Hello community,
here is the log from the commit of package yast2-add-on-creator for
openSUSE:Factory checked in at 2013-10-11 09:05:12
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/yast2-add-on-creator (Old)
and /work/SRC/openSUSE:Factory/.yast2-add-on-creator.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "yast2-add-on-creator"
Changes:
--------
---
/work/SRC/openSUSE:Factory/yast2-add-on-creator/yast2-add-on-creator.changes
2013-08-01 11:07:28.000000000 +0200
+++
/work/SRC/openSUSE:Factory/.yast2-add-on-creator.new/yast2-add-on-creator.changes
2013-10-11 09:05:15.000000000 +0200
@@ -1,0 +2,7 @@
+Wed Sep 18 10:03:10 UTC 2013 - [email protected]
+
+- do not use *.spec.in template, use *.spec file with RPM macros
+ instead
+- 3.1.0
+
+-------------------------------------------------------------------
Old:
----
yast2-add-on-creator-3.0.0.tar.bz2
New:
----
yast2-add-on-creator-3.1.0.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-add-on-creator.spec ++++++
--- /var/tmp/diff_new_pack.UUblr7/_old 2013-10-11 09:05:17.000000000 +0200
+++ /var/tmp/diff_new_pack.UUblr7/_new 2013-10-11 09:05:17.000000000 +0200
@@ -17,11 +17,11 @@
Name: yast2-add-on-creator
-Version: 3.0.0
+Version: 3.1.0
Release: 0
BuildRoot: %{_tmppath}/%{name}-%{version}-build
-Source0: yast2-add-on-creator-%{version}.tar.bz2
+Source0: %{name}-%{version}.tar.bz2
PreReq: %fillup_prereq
Requires: rpm-build
@@ -29,7 +29,7 @@
BuildRequires: perl-XML-Writer
BuildRequires: update-desktop-files
BuildRequires: yast2
-BuildRequires: yast2-devtools
+BuildRequires: yast2-devtools >= 3.0.6
BuildRequires: yast2-testsuite
BuildArch: noarch
@@ -44,50 +44,32 @@
A wizard for creating your own Add-On product
%prep
-%setup -n yast2-add-on-creator-%{version}
+%setup -n %{name}-%{version}
%build
-%{_prefix}/bin/y2tool y2autoconf
-%{_prefix}/bin/y2tool y2automake
-autoreconf --force --install
-
-export CFLAGS="$RPM_OPT_FLAGS -DNDEBUG"
-export CXXFLAGS="$RPM_OPT_FLAGS -DNDEBUG"
-
-./configure --libdir=%{_libdir} --prefix=%{_prefix} --mandir=%{_mandir}
-# V=1: verbose build in case we used AM_SILENT_RULES(yes)
-# so that RPM_OPT_FLAGS check works
-make %{?jobs:-j%jobs} V=1
+%yast_build
%install
-make install DESTDIR="$RPM_BUILD_ROOT"
-[ -e "%{_prefix}/share/YaST2/data/devtools/NO_MAKE_CHECK" ] ||
Y2DIR="$RPM_BUILD_ROOT/usr/share/YaST2" make check DESTDIR="$RPM_BUILD_ROOT"
-for f in `find $RPM_BUILD_ROOT/%{_prefix}/share/applications/YaST2/ -name
"*.desktop"` ; do
- d=${f##*/}
- %suse_update_desktop_file -d ycc_${d%.desktop} ${d%.desktop}
-done
-
-%clean
-rm -rf "$RPM_BUILD_ROOT"
+%yast_install
%post
%{fillup_only -n add-on-creator}
%files
%defattr(-,root,root)
-%dir /usr/share/YaST2/include/add-on-creator
-/usr/share/YaST2/include/add-on-creator/*
-/usr/share/YaST2/clients/add-on-creator*.rb
-/usr/share/YaST2/modules/AddOnCreator.*
-/usr/share/YaST2/modules/PackagesDescr.pm
-%{_prefix}/share/applications/YaST2/add-on-creator.desktop
-%dir /usr/share/YaST2/data/add-on-creator
-/usr/share/YaST2/data/add-on-creator/*
+%dir %{yast_yncludedir}/add-on-creator
+%{yast_yncludedir}/add-on-creator/*
+%{yast_clientdir}/add-on-creator*.rb
+%{yast_moduledir}/AddOnCreator.*
+%{yast_moduledir}/PackagesDescr.pm
+%{yast_desktopdir}/add-on-creator.desktop
