +- don't install map + +------------------------------------------------------------------- +Fri Dec 16 02:16:19 UTC 2011 - [email protected] + +- generalize spec file to be able to build for more boards +- add beagle board spec file +- remove boot.scr + +------------------------------------------------------------------- +Fri Dec 16 01:15:47 UTC 2011 - [email protected] + +- rename to u-boot-omap4panda + +------------------------------------------------------------------- +Tue Dec 13 17:24:45 UTC 2011 - [email protected] + +- new package based on u-boot-omap4panda but use linaro u-boot git + repo (http://git.linaro.org/git/boot/u-boot-linaro-stable.git) + instead of mainline u-boot. This package also contains the MLO + (this package obsoletes the x-loader package) + +------------------------------------------------------------------- +Tue Nov 29 22:53:44 UTC 2011 - [email protected] + +- COPYING CREDITS README are now in the standard package + +------------------------------------------------------------------- +Thu Nov 24 21:08:58 UTC 2011 - [email protected] + +- Corrected the links + +------------------------------------------------------------------- +Tue Nov 22 17:47:17 UTC 2011 - [email protected] + +- Build without u-boot tools as we have a u-boot-tools packages + +------------------------------------------------------------------- +Sun Nov 20 17:00:43 UTC 2011 - [email protected] + +- Cleaned the spec file up the spec file +- The name is the same as the package name + +------------------------------------------------------------------- +Sun Nov 13 13:13:39 UTC 2011 - [email protected] + +- Build u-boot according to http://elinux.org/Panda_How_to_MLO_&_u-boot +- Using .txt config file instead of .scr it's gerated via mkimage + +------------------------------------------------------------------- ++++ 44 more lines (skipped) ++++ between /dev/null ++++ and /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-hyundaia7hd.changes New Changes file: u-boot-melea1000.changes: same change --- /work/SRC/openSUSE:Factory/u-boot/u-boot-mx53loco.changes 2013-04-17 09:25:56.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-mx53loco.changes 2013-05-07 07:38:14.000000000 +0200 @@ -1,0 +2,13 @@ +Wed May 1 20:48:30 UTC 2013 - [email protected] + +- add support for cubieboard, hyundaia7hd, melea1000 + +------------------------------------------------------------------- +Wed May 1 08:18:26 UTC 2013 - [email protected] + +- update to 2013.04 + * no upstream changelog available +- remove dead u-boot-raspberrypi* (actually called rpib now) +- add rpib variant + +------------------------------------------------------------------- u-boot-omap3beagle.changes: same change u-boot-omap4panda.changes: same change u-boot-origen.changes: same change New Changes file: --- /dev/null 2013-04-05 00:01:41.916011506 +0200 +++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-rpib.changes 2013-05-07 07:38:14.000000000 +0200 @@ -0,0 +1,241 @@ +------------------------------------------------------------------- +Wed May 1 20:48:30 UTC 2013 - [email protected] + +- add support for cubieboard, hyundaia7hd, melea1000 + +------------------------------------------------------------------- +Wed May 1 08:18:26 UTC 2013 - [email protected] + +- update to 2013.04 + * no upstream changelog available +- remove dead u-boot-raspberrypi* (actually called rpib now) +- add rpib variant + +------------------------------------------------------------------- +Thu Apr 11 17:05:58 UTC 2013 - [email protected] + +- add omap3_beagle to targets + +------------------------------------------------------------------- +Thu Apr 11 16:05:41 UTC 2013 - [email protected] + +- remove u8500href subpackage, kernel got dropped + +------------------------------------------------------------------- +Sun Apr 7 14:32:20 UTC 2013 - [email protected] + +- update to 2013.04rc2 +- enable bootz support on all boards + +------------------------------------------------------------------- +Wed Mar 20 07:21:06 UTC 2013 - [email protected] + +- fix mlo-ext2.patch to actually use the ext4 infrastructure + +------------------------------------------------------------------- +Sat Jan 26 10:38:07 UTC 2013 - [email protected] + +- update mlo-ext2.patch: + * use the ext4 driver now since ext2 got removed + +------------------------------------------------------------------- +Wed