Hello community,
here is the log from the commit of package evas-generic-loaders for
openSUSE:Factory checked in at 2013-08-04 07:59:03
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/evas-generic-loaders (Old)
and /work/SRC/openSUSE:Factory/.evas-generic-loaders.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "evas-generic-loaders"
Changes:
--------
---
/work/SRC/openSUSE:Factory/evas-generic-loaders/evas-generic-loaders.changes
2013-05-27 09:49:06.000000000 +0200
+++
/work/SRC/openSUSE:Factory/.evas-generic-loaders.new/evas-generic-loaders.changes
2013-08-04 07:59:05.000000000 +0200
@@ -1,0 +2,6 @@
+Sat Aug 3 09:08:26 UTC 2013 - [email protected]
+
+- bump to 1.7.7
+ No changes, increasing version to keep in sync with latest release.
+
+-------------------------------------------------------------------
Old:
----
evas_generic_loaders-1.7.7.tar.bz2
New:
----
evas_generic_loaders-1.7.8.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ evas-generic-loaders.spec ++++++
--- /var/tmp/diff_new_pack.dR70ii/_old 2013-08-04 07:59:06.000000000 +0200
+++ /var/tmp/diff_new_pack.dR70ii/_new 2013-08-04 07:59:06.000000000 +0200
@@ -17,7 +17,7 @@
Name: evas-generic-loaders
-Version: 1.7.7
+Version: 1.7.8
Release: 0
Summary: Set of generic loaders for Evas
License: GPL-2.0+
++++++ evas_generic_loaders-1.7.7.tar.bz2 -> evas_generic_loaders-1.7.8.tar.bz2
++++++
++++ 7474 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/evas_generic_loaders-1.7.7/ChangeLog
new/evas_generic_loaders-1.7.8/ChangeLog
--- old/evas_generic_loaders-1.7.7/ChangeLog 2013-04-04 22:49:46.000000000
+0200
+++ new/evas_generic_loaders-1.7.8/ChangeLog 2013-08-01 23:31:26.000000000
+0200
@@ -52,7 +52,14 @@
* 1.7.5 release
-
2013-04-04 Rafael Antognolli
* 1.7.6 release
+
+2013-05-11 Rafael Antognolli
+
+ * 1.7.7 release
+
+2013-08-02 Eduardo Lima (Etrunko)
+
+ * 1.7.8 release
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/evas_generic_loaders-1.7.7/INSTALL new/evas_generic_loaders-1.7.8/INSTALL
--- old/evas_generic_loaders-1.7.7/INSTALL 2013-04-04 23:17:12.000000000
+0200
+++ new/evas_generic_loaders-1.7.8/INSTALL 2013-07-29 16:38:05.000000000
+0200
@@ -1,7 +1,7 @@
Installation Instructions
*************************
-Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation,
Inc.
Copying and distribution of this file, with or without modification,
@@ -309,9 +309,10 @@
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
+an Autoconf limitation. Until the limitation is lifted, you can use
+this workaround:
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+ CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
@@ -367,4 +368,3 @@
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.
-
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/evas_generic_loaders-1.7.7/NEWS new/evas_generic_loaders-1.7.8/NEWS
--- old/evas_generic_loaders-1.7.7/NEWS 2013-05-11 20:23:30.000000000 +0200
+++ new/evas_generic_loaders-1.7.8/NEWS 2013-07-29 17:27:39.000000000 +0200
@@ -1,3 +1,11 @@
+Evas Generic Loaders 1.7.8
+
+Changes since Evas Generic Loaders 1.7.7:
+---------------------------
+
+No changes, just updating to keep in sync with lastest release.
+
+
Evas Generic Loaders 1.7.7
Changes since Evas Generic Loaders 1.7.6:
@@ -5,31 +13,49 @@
No changes, just updating to keep in sync with last release.
+
+Evas Generic Loaders 1.7.6
+
Changes since Evas Generic Loaders 1.7.5:
-----------------------------------------
No changes, just updating to keep in sync with last release.
+
+Evas Generic Loaders 1.7.5
+
Changes since Evas Generic Loaders 1.7.4:
-----------------------------------------
No changes, just updating to keep in sync with last release.
+
+Evas Generic Loaders 1.7.4
+
Changes since Evas Generic Loaders 1.7.3:
-----------------------------------------
No changes, just updating to keep in sync with last release.
+
+Evas Generic Loaders 1.7.3
+
Changes since Evas Generic Loaders 1.7.2:
-----------------------------------------
No changes, just updating to keep in sync with last release.
+
+Evas Generic Loaders 1.7.2
+
Changes since Evas Generic Loaders 1.7.1:
-----------------------------------------
No changes, just updating to keep in sync with last release.