+%dir %{yast_ydatadir}/add-on-creator
+%{yast_ydatadir}/add-on-creator/*
#agents:
-/usr/share/YaST2/scrconf/*.scr
-/usr/lib/YaST2/servers_non_y2/ag_*
-%doc %{_prefix}/share/doc/packages/yast2-add-on-creator
+%{yast_scrconfdir}/*.scr
+%{yast_agentdir}/ag_*
+%doc %{yast_docdir}
%doc COPYING
-/var/adm/fillup-templates/sysconfig.add-on-creator
+%{yast_fillupdir}/sysconfig.add-on-creator
%changelog
++++++ yast2-add-on-creator-3.0.0.tar.bz2 -> yast2-add-on-creator-3.1.0.tar.bz2
++++++
++++ 14324 lines of diff (skipped)
++++ retrying with extended exclude list
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/Makefile.am
new/yast2-add-on-creator-3.1.0/Makefile.am
--- old/yast2-add-on-creator-3.0.0/Makefile.am 2013-07-31 11:11:17.000000000
+0200
+++ new/yast2-add-on-creator-3.1.0/Makefile.am 1970-01-01 01:00:00.000000000
+0100
@@ -1,196 +0,0 @@
-# Emacs: -*- makefile -*-
-#
-# Toplevel Makefile.am for a YaST2 subproject
-#
-# -- This file is generated by y2automake - DO NOT EDIT! --
-# (Edit ./SUBDIRS instead)
-#
-
-#where devtools are
-Y2TOOL = $(Y2DEVTOOLS_PREFIX)/bin/y2tool
-
-VERSION = $(shell cat $(srcdir)/VERSION)
-RPMNAME = $(shell cat $(srcdir)/RPMNAME)
-SUBDIRS_FILE = $(shell test -e $(srcdir)/SUBDIRS && echo
SUBDIRS)
-ACINCLUDE_FILE = $(shell test -e $(srcdir)/acinclude.m4 && echo
acinclude.m4)
-
-HAS_YAST_LICENSE = $(shell test -e $(srcdir)/YAST_LICENSE && echo
YAST_LICENSE)
-
-# do we do Makefile.am for devtools? It is a little special...
-IS_DEVTOOLS = $(findstring yast2-devtools,$(RPMNAME))
-
-DEVTOOLS_DIR = $(if
$(IS_DEVTOOLS),$(srcdir)/devtools,$(Y2DEVTOOLS_PREFIX)/share/YaST2/data/devtools)
-LEGALESE_DIR = $(if
$(HAS_YAST_LICENSE),$(DEVTOOLS_DIR)/admin/copyright/yast,$(DEVTOOLS_DIR)/admin/copyright/gpl)
-
-COPYRIGHT_files_gpl = README COPYING
-
-COPYRIGHT_files_yast = YAST_LICENSE README COPYING COPYRIGHT.english \
- COPYRIGHT.french COPYRIGHT.german COPYRIGHT.spanish
-
-extra_COPYRIGHT_files = $(if $(HAS_YAST_LICENSE), $(COPYRIGHT_files_yast),
$(COPYRIGHT_files_gpl))
-
-# less strict; prefer bzip2
-AUTOMAKE_OPTIONS = foreign dist-bzip2 no-dist-gzip
-# where devtools install m4 snippets
-# argh, executed literally
-#ACLOCAL_AMFLAGS = -I $(Y2DEVTOOLS_PREFIX)/share/aclocal
-ACLOCAL_AMFLAGS = -I . -I `if test -d ./devtools/admin; then echo
./devtools/admin; else pkg-config --print-errors --variable=datadir
yast2-devtools; fi`/aclocal
-
-Makefile.am.common: $(DEVTOOLS_DIR)/admin/Makefile.am.common
- cmp -s $< $@ || cp -f $< $@
-
-# create bzip2ed tar and make some sanity checks
-$(RPMNAME)-$(VERSION).tar.bz2: checkpo dist-bzip2
- @if [ `bunzip2 -c $(RPMNAME)-$(VERSION).tar.bz2 | wc --bytes` = 0 ] ;
then \
- echo "Error: created tar is empty" ; \
- exit 1 ; \
- fi
-
-CLEANFILES =
-MAINTAINERCLEANFILES = package/$(RPMNAME)-$(VERSION).tar.bz2
package/$(RPMNAME).spec
-
-POT_DST = $(shell find -type d -name testsuite -prune , \
- -type f -name "*.pot")
-
-EXTRA_DIST = \
- VERSION RPMNAME MAINTAINER configure.in.in \
- $(SUBDIRS_FILE) $(ACINCLUDE_FILE) \
- $(if $(IS_DEVTOOLS),Makefile.am.common,$(POT_DST))
-
-show-extra-dist:
- @echo $(EXTRA_DIST)
-
-# info '(automake)Conditionals'
-if CREATE_PKGCONFIG
-# create the file here instead of by configure
-# because the prerequisite is made here (not anymore!)