Oct 24 22:33:13 UTC 2012 - [email protected] + +- add sdhc-1.patch, sdhc-2.patch, sdhc-3.patch: + * backport upstream sdhc fixes + +------------------------------------------------------------------- +Wed Oct 24 01:37:36 CEST 2012 - [email protected] + +- update to 2012.10: + - refresh patches 0006-ARMV7-hardfp-build-fix.patch, mlo-ext2.patch, + loadaddr-defaults.patch, mx53loco-bootscr.patch + +------------------------------------------------------------------- +Mon Oct 22 12:00:22 UTC 2012 - [email protected] + +- fix origen by putting the ramdisk higher + +------------------------------------------------------------------- +Mon Aug 6 09:39:54 UTC 2012 - [email protected] + +- remove Marvell sources as they are non-free licensed (bnc#773824) + +------------------------------------------------------------------- +Thu Jul 26 18:21:44 UTC 2012 - [email protected] + +- fix ext2 support for origen +- add origen-spl.bin for origen + +------------------------------------------------------------------- +Thu Jul 26 09:47:31 UTC 2012 - [email protected] + +- merge u-boot-tools + +------------------------------------------------------------------- +Wed Jul 25 21:05:08 UTC 2012 - [email protected] + +- add ext2 support by default in mx53loco + +------------------------------------------------------------------- +Tue Jul 24 21:28:59 UTC 2012 - [email protected] + +- add support for mx53loco + +------------------------------------------------------------------- +Tue Jul 24 11:25:42 UTC 2012 - [email protected] + +- remove u-boot-omap3beagle + +------------------------------------------------------------------- +Mon Jul 23 22:34:04 UTC 2012 - [email protected] + +- bump to 2012.04.01 + - fixes bug in cmdline parsing + +------------------------------------------------------------------- +Mon Jul 23 22:26:47 UTC 2012 - [email protected] + +- add calxeda highbank support + +------------------------------------------------------------------- +Thu Jul 12 12:51:56 UTC 2012 - [email protected] + +- autoload boot.scr on beagle, so we can boot again + +------------------------------------------------------------------- +Thu Jul 12 08:12:15 UTC 2012 - [email protected] + +- update to upstream u-boot 2012.04 + -> gets rid of linaro fork, only mainline now + -> gets us omap3 MLO support, no more need for x-loader + -> potentially fixes voltage issues on omap4 + +------------------------------------------------------------------- +Thu Jun 14 09:04:53 UTC 2012 - [email protected] + +- add SUSE style conflicts to avoid installation of multiple + boot loaders + +------------------------------------------------------------------- +Tue Apr 17 11:59:55 UTC 2012 - [email protected] + +- Included u-boot.spec.in and gen_spec.sh in the spec file + +------------------------------------------------------------------- +Mon Feb 6 13:25:09 UTC 2012 - [email protected] + +- use ext2 on panda + +------------------------------------------------------------------- +Tue Dec 20 02:36:05 UTC 2011 - [email protected] + +- use ttyO2 as default console= on OMAP boards + +------------------------------------------------------------------- +Mon Dec 19 20:21:21 UTC 2011 - [email protected] + +- add u8500_href and origen configs + +------------------------------------------------------------------- +Fri Dec 16 16:03:01 UTC 2011 - [email protected] + +- fix lint failures + +------------------------------------------------------------------- +Fri Dec 16 14:46:53 CET 2011 - [email protected] + +- don't install map + +------------------------------------------------------------------- +Fri Dec 16 02:16:19 UTC 2011 - [email protected] + +- generalize spec file to be able to build for more boards +- add beagle board spec file +- remove boot.scr + +------------------------------------------------------------------- +Fri Dec 16 01:15:47 UTC 2011 - [email protected] + +- rename to u-boot-omap4panda + +------------------------------------------------------------------- +Tue Dec 13 17:24:45 UTC 2011 - [email protected] + +- new package based on u-boot-omap4panda but use linaro u-boot git + repo (http://git.linaro.org/git/boot/u-boot-linaro-stable.git) + instead of mainline u-boot. This package also contains the MLO + (this package obsoletes the x-loader package) + +------------------------------------------------------------------- +Tue