+
+Evas Generic Loaders 1.7.1
+
Changes since Evas Generic Loaders 1.2.0:
-----------------------------------------
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/evas_generic_loaders-1.7.7/compile new/evas_generic_loaders-1.7.8/compile
--- old/evas_generic_loaders-1.7.7/compile 2013-04-04 23:17:11.000000000
+0200
+++ new/evas_generic_loaders-1.7.8/compile 2013-07-29 16:38:05.000000000
+0200
@@ -1,10 +1,9 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-03-05.13; # UTC
+scriptversion=2012-10-14.11; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free
-# Software Foundation, Inc.
+# Copyright (C) 1999-2013 Free Software Foundation, Inc.
# Written by Tom Tromey <[email protected]>.
#
# This program is free software; you can redistribute it and/or modify
@@ -113,6 +112,11 @@
lib=$dir/$lib.lib
break
fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
done
IFS=$save_IFS
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/evas_generic_loaders-1.7.7/configure.ac
new/evas_generic_loaders-1.7.8/configure.ac
--- old/evas_generic_loaders-1.7.7/configure.ac 2013-05-11 20:48:05.000000000
+0200
+++ new/evas_generic_loaders-1.7.8/configure.ac 2013-07-29 16:58:16.000000000
+0200
@@ -2,7 +2,7 @@
##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##--##
m4_define([v_maj], [1])
m4_define([v_min], [7])
-m4_define([v_mic], [7])
+m4_define([v_mic], [8])
m4_define([v_rev], m4_esyscmd([(svnversion "${SVN_REPO_PATH:-.}" | grep -v
export || echo 0) | awk -F : '{printf("%s\n", $1);}' | tr -d ' :MSP\n']))
m4_if(v_rev, [0], [m4_define([v_rev], m4_esyscmd([git log 2> /dev/null | (grep
-m1 git-svn-id || echo 0) | sed -e 's/.*@\([0-9]*\).*/\1/' | tr -d '\n']))])
##-- When released, remove the dnl on the below line
@@ -58,7 +58,7 @@
### Checks for libraries
# Eina library
-PKG_CHECK_MODULES(EINA, [eina >= 1.7.7])
+PKG_CHECK_MODULES(EINA, [eina >= 1.7.8])
AC_ARG_ENABLE([poppler],
[AC_HELP_STRING([--disable-poppler], [disable poppler support
@<:@default==enabled@:>@])],
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/evas_generic_loaders-1.7.7/missing new/evas_generic_loaders-1.7.8/missing
--- old/evas_generic_loaders-1.7.7/missing 2013-04-04 23:17:11.000000000
+0200
+++ new/evas_generic_loaders-1.7.8/missing 2013-07-29 16:38:05.000000000
+0200
@@ -1,11 +1,10 @@
#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
+# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-01-06.13; # UTC
+scriptversion=2012-06-26.16; # UTC
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
-# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <[email protected]>, 1996.
+# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <[email protected]>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -26,68 +25,40 @@
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
+case $1 in
-msg="missing on your system"
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
- aclocal touch file \`aclocal.m4'
- autoconf touch file \`configure'
- autoheader touch file \`config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all \`Makefile.in' files
- bison create \`y.tab.[ch]', if possible, from existing .[ch]
- flex create \`lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create \`lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
-Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
-\`g' are ignored when checking the name.
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
Send bug reports to <[email protected]>."
exit $?
@@ -99,228 +70,141 @@
;;
-*)
- echo 1>&2 "$0: Unknown \`$1' option"
- echo 1>&2 "Try \`$0 --help' for more information"
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
+# Run the given program, remember its exit status.
+"$@"; st=$?
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running `$TOOL --version' or `$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acinclude.m4' or \`${configure_ac}'. You might want
- to install the \`Automake' and \`Perl' packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`${configure_ac}'. You might want to install the
- \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`acconfig.h' or \`${configure_ac}'. You might want
- to install the \`Autoconf' and \`GNU m4' packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p'
${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
- automake*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
- You might want to install the \`Automake' and \`Perl' packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get \`$1' as part of \`Autoconf' from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: \`$1' $msg. You should only need it if
- you modified a \`.y' file. You may need the \`Bison' package
- in order for those modifications to take effect. You can get
- \`Bison' from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.l' file. You may need the \`Flex' package
- in order for those modifications to take effect. You can get
- \`Flex' from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- \`Help2man' package in order for those modifications to take
- effect. You can get \`Help2man' from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: \`$1' is $msg. You should only need it if
- you modified a \`.texi' or \`.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy \`make' (AIX,
- DU, IRIX). You might want to install the \`Texinfo' package or
- the \`GNU make' package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the \`README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing \`$1' program."
- exit 1
- ;;
-esac
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
-exit 0
+perl_URL=http://www.perl.org/
+flex_URL=http://flex.sourceforge.net/
+gnu_software_URL=http://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'automa4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
+ ;;
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
--
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