-# and we don't want any paths in y2autoconf
-# info '(autoconf)config.status Invocation'
-$(RPMNAME).pc: $(RPMNAME).pc.in config.status
- ./config.status --file=$@:$<
-
-if CREATE_PKGCONFIG_NOARCH
-pkgconfigdata_DATA = $(RPMNAME).pc
-else
-pkgconfig_DATA = $(RPMNAME).pc
-endif
-
-EXTRA_DIST += $(RPMNAME).pc.in
-endif
-
-dist-hook:
- @for I in $(extra_COPYRIGHT_files) ;
\
- do
\
- EX="" ;
\
- if test -f $(srcdir)/$$I ; then
\
- EX=$(srcdir)/$$I ;
\
- elif test -f $(LEGALESE_DIR)/$$I ; then
\
- EX=$(LEGALESE_DIR)/$$I ;
\
- else
\
- echo "Error: No file $$I in $(srcdir)/ or in $$LEGALESE_DIR/";
\
- exit 1 ;
\
- fi ;
\
- echo "cp $$EX $(distdir)" ;
\
- cp $$EX "$(distdir)" ;
\
- done
-
-pot:
- $(Y2TOOL) y2makepot -s $(srcdir)
-
-install-pot: pot
- @POT_DST=`find -type d -name testsuite -prune , \
- -type f -name "*.pot"` ; \
- if [ -n "$$POT_DST" ] ; then \
- echo "mkdir -p $(DESTDIR)$(potdir)" ; \
- mkdir -p $(DESTDIR)$(potdir) ; \
- list="$$POT_DST"; \
- for I in $$list ; \
- do \
- echo $$I ; \
- if [ "$$I" == "pot" ] ; then \
- continue ; \
- fi ; \
- echo "$(INSTALL_DATA) $$I $(DESTDIR)$(potdir)" ; \
- $(INSTALL_DATA) $$I $(DESTDIR)$(potdir) ; \
- done ; \
- fi
-
-spellcheck: pot
- $(Y2TOOL) pot-spellcheck
-
-# all-local: $(if $(IS_DEVTOOLS),,$(POT_DST))
-
-install-data-local: # $(if $(IS_DEVTOOLS),,install-pot)
- mkdir -p $(DESTDIR)$(docdir)
- @for I in $(extra_COPYRIGHT_files) ;
\
- do
\
- EX="" ;
\
- if test -f $(srcdir)/$$I ; then
\
- EX=$(srcdir)/$$I ;
\
- elif test -f $(LEGALESE_DIR)/$$I ; then
\
- EX=$(LEGALESE_DIR)/$$I ;
\
- else
\
- echo "Error: No file $$I in $(srcdir)/ or in $(LEGALESE_DIR)/";
\
- exit 1 ;
\
- fi ;
\
- echo "$(INSTALL_DATA) $$EX $(DESTDIR)$(docdir)" ;
\
- $(INSTALL_DATA) $$EX $(DESTDIR)$(docdir) ;
\
- done
-
-package-local: check-parse $(if $(IS_DEVTOOLS),,$(POT_DST))
$(RPMNAME)-$(VERSION).tar.bz2
- rm -f package/$(RPMNAME)-*.tar.bz2
- rm -f package/*~
- rm -f package/*.bak
- rm -f package/*.auto
- mv $(RPMNAME)-$(VERSION).tar.bz2 package/
- if ! test -x $(Y2TOOL); then \
- echo "$(Y2TOOL): not found."; \
- echo "You have to install yast2-devtools to making a package"; \
- false; \
- fi
- here=`pwd`; \
- cd $(srcdir) && for i in $(RPMNAME)*.spec.in; do \
- newname="`echo "$$i" | sed "s/\.in$$//g"`"; \
- $(Y2TOOL) create-spec < $$i > $$here/package/$${newname} ; \
- done
-
-package: check-up-to-date check-tagversion check-textdomain package-local
-
-TAGVERSION = $(Y2TOOL) tagversion
-
-# check if there is no modified files and all commits were pushed
-check-up-to-date:
- if [ `git status --short --branch | sed '/##[^[]*$/d;/^??/d' | wc -l`
-gt 0 ]; then \
- (echo "ERROR: Source is not commited and pushed. See `git status`";
false) \
- fi
-
-check-tagversion:
- cd $(srcdir) && $(TAGVERSION) --check >/dev/null; \
- [ $$? = 0 ] || ( echo "ERROR: Please run 'tagversion' first"; false )
-
-check-parse-old:
- @if [ `find -type f -name "*.ycp" | wc -l` -gt 0 -a "$(RPMNAME)" !=
"yast2-core" ] ; then \
- echo "Running parseycp..." ; \
- parseycp -q -R ; \
- else \
- echo "Not running parseycp." ; \
- fi
-
-check-parse:
- @echo "Not running parseycp."
-
-check-textdomain:
- $(Y2TOOL) check-textdomain $(srcdir)
-
-stable: checkin-stable
-
-checkin-stable: package
- $(Y2TOOL) checkin-stable
-
-
-# For po/ modules
-checkpo:
- test ! -f $(srcdir)/po/Makefile || $(MAKE) -C po checkpo
-# test ! -f $(srcdir)/po/Makefile || $(MAKE) -C po checkpo make-pox
-# No ./SUBDIRS file found - assuming default: All direct subdirs with
Makefile.am
-SUBDIRS = agents data doc src testsuite
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/Makefile.am.common
new/yast2-add-on-creator-3.1.0/Makefile.am.common
--- old/yast2-add-on-creator-3.0.0/Makefile.am.common 2013-07-31
11:11:17.000000000 +0200
+++ new/yast2-add-on-creator-3.1.0/Makefile.am.common 1970-01-01
01:00:00.000000000 +0100
@@ -1,47 +0,0 @@
-# Makefile.am.common -*- Makefile -*-
-# Generated file, do not edit!
-
-modulebin_DATA = $(patsubst %.ycp,%.ybc,$(module_DATA))
-modulebindir = $(moduledir)
-
-ybcfiles = $(filter %.ybc,$(modulebin_DATA))
-
-# suffix mapping: info '(make)Static Usage'
-# apply only to our modules, not external ones
-${ybcfiles}: %.ybc: %.ycp $(ycpchook)
- Y2DIR=$(YCPC_Y2DIR) LD_LIBRARY_PATH=$(YCPC_LD_LIBRARY_PATH) ${YCPC} -c
-M. -I. -q $(YCPCFLAGS) $<
-
-# files to clean
-CLEANFILES = ${ybcfiles}
-DISTCLEANFILES = .dep
-
-# Needs to be outside "." because of cases
-# where ycpchook contains a symlink to "."
-# Otherwise "." keeps being newer than .dep and we loop.
-NEWDEP=${top_builddir}/.dep.new
-# generate dependencies
-# two steps not to lose the file if the command fails
-# hook: create the links before we look for files
-.dep: $(wildcard *.ycp) ${ycpchook}
- ${YCPMAKEDEP} --prefix=${prefix} ${YCPCFLAGS} > ${NEWDEP}
- cat ${NEWDEP} > .dep
- rm ${NEWDEP}
-
-dist-hook: check-syntax
-
-CHECK_SYNTAX = true
-check-syntax: $(client_DATA) $(ycpchook) $(ybcfiles)
- @if test "$(filter %.ycp,client_DATA)"; then \
- if $(CHECK_SYNTAX); then \
- TO_CHECK="$(filter %.ycp,$^)"; \
- echo "Checking syntax of $${TO_CHECK}"; \
- if ! $(YCPC) -qE -M. -I. $(YCPCFLAGS) $${TO_CHECK}; then \
- echo "Failed. Disable by 'make ... CHECK_SYNTAX=false' at your
own risk"; \
- exit 1; \
- fi; \
- else \
- echo "Syntax check disabled"; \
- fi; \
- fi
-
--include .dep
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/Makefile.cvs
new/yast2-add-on-creator-3.1.0/Makefile.cvs
--- old/yast2-add-on-creator-3.0.0/Makefile.cvs 1970-01-01 01:00:00.000000000
+0100
+++ new/yast2-add-on-creator-3.1.0/Makefile.cvs 2013-10-08 15:12:05.000000000
+0200
@@ -0,0 +1,22 @@
+#
+# Makefile.cvs
+#
+PREFIX = /usr
+
+LIB = $(shell y2tool get-lib)
+
+configure: all
+ ./configure --prefix=$(PREFIX) --libdir=$(PREFIX)/$(LIB)
+
+all:
+ y2tool y2autoconf
+ y2tool y2automake
+ autoreconf --force --install
+
+install: configure
+ make
+ make install
+
+reconf: all
+ ./config.status --recheck
+ ./config.status
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/README new/yast2-add-on-creator-3.1.0/README
--- old/yast2-add-on-creator-3.0.0/README 2013-07-31 11:11:28.000000000
+0200
+++ new/yast2-add-on-creator-3.1.0/README 1970-01-01 01:00:00.000000000
+0100
@@ -1,2 +0,0 @@
-This program/library is part of YaST2
-See the file COPYING for license terms
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/Rakefile new/yast2-add-on-creator-3.1.0/Rakefile
--- old/yast2-add-on-creator-3.0.0/Rakefile 1970-01-01 01:00:00.000000000
+0100
+++ new/yast2-add-on-creator-3.1.0/Rakefile 2013-10-08 15:12:05.000000000
+0200
@@ -0,0 +1,6 @@