Nov 29 22:53:44 UTC 2011 - [email protected] + +- COPYING CREDITS README are now in the standard package + +------------------------------------------------------------------- +Thu Nov 24 21:08:58 UTC 2011 - [email protected] + +- Corrected the links + +------------------------------------------------------------------- +Tue Nov 22 17:47:17 UTC 2011 - [email protected] + +- Build without u-boot tools as we have a u-boot-tools packages + +------------------------------------------------------------------- +Sun Nov 20 17:00:43 UTC 2011 - [email protected] + +- Cleaned the spec file up the spec file +- The name is the same as the package name + +------------------------------------------------------------------- +Sun Nov 13 13:13:39 UTC 2011 - [email protected] + +- Build u-boot according to http://elinux.org/Panda_How_to_MLO_&_u-boot +- Using .txt config file instead of .scr it's gerated via mkimage + +------------------------------------------------------------------- ++++ 44 more lines (skipped) ++++ between /dev/null ++++ and /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-rpib.changes --- /work/SRC/openSUSE:Factory/u-boot/u-boot.changes 2013-04-17 09:25:57.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.u-boot.new/u-boot.changes 2013-05-07 07:38:15.000000000 +0200 @@ -1,0 +2,13 @@ +Wed May 1 20:48:30 UTC 2013 - [email protected] + +- add support for cubieboard, hyundaia7hd, melea1000 + +------------------------------------------------------------------- +Wed May 1 08:18:26 UTC 2013 - [email protected] + +- update to 2013.04 + * no upstream changelog available +- remove dead u-boot-raspberrypi* (actually called rpib now) +- add rpib variant + +------------------------------------------------------------------- Old: ---- u-boot-2013.04rc2.tar.bz2 u-boot-raspberrypi.changes u-boot-raspberrypi.spec New: ---- u-boot-2013.04.tar.bz2 u-boot-cubieboard.changes u-boot-cubieboard.spec u-boot-hyundaia7hd.changes u-boot-hyundaia7hd.spec u-boot-melea1000.changes u-boot-melea1000.spec u-boot-rpib.changes u-boot-rpib.spec v2013.04-sunxi.patch ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ u-boot-cubieboard.spec ++++++ # # spec file for package u-boot-cubieboard # # Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon # Copyright (c) 2007-2010 by Silvan Calarco <[email protected]> # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %define x_loader 0 %define origen_spl 0 %define sunxi_spl 1 Name: u-boot-cubieboard Version: 2013.04 Release: 0 Summary: The u-boot firmware for the cubieboard arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch Patch2: mlo-ext2.patch Patch3: loadaddr-defaults.patch Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) %if %x_loader == 1 Obsoletes: x-loader-cubieboard Provides: x-loader-cubieboard %endif ExclusiveArch: %arm %description Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains the firmware for the cubieboard arm platform. %package doc Summary: Documentation for the u-boot Firmware Group: Documentation/Other %description doc Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains documentation for u-boot firmware %prep %setup -q -n u-boot-%{version} # is non-free licensed, and we don't need it (bnc#773824) rm -rf board/Marvell # Any custom patches to be applied on top of mainline u-boot %patch1 -p1 %patch2 -p1 %patch3 -p1 %patch4 -p1 %patch5 -p1 %patch6 -p1 %patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" cubieboard_config # temporary disable of --build-id #make CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes make %{?jobs:-j %jobs} USE_PRIVATE_LIBGG=yes %install install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin %if %x_loader == 1 install -D -m 0755 MLO %{buildroot}/boot/MLO %endif %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif %if %sunxi_spl == 1 install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin %endif %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root) /boot/u-boot.bin %if %x_loader == 1 /boot/MLO %endif %if %origen_spl == 1 /boot/origen-spl.bin %endif %if %sunxi_spl == 1 /boot/sunxi-spl.bin %endif %doc COPYING CREDITS README %files doc %defattr(-,root,root) # Generic documents %doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands %doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns %doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi %doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb %doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem # Copy some useful kermit scripts as well %doc tools/scripts/dot.kermrc tools/scripts/flash_param tools/scripts/send_cmd tools/scripts/send_image # Now any h/w dependent Documentation %doc doc/README.ARM-SoC doc/README.ARM-memory-map %changelog ++++++ u-boot-highbank.spec ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -20,15 +20,16 @@ %define x_loader 0 %define origen_spl 0 +%define sunxi_spl 0 Name: u-boot-highbank -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: The u-boot firmware for the highbank arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot -Source: u-boot-%{version}.tar.bz2 +Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch @@ -37,6 +38,7 @@ Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch +Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) @@ -69,6 +71,7 @@ %patch4 -p1 %patch5 -p1 %patch6 -p1 +%patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" highbank_config @@ -84,6 +87,9 @@ %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin +%endif %clean rm -rf $RPM_BUILD_ROOT @@ -97,6 +103,9 @@ %if %origen_spl == 1 /boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +/boot/sunxi-spl.bin +%endif %doc COPYING CREDITS README %files doc ++++++ u-boot-hyundaia7hd.spec ++++++ # # spec file for package u-boot-hyundaia7hd # # Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon # Copyright (c) 2007-2010 by Silvan Calarco <[email protected]> # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %define x_loader 0 %define origen_spl 0 %define sunxi_spl 1 Name: u-boot-hyundaia7hd Version: 2013.04 Release: 0 Summary: The u-boot firmware for the hyundaia7hd arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch Patch2: mlo-ext2.patch Patch3: loadaddr-defaults.patch Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) %if %x_loader == 1 Obsoletes: x-loader-hyundaia7hd Provides: x-loader-hyundaia7hd %endif ExclusiveArch: %arm %description Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains the firmware for the hyundaia7hd arm platform. %package doc Summary: Documentation for the u-boot Firmware Group: Documentation/Other %description doc Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains documentation for u-boot firmware %prep %setup -q -n u-boot-%{version} # is non-free licensed, and we don't need it (bnc#773824) rm -rf board/Marvell # Any custom patches to be applied on top of mainline u-boot %patch1 -p1 %patch2 -p1 %patch3 -p1 %patch4 -p1 %patch5 -p1 %patch6 -p1 %patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" hyundai_a7hd_config # temporary disable of --build-id #make CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes make %{?jobs:-j %jobs} USE_PRIVATE_LIBGG=yes %install install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin %if %x_loader == 1 install -D -m 0755 MLO %{buildroot}/boot/MLO %endif %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif %if %sunxi_spl == 1 install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin %endif %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root) /boot/u-boot.bin %if %x_loader == 1 /boot/MLO %endif %if %origen_spl == 1 /boot/origen-spl.bin %endif %if %sunxi_spl == 1 /boot/sunxi-spl.bin %endif %doc COPYING CREDITS README %files doc %defattr(-,root,root) # Generic documents %doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands %doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns %doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi %doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb %doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem # Copy some useful kermit scripts as well %doc tools/scripts/dot.kermrc tools/scripts/flash_param tools/scripts/send_cmd tools/scripts/send_image # Now any h/w dependent Documentation %doc doc/README.ARM-SoC doc/README.ARM-memory-map %changelog ++++++ u-boot-melea1000.spec ++++++ # # spec file for package u-boot-melea1000 # # Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon # Copyright (c) 2007-2010 by Silvan Calarco <[email protected]> # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %define x_loader 0 %define origen_spl 0 %define sunxi_spl 1 Name: u-boot-melea1000 Version: 2013.04 Release: 0 Summary: The