+require "yast/rake"
+
+Yast::Tasks.configuration do |conf|
+ #lets ignore license check for now
+ conf.skip_license_check << /.*/
+end
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/VERSION new/yast2-add-on-creator-3.1.0/VERSION
--- old/yast2-add-on-creator-3.0.0/VERSION 2013-07-31 11:11:09.000000000
+0200
+++ new/yast2-add-on-creator-3.1.0/VERSION 2013-10-08 15:12:05.000000000
+0200
@@ -1 +1 @@
-3.0.0
+3.1.0
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/autodocs-ycp.ami
new/yast2-add-on-creator-3.1.0/autodocs-ycp.ami
--- old/yast2-add-on-creator-3.0.0/autodocs-ycp.ami 2013-07-31
11:11:17.000000000 +0200
+++ new/yast2-add-on-creator-3.1.0/autodocs-ycp.ami 1970-01-01
01:00:00.000000000 +0100
@@ -1,47 +0,0 @@
-# -*- makefile -*- Automake include file
-# $Id$
-
-# Builds source documentation for YCP sources
-# Uses ycpdoc
-# PARAMETERS:
-# AUTODOCS_YCP: Files that the ycp autodocs is built from
-# Optional - the default is $(srcdir)/../../src/*.ycp
-# AUTODOCS_PM: Files that the perl autodocs is built from
-# Optional - the default is $(srcdir)/../../src/*.pm
-# AUTODOCS_RB: Files that the ruby autodocs is built from (using yard)
-# Optional - the default is $(srcdir)/../../src/modules/*.rb)
$(srcdir)/../../src/include/*/*.rb
-# AUTODOCS_SUBDIR: To install the result to $(docdir)/SUBDIR/autodocs
-# Optional - the default is no subdir, $(docdir)/autodocs
-# AUTODOCS_STRIP: Strip it from filenames. The remaining / are replaced by __
-# Optional - the default is $(srcdir)/../../src
-
-htmldir = $(docdir)/$(AUTODOCS_SUBDIR)/autodocs
-
-# use nobase_ prefix to keep the directory structure
-nobase_html_DATA = index.html $(filter-out index.html, $(wildcard *.html))
$(wildcard js/*) $(wildcard css/*) $(wildcard Yast/*)
-CLEANFILES = $(nobase_html_DATA) pod2htm*.tmp
-
-AUTODOCS_YCP ?= $(wildcard $(srcdir)/../../src/*.ycp)
-AUTODOCS_PM ?= $(wildcard $(srcdir)/../../src/*.pm)
-AUTODOCS_RB ?= $(wildcard $(srcdir)/../../src/modules/*.rb
$(srcdir)/../../src/include/*/*.rb)
-AUTODOCS_STRIP ?= $(srcdir)/../../src
-
-# yard specific options
-YARD ?= yard
-# use markdown format by default
-YARD_OPTIONS ?= -o . -m markdown
-
-# yard specific clean
-clean-local:
- rm -rf js css Yast .yardoc
-
-
-index.html: $(AUTODOCS_YCP) $(AUTODOCS_PM) $(AUTODOCS_RB)
-#including *.pm, for the index
- if [ -n "$(AUTODOCS_YCP)" ]; then ${YCPDOC} -d. -s$(AUTODOCS_STRIP)
$(AUTODOCS_YCP); fi
- for i in $(AUTODOCS_PM); do \
- b=$${i##$(AUTODOCS_STRIP)}; b=$${b#/}; b=$${b//\//__};
b=$${b%.pm}; \
- pod2html --title=$$b --infile=$$i --outfile=$$b.html; \
- echo "<a href='$$b.html'>$${b/__/::}</a>" > $$b.mod.html; \
- done
- if [ -n "$(AUTODOCS_RB)" ]; then $(YARD) doc --title "@RPMNAME@ --
Development Documentation" $(YARD_OPTIONS) $(AUTODOCS_RB); fi
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/configure.ac
new/yast2-add-on-creator-3.1.0/configure.ac
--- old/yast2-add-on-creator-3.0.0/configure.ac 2013-07-31 11:11:16.000000000
+0200
+++ new/yast2-add-on-creator-3.1.0/configure.ac 1970-01-01 01:00:00.000000000
+0100
@@ -1,160 +0,0 @@
-dnl configure.ac for yast2-add-on-creator
-dnl
-dnl -- This file is generated by y2autoconf 2.24.7 - DO NOT EDIT! --
-dnl (edit configure.ac.in or configure.in.in instead)
-
-AC_INIT(yast2-add-on-creator, 3.0.0, http://bugs.opensuse.org/,
yast2-add-on-creator)
-dnl Check for presence of file 'RPMNAME'
-AC_CONFIG_SRCDIR([RPMNAME])
-
-dnl Checking host/target/build systems, for make, install etc.
-AC_CANONICAL_TARGET
-dnl Perform program name transformation
-AC_ARG_PROGRAM
-
-AC_PREFIX_DEFAULT(/usr)
-
-dnl long filenames; we use GNU Make extensions and that's ok
-AM_INIT_AUTOMAKE(tar-ustar -Wno-portability)
-
-dnl Important YaST2 variables
-VERSION="3.0.0"
-RPMNAME="yast2-add-on-creator"
-MAINTAINER="Jiri Suchomel <[email protected]>"
-
-dnl pkgconfig honors lib64
-pkgconfigdir=\${libdir}/pkgconfig
-pkgconfigdatadir=\${datadir}/pkgconfig
-yast2dir=\${prefix}/share/YaST2
-
-ybindir=\${prefix}/lib/YaST2/bin
-# FIXME duplicates execcompdir
-ystartupdir=\${prefix}/lib/YaST2
-plugindir=\${libdir}/YaST2/plugin
-includedir=\${prefix}/include/YaST2
-potdir=\${docdir}/pot
-
-docdir=\${prefix}/share/doc/packages/$RPMNAME
-mandir=\${prefix}/share/man
-
-execcompdir=\${prefix}/lib/YaST2
-agentdir=${execcompdir}/servers_non_y2
-
-ydatadir=${yast2dir}/data
-imagedir=${yast2dir}/images
-themedir=${yast2dir}/theme
-localedir=${yast2dir}/locale
-clientdir=${yast2dir}/clients
-moduledir=${yast2dir}/modules
-yncludedir=${yast2dir}/include
-schemadir=${yast2dir}/schema
-scrconfdir=${yast2dir}/scrconf
-desktopdir=\${prefix}/share/applications/YaST2
-
-AC_SUBST(VERSION)
-AC_SUBST(RPMNAME)
-AC_SUBST(MAINTAINER)
-
-AC_SUBST(pkgconfigdir)
-AC_SUBST(pkgconfigdatadir)
-
-AC_SUBST(yast2dir)
-
-AC_SUBST(ybindir)
-AC_SUBST(ystartupdir)
-AC_SUBST(plugindir)
-AC_SUBST(includedir)
-AC_SUBST(potdir)
-AC_SUBST(execcompdir)
-
-AC_SUBST(docdir)
-AC_SUBST(mandir)
-
-AC_SUBST(ydatadir)
-AC_SUBST(imagedir)
-AC_SUBST(themedir)
-AC_SUBST(localedir)
-AC_SUBST(clientdir)
-AC_SUBST(moduledir)
-AC_SUBST(yncludedir)
-AC_SUBST(schemadir)
-AC_SUBST(scrconfdir)
-AC_SUBST(agentdir)
-AC_SUBST(desktopdir)
-
-fillupdir_d="/var/adm/fillup-templates"
-AC_ARG_WITH(fillupdir,
- AS_HELP_STRING([--with-fillupdir=DIR],
- [where to place fillup templates (default $fillupdir_d.]),
- [ fillupdir="$withval" ],
- [ fillupdir="$fillupdir_d" ])
-AC_SUBST(fillupdir)
-
-
-
-dnl Checks for programs.
-AC_PROG_INSTALL
-dnl The YCP interpreter checks whether dependent ybc files are older
-dnl so we must preserve their timestamps
-INSTALL="${INSTALL} -p"
-AC_PROG_LN_S
-AC_PROG_MAKE_SET
-
-dnl pkgconfig
-AC_ARG_VAR([PKG_CONFIG_PATH], [where to search for pkg-config files])
-dnl devtools
-dnl ...
-
-dnl no need for AC_ARG_VAR
-AC_PATH_PROG(XGETTEXT, xgettext)
-if test -z "$XGETTEXT" ; then
- AC_MSG_ERROR(xgettext is missing; please install gettext-tools.)
-fi
-
-Y2DEVTOOLS_PREFIX=`pkg-config --print-errors --variable=prefix yast2-devtools`
-AC_SUBST(Y2DEVTOOLS_PREFIX)
-devtools_ybindir=`pkg-config --print-errors --variable=ybindir yast2-devtools`
-devtools_yast2dir=`pkg-config --print-errors --variable=yast2dir
yast2-devtools`
-
-dnl producing pkg-config for others?
-AM_CONDITIONAL(CREATE_PKGCONFIG, test "x${CREATE_PKGCONFIG}" != x)
-AM_CONDITIONAL(CREATE_PKGCONFIG_NOARCH, test "x${CREATE_PKGCONFIG}" = xnoarch)
-
-dbdir=${devtools_yast2dir}/data/docbook
-STYLESHEET_HTML=${dbdir}/stylesheets/customize-html.xsl
-STYLESHEET_PDF=${dbdir}/stylesheets/customize-fo.xsl
-STYLESHEET_CSS=${dbdir}/css/yast2docs.css
-STYLESHEET_YDOC=${dbdir}/stylesheets/ydoc.xsl
-STYLESHEET_YCPDOC=${dbdir}/stylesheets/ycpdoc.xsl
-AC_SUBST(STYLESHEET_HTML)
-AC_SUBST(STYLESHEET_PDF)
-AC_SUBST(STYLESHEET_CSS)
-AC_SUBST(STYLESHEET_YDOC)
-AC_SUBST(STYLESHEET_YCPDOC)
-
-
-AC_PATH_PROG(YCPDOC, ycpdoc, false, $PATH:$devtools_ybindir)
-if test "$YCPDOC" = "false"; then
- AC_MSG_ERROR([ycpdoc is not installed])
-fi
-AC_PATH_PROG(YCPMAKEDEP, ycpmakedep, false, $PATH:$devtools_ybindir)
-if test "$YCPMAKEDEP" = "false"; then
- AC_MSG_ERROR([ycpmakedep is not installed])
-fi
-AC_PATH_PROG(YCPC, ycpc, false, $PATH:$bindir)
-if test "$YCPC" = "false"; then
- AC_MSG_ERROR([ycpc is not installed])
-fi
-AC_CHECK_FILE($devtools_yast2dir/data/testsuite/Makefile.testsuite, [], [
- AC_MSG_WARN([yast2-testsuite.rpm is not installed])
-])
-
-
-AC_CONFIG_FILES(Makefile agents/Makefile
-data/Makefile
-doc/autodocs/Makefile
-doc/Makefile
-src/Makefile
-testsuite/Makefile)
-AC_OUTPUT
-
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/missing new/yast2-add-on-creator-3.1.0/missing
--- old/yast2-add-on-creator-3.0.0/missing 2013-07-31 11:11:21.000000000
+0200
+++ new/yast2-add-on-creator-3.1.0/missing 1970-01-01 01:00:00.000000000
+0100
@@ -1,330 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2012-01-06.18; # UTC
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <[email protected]>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, 'missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
- configure_ac=configure.ac
-else
- configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
- # Try to run requested program, and just exit if it succeeds.
- run=
- shift
- "$@" && exit 0
- # Exit code 63 means version mismatch. This often happens
- # when the user try to use an ancient version of a tool on
- # a file that requires a minimum version. In this case we
- # we should proceed has if the program had been absent, or
- # if --run hadn't been passed.
- if test $? = 63; then
- run=:
- msg="probably too old"
- fi
- ;;
-
- -h|--h|--he|--hel|--help)
- echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
- -h, --help display this help and exit
- -v, --version output version information and exit
- --run try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
- aclocal touch file 'aclocal.m4'
- autoconf touch file 'configure'
- autoheader touch file 'config.h.in'
- autom4te touch the output file, or create a stub one
- automake touch all 'Makefile.in' files
- bison create 'y.tab.[ch]', if possible, from existing .[ch]
- flex create 'lex.yy.c', if possible, from existing .c
- help2man touch the output file
- lex create 'lex.yy.c', if possible, from existing .c
- makeinfo touch the output file
- yacc create 'y.tab.[ch]', if possible, from existing .[ch]
-
-Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
-'g' are ignored when checking the name.
-
-Send bug reports to <[email protected]>."
- exit $?
- ;;
-
- -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
- echo "missing $scriptversion (GNU Automake)"
- exit $?
- ;;
-
- -*)
- echo 1>&2 "$0: Unknown '$1' option"
- echo 1>&2 "Try '$0 --help' for more information"
- exit 1
- ;;
-
-esac
-
-# normalize program name to check for.
-program=`echo "$1" | sed '
- s/^gnu-//; t
- s/^gnu//; t
- s/^g//; t'`
-
-# Now exit if we have it, but it failed. Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program). This is about non-GNU programs, so use $1 not
-# $program.
-case $1 in
- lex*|yacc*)
- # Not GNU programs, they don't have --version.
- ;;
-
- *)
- if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
- # We have it, but it failed.
- exit 1
- elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
- # Could not run --version or --help. This is probably someone
- # running '$TOOL --version' or '$TOOL --help' to check whether
- # $TOOL exists and not knowing $TOOL uses missing.
- exit 1
- fi
- ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $program in
- aclocal*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acinclude.m4' or '${configure_ac}'. You might want
- to install the Automake and Perl packages. Grab them from
- any GNU archive site."
- touch aclocal.m4
- ;;
-
- autoconf*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified '${configure_ac}'. You might want to install the
- Autoconf and GNU m4 packages. Grab them from any GNU
- archive site."
- touch configure
- ;;
-
- autoheader*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'acconfig.h' or '${configure_ac}'. You might want
- to install the Autoconf and GNU m4 packages. Grab them
- from any GNU archive site."
- files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p'
${configure_ac}`
- test -z "$files" && files="config.h"
- touch_files=
- for f in $files; do
- case $f in
- *:*) touch_files="$touch_files "`echo "$f" |
- sed -e 's/^[^:]*://' -e 's/:.*//'`;;
- *) touch_files="$touch_files $f.in";;
- esac
- done
- touch $touch_files
- ;;
-
- automake*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'.