u-boot firmware for the melea1000 arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch Patch2: mlo-ext2.patch Patch3: loadaddr-defaults.patch Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) %if %x_loader == 1 Obsoletes: x-loader-melea1000 Provides: x-loader-melea1000 %endif ExclusiveArch: %arm %description Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains the firmware for the melea1000 arm platform. %package doc Summary: Documentation for the u-boot Firmware Group: Documentation/Other %description doc Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains documentation for u-boot firmware %prep %setup -q -n u-boot-%{version} # is non-free licensed, and we don't need it (bnc#773824) rm -rf board/Marvell # Any custom patches to be applied on top of mainline u-boot %patch1 -p1 %patch2 -p1 %patch3 -p1 %patch4 -p1 %patch5 -p1 %patch6 -p1 %patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" mele_a1000_config # temporary disable of --build-id #make CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes make %{?jobs:-j %jobs} USE_PRIVATE_LIBGG=yes %install install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin %if %x_loader == 1 install -D -m 0755 MLO %{buildroot}/boot/MLO %endif %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif %if %sunxi_spl == 1 install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin %endif %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root) /boot/u-boot.bin %if %x_loader == 1 /boot/MLO %endif %if %origen_spl == 1 /boot/origen-spl.bin %endif %if %sunxi_spl == 1 /boot/sunxi-spl.bin %endif %doc COPYING CREDITS README %files doc %defattr(-,root,root) # Generic documents %doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands %doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns %doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi %doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb %doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem # Copy some useful kermit scripts as well %doc tools/scripts/dot.kermrc tools/scripts/flash_param tools/scripts/send_cmd tools/scripts/send_image # Now any h/w dependent Documentation %doc doc/README.ARM-SoC doc/README.ARM-memory-map %changelog ++++++ u-boot-mx53loco.spec ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -20,15 +20,16 @@ %define x_loader 0 %define origen_spl 0 +%define sunxi_spl 0 Name: u-boot-mx53loco -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: The u-boot firmware for the mx53loco arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot -Source: u-boot-%{version}.tar.bz2 +Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch @@ -37,6 +38,7 @@ Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch +Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) @@ -69,6 +71,7 @@ %patch4 -p1 %patch5 -p1 %patch6 -p1 +%patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" mx53loco_config @@ -84,6 +87,9 @@ %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin +%endif %clean rm -rf $RPM_BUILD_ROOT @@ -97,6 +103,9 @@ %if %origen_spl == 1 /boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +/boot/sunxi-spl.bin +%endif %doc COPYING CREDITS README %files doc ++++++ u-boot-omap3beagle.spec ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -20,15 +20,16 @@ %define x_loader 1 %define origen_spl 0 +%define sunxi_spl 0 Name: u-boot-omap3beagle -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: The u-boot firmware for the omap3beagle arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot -Source: u-boot-%{version}.tar.bz2 +Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch @@ -37,6 +38,7 @@ Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch +Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) @@ -69,6 +71,7 @@ %patch4 -p1 %patch5 -p1 %patch6 -p1 +%patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" omap3_beagle_config @@ -84,6 +87,9 @@ %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin +%endif %clean rm -rf $RPM_BUILD_ROOT @@ -97,6 +103,9 @@ %if %origen_spl == 1 /boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +/boot/sunxi-spl.bin +%endif %doc COPYING CREDITS README %files doc ++++++ u-boot-omap4panda.spec ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -20,15 +20,16 @@ %define x_loader 1 %define origen_spl 0 +%define sunxi_spl 0 Name: u-boot-omap4panda -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: The u-boot firmware for the omap4panda arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot -Source: u-boot-%{version}.tar.bz2 +Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch @@ -37,6 +38,7 @@ Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch +Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) @@ -69,6 +71,7 @@ %patch4 -p1 %patch5 -p1 %patch6 -p1 +%patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" omap4_panda_config @@ -84,6 +87,9 @@ %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin +%endif %clean rm -rf $RPM_BUILD_ROOT @@ -97,6 +103,9 @@ %if %origen_spl == 1 /boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +/boot/sunxi-spl.bin +%endif %doc COPYING CREDITS README %files doc ++++++ u-boot-origen.spec ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -20,15 +20,16 @@ %define x_loader 0 %define origen_spl 1 +%define sunxi_spl 0 Name: u-boot-origen -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: The u-boot firmware for the origen arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot -Source: u-boot-%{version}.tar.bz2 +Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch @@ -37,6 +38,7 @@ Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch +Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) @@ -69,6 +71,7 @@ %patch4 -p1 %patch5 -p1 %patch6 -p1 +%patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" origen_config @@ -84,6 +87,9 @@ %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin +%endif %clean rm -rf $RPM_BUILD_ROOT @@ -97,6 +103,9 @@ %if %origen_spl == 1 /boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +/boot/sunxi-spl.bin +%endif %doc COPYING CREDITS README %files doc ++++++ u-boot-rpib.spec ++++++ # # spec file for package u-boot-rpib # # Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. # Copyright (c) 2010 Texas Instruments Inc by Nishanth Menon # Copyright (c) 2007-2010 by Silvan Calarco <[email protected]> # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed # upon. The license for this file, and modifications and additions to the # file, is the same license as for the pristine package itself (unless the # license for the pristine package is not an Open Source License, in which # case the license is the MIT License). An "Open Source License" is a # license that conforms to the Open Source Definition (Version 1.9) # published by the Open Source Initiative. # Please submit bugfixes or comments via http://bugs.opensuse.org/ # %define x_loader 0 %define origen_spl 0 %define sunxi_spl 0 Name: u-boot-rpib Version: 2013.04 Release: 0 Summary: The u-boot firmware for the rpib arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch Patch2: mlo-ext2.patch Patch3: loadaddr-defaults.patch Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) %if %x_loader == 1 Obsoletes: x-loader-rpib Provides: x-loader-rpib %endif ExclusiveArch: %arm %description Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains the firmware for the rpib arm platform. %package doc Summary: Documentation for the u-boot Firmware Group: Documentation/Other %description doc Das U-Boot (or just "U-Boot" for short) is Open Source Firmware for Embedded PowerPC, ARM, MIPS and x86 processors. This package contains documentation for u-boot firmware %prep %setup -q -n u-boot-%{version} # is non-free licensed, and we don't need it (bnc#773824) rm -rf board/Marvell # Any custom patches to be applied on top of mainline u-boot %patch1 -p1 %patch2 -p1 %patch3 -p1 %patch4 -p1 %patch5 -p1 %patch6 -p1 %patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" rpi_b_config # temporary disable of --build-id #make CFLAGS="$RPM_OPT_FLAGS" USE_PRIVATE_LIBGG=yes make %{?jobs:-j %jobs} USE_PRIVATE_LIBGG=yes %install install -D -m 0644 u-boot.bin %{buildroot}/boot/u-boot.bin %if %x_loader == 1 install -D -m 0755 MLO %{buildroot}/boot/MLO %endif %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif %if %sunxi_spl == 1 install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin %endif %clean rm -rf $RPM_BUILD_ROOT %files %defattr(-,root,root) /boot/u-boot.bin %if %x_loader == 1 /boot/MLO %endif %if %origen_spl == 1 /boot/origen-spl.bin %endif %if %sunxi_spl == 1 /boot/sunxi-spl.bin %endif %doc COPYING CREDITS README %files doc %defattr(-,root,root) # Generic documents %doc doc/README.JFFS2 doc/README.JFFS2_NAND doc/README.commands %doc doc/README.autoboot doc/README.commands doc/README.console doc/README.dns %doc doc/README.hwconfig doc/README.nand doc/README.NetConsole doc/README.serial_multi %doc doc/README.SNTP doc/README.standalone doc/README.update doc/README.usb %doc doc/README.video doc/README.VLAN doc/README.silent doc/README.POST doc/README.Modem # Copy some useful kermit scripts as well %doc tools/scripts/dot.kermrc tools/scripts/flash_param tools/scripts/send_cmd tools/scripts/send_image # Now any h/w dependent Documentation %doc doc/README.ARM-SoC doc/README.ARM-memory-map %changelog ++++++ u-boot.spec ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -19,7 +19,7 @@ Name: u-boot -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: Tools for the u-boot Firmware License: GPL-2.0 ++++++ loadaddr-defaults.patch ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -11,10 +11,10 @@ Signed-off-by: Alexander Graf <[email protected]> -Index: u-boot-2013.04rc2/include/configs/omap3_beagle.h +Index: u-boot-2013.04/include/configs/omap3_beagle.h =================================================================== ---- u-boot-2013.04rc2.orig/include/configs/omap3_beagle.h -+++ u-boot-2013.04rc2/include/configs/omap3_beagle.h +--- u-boot-2013.04.orig/include/configs/omap3_beagle.h ++++ u-boot-2013.04/include/configs/omap3_beagle.h @@ -218,6 +218,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x80200000\0" \ @@ -24,11 +24,11 @@ "usbtty=cdc_acm\0" \ "bootfile=uImage.beagle\0" \ "console=ttyO2,115200n8\0" \ -Index: u-boot-2013.04rc2/include/configs/omap4_common.h +Index: u-boot-2013.04/include/configs/omap4_common.h =================================================================== ---- u-boot-2013.04rc2.orig/include/configs/omap4_common.h -+++ u-boot-2013.04rc2/include/configs/omap4_common.h -@@ -144,6 +144,8 @@ +--- u-boot-2013.04.orig/include/configs/omap4_common.h ++++ u-boot-2013.04/include/configs/omap4_common.h +@@ -148,6 +148,8 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ @@ -36,4 +36,4 @@ + "ramdiskaddr=0x82000000\0" \ "console=ttyO2,115200n8\0" \ "fdt_high=0xffffffff\0" \ - "usbtty=cdc_acm\0" \ + "fdtaddr=0x80f80000\0" \ ++++++ mlo-ext2.patch ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -1,7 +1,7 @@ -Index: u-boot-2013.04rc2/drivers/mmc/spl_mmc.c +Index: u-boot-2013.04/drivers/mmc/spl_mmc.c =================================================================== ---- u-boot-2013.04rc2.orig/drivers/mmc/spl_mmc.c -+++ u-boot-2013.04rc2/drivers/mmc/spl_mmc.c +--- u-boot-2013.04.orig/drivers/mmc/spl_mmc.c ++++ u-boot-2013.04/drivers/mmc/spl_mmc.c @@ -67,6 +67,59 @@ end: } @@ -62,14 +62,7 @@ static void mmc_load_image_fat(struct mmc *mmc) { s32 err; -@@ -121,13 +174,15 @@ void spl_mmc_load_image(void) - hang(); - } - boot_mode = spl_boot_mode(); -+ boot_mode = MMCSD_MODE_FAT; - if (boot_mode == MMCSD_MODE_RAW) { - debug("boot mode - RAW\n"); - mmc_load_image_raw(mmc); +@@ -127,7 +180,8 @@ void spl_mmc_load_image(void) #ifdef CONFIG_SPL_FAT_SUPPORT } else if (boot_mode == MMCSD_MODE_FAT) { debug("boot mode - FAT\n"); @@ -79,10 +72,10 @@ #endif } else { puts("spl: wrong MMC boot mode\n"); -Index: u-boot-2013.04rc2/include/configs/omap3_beagle.h +Index: u-boot-2013.04/include/configs/omap3_beagle.h =================================================================== ---- u-boot-2013.04rc2.orig/include/configs/omap3_beagle.h -+++ u-boot-2013.04rc2/include/configs/omap3_beagle.h +--- u-boot-2013.04.orig/include/configs/omap3_beagle.h ++++ u-boot-2013.04/include/configs/omap3_beagle.h @@ -55,6 +55,7 @@ #define CONFIG_OF_LIBFDT @@ -111,10 +104,10 @@ "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ -Index: u-boot-2013.04rc2/include/configs/omap4_common.h +Index: u-boot-2013.04/include/configs/omap4_common.h =================================================================== ---- u-boot-2013.04rc2.orig/include/configs/omap4_common.h -+++ u-boot-2013.04rc2/include/configs/omap4_common.h +--- u-boot-2013.04.orig/include/configs/omap4_common.h ++++ u-boot-2013.04/include/configs/omap4_common.h @@ -126,6 +126,7 @@ #define CONFIG_CMD_FAT /* FAT support */ #define CONFIG_CMD_I2C /* I2C serial bus support */ @@ -123,7 +116,7 @@ /* Disabled commands */ #undef CONFIG_CMD_NET -@@ -154,13 +155,13 @@ +@@ -162,10 +163,10 @@ "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ @@ -135,15 +128,11 @@ + "loadbootenv=ext2load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ "importbootenv=echo Importing environment from mmc${mmcdev} ...; " \ "env import -t ${loadaddr} ${filesize}\0" \ -- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ -+ "loaduimage=ext2load mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc${mmcdev} ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ -Index: u-boot-2013.04rc2/spl/Makefile + "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ +Index: u-boot-2013.04/spl/Makefile =================================================================== ---- u-boot-2013.04rc2.orig/spl/Makefile -+++ u-boot-2013.04rc2/spl/Makefile +--- u-boot-2013.04.orig/spl/Makefile ++++ u-boot-2013.04/spl/Makefile @@ -72,6 +72,7 @@ LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += dri LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o @@ -152,3 +141,16 @@ LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o +Index: u-boot-2013.04/arch/arm/cpu/armv7/omap3/board.c +=================================================================== +--- u-boot-2013.04.orig/arch/arm/cpu/armv7/omap3/board.c ++++ u-boot-2013.04/arch/arm/cpu/armv7/omap3/board.c +@@ -77,6 +77,8 @@ u32 omap3_boot_device = BOOT_DEVICE_NAND + /* auto boot mode detection is not possible for OMAP3 - hard code */ + u32 spl_boot_mode(void) + { ++ return MMCSD_MODE_FAT; ++ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC2: + return MMCSD_MODE_RAW; ++++++ pre_checkin.sh ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -3,10 +3,8 @@ BOARDNAME="$1" BOARDCONFIG="$2" -# omap3_beagle currently needs separate sources - if [ ! "$1" -o ! "$2" ]; then - for BOARDCONFIG in omap3_beagle omap4_panda origen highbank mx53loco; do + for BOARDCONFIG in omap3_beagle omap4_panda origen highbank mx53loco rpi_b cubieboard hyundai_a7hd mele_a1000; do BOARDNAME="$(echo $BOARDCONFIG | tr -d '_')" BOARDCONFIG=${BOARDCONFIG}_config bash $0 $BOARDNAME $BOARDCONFIG @@ -16,12 +14,19 @@ XLOADER=0 ORIGEN_SPL=0 +SUNXI_SPL=0 case "$BOARDCONFIG" in mx*|efika*) BINEND=imx ;; *omap*) BINEND=bin XLOADER=1 ;; *origen*) BINEND=bin ORIGEN_SPL=1 ;; +*cubieboard*) BINEND=bin + SUNXI_SPL=1 ;; +*mele_a1000*) BINEND=bin + SUNXI_SPL=1 ;; +*hyundai_a7hd*) BINEND=bin + SUNXI_SPL=1 ;; *) BINEND=bin ;; esac @@ -29,6 +34,7 @@ s/BOARDNAME/$BOARDNAME/g s/BINEND/$BINEND/g s/ORIGEN_SPL/$ORIGEN_SPL/g +s/SUNXI_SPL/$SUNXI_SPL/g s/XLOADER/$XLOADER/g" < u-boot.spec.in > u-boot-$BOARDNAME.spec cp u-boot.changes u-boot-$BOARDNAME.changes ++++++ u-boot-2013.04rc2.tar.bz2 -> u-boot-2013.04.tar.bz2 ++++++ /work/SRC/openSUSE:Factory/u-boot/u-boot-2013.04rc2.tar.bz2 /work/SRC/openSUSE:Factory/.u-boot.new/u-boot-2013.04.tar.bz2 differ: char 11, line 1 ++++++ u-boot.spec.in ++++++ --- /var/tmp/diff_new_pack.xG2IQh/_old 2013-05-07 07:38:18.000000000 +0200 +++ /var/tmp/diff_new_pack.xG2IQh/_new 2013-05-07 07:38:18.000000000 +0200 @@ -20,15 +20,16 @@ %define x_loader XLOADER %define origen_spl ORIGEN_SPL +%define sunxi_spl SUNXI_SPL Name: u-boot-BOARDNAME -Version: 2013.04rc2 +Version: 2013.04 Release: 0 Summary: The u-boot firmware for the BOARDNAME arm platform License: GPL-2.0 Group: System/Boot Url: http://www.denx.de/wiki/U-Boot -Source: u-boot-%{version}.tar.bz2 +Source: ftp://ftp.denx.de/pub/u-boot/u-boot-%{version}.tar.bz2 Source1: openSUSE_panda.txt Source300: rpmlintrc Patch1: 0006-ARMV7-hardfp-build-fix.patch @@ -37,6 +38,7 @@ Patch4: beagle-bootscr.patch Patch5: mx53loco-bootscr.patch Patch6: exynos-ext2.patch +Patch7: v2013.04-sunxi.patch BuildRoot: %{_tmppath}/%{name}-%{version}-build Provides: u-boot-loader Conflicts: otherproviders(u-boot-loader) @@ -69,6 +71,7 @@ %patch4 -p1 %patch5 -p1 %patch6 -p1 +%patch7 %build make %{?jobs:-j %jobs} CFLAGS="$RPM_OPT_FLAGS" BOARDCONFIG @@ -84,6 +87,9 @@ %if %origen_spl == 1 install -D -m 0755 spl/origen-spl.bin %{buildroot}/boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +install -D -m 0755 spl/sunxi-spl.bin %{buildroot}/boot/sunxi-spl.bin +%endif %clean rm -rf $RPM_BUILD_ROOT @@ -97,6 +103,9 @@ %if %origen_spl == 1 /boot/origen-spl.bin %endif +%if %sunxi_spl == 1 +/boot/sunxi-spl.bin +%endif %doc COPYING CREDITS README %files doc ++++++ v2013.04-sunxi.patch ++++++ ++++ 5976 lines (skipped) -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