- You might want to install the Automake and Perl packages.
- Grab them from any GNU archive site."
- find . -type f -name Makefile.am -print |
- sed 's/\.am$/.in/' |
- while read f; do touch "$f"; done
- ;;
-
- autom4te*)
- echo 1>&2 "\
-WARNING: '$1' is needed, but is $msg.
- You might have modified some files without having the
- proper tools for further handling them.
- You can get '$1' as part of Autoconf from any GNU
- archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo "#! /bin/sh"
- echo "# Created by GNU Automake missing as a replacement of"
- echo "# $ $@"
- echo "exit 0"
- chmod +x $file
- exit 1
- fi
- ;;
-
- bison*|yacc*)
- echo 1>&2 "\
-WARNING: '$1' $msg. You should only need it if
- you modified a '.y' file. You may need the Bison package
- in order for those modifications to take effect. You can get
- Bison from any GNU archive site."
- rm -f y.tab.c y.tab.h
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.y)
- SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.c
- fi
- SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" y.tab.h
- fi
- ;;
- esac
- fi
- if test ! -f y.tab.h; then
- echo >y.tab.h
- fi
- if test ! -f y.tab.c; then
- echo 'main() { return 0; }' >y.tab.c
- fi
- ;;
-
- lex*|flex*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.l' file. You may need the Flex package
- in order for those modifications to take effect. You can get
- Flex from any GNU archive site."
- rm -f lex.yy.c
- if test $# -ne 1; then
- eval LASTARG=\${$#}
- case $LASTARG in
- *.l)
- SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
- if test -f "$SRCFILE"; then
- cp "$SRCFILE" lex.yy.c
- fi
- ;;
- esac
- fi
- if test ! -f lex.yy.c; then
- echo 'main() { return 0; }' >lex.yy.c
- fi
- ;;
-
- help2man*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a dependency of a manual page. You may need the
- Help2man package in order for those modifications to take
- effect. You can get Help2man from any GNU archive site."
-
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -f "$file"; then
- touch $file
- else
- test -z "$file" || exec >$file
- echo ".ab help2man is required to generate this page"
- exit $?
- fi
- ;;
-
- makeinfo*)
- echo 1>&2 "\
-WARNING: '$1' is $msg. You should only need it if
- you modified a '.texi' or '.texinfo' file, or any other file
- indirectly affecting the aspect of the manual. The spurious
- call might also be the consequence of using a buggy 'make' (AIX,
- DU, IRIX). You might want to install the Texinfo package or
- the GNU make package. Grab either from any GNU archive site."
- # The file to touch is that specified with -o ...
- file=`echo "$*" | sed -n "$sed_output"`
- test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
- if test -z "$file"; then
- # ... or it is the one specified with @setfilename ...
- infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
- file=`sed -n '
- /^@setfilename/{
- s/.* \([^ ]*\) *$/\1/
- p
- q
- }' $infile`
- # ... or it is derived from the source name (dir/f.texi becomes f.info)
- test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
- fi
- # If the file does not exist, the user really needs makeinfo;
- # let's fail without touching anything.
- test -f $file || exit 1
- touch $file
- ;;
-
- *)
- echo 1>&2 "\
-WARNING: '$1' is needed, and is $msg.
- You might have modified some files without having the
- proper tools for further handling them. Check the 'README' file,
- it often tells you about the needed prerequisites for installing
- this package. You may also peek at any GNU archive site, in case
- some other package would contain this missing '$1' program."
- exit 1
- ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/package/yast2-add-on-creator.changes
new/yast2-add-on-creator-3.1.0/package/yast2-add-on-creator.changes
--- old/yast2-add-on-creator-3.0.0/package/yast2-add-on-creator.changes
1970-01-01 01:00:00.000000000 +0100
+++ new/yast2-add-on-creator-3.1.0/package/yast2-add-on-creator.changes
2013-10-08 15:12:05.000000000 +0200
@@ -0,0 +1,601 @@
+-------------------------------------------------------------------
+Wed Sep 18 10:03:10 UTC 2013 - [email protected]
+
+- do not use *.spec.in template, use *.spec file with RPM macros
+ instead
+- 3.1.0
+
+-------------------------------------------------------------------
+Wed Jul 31 08:25:22 UTC 2013 - [email protected]
+
+- converted from YCP to Ruby by YCP Killer
+ (https://github.com/yast/ycp-killer)
+- version 3.0.0
+
+-------------------------------------------------------------------
+Wed Jul 24 09:53:56 CEST 2013 - [email protected]
+
+- updated product names and required packages
+- 2.24.0
+
+-------------------------------------------------------------------
+Fri Dec 7 09:09:09 CET 2012 - [email protected]
+
+- some more fixes for spaces in paths (bnc#790667)
+- 2.23.0
+
+-------------------------------------------------------------------
+Thu Mar 29 13:45:12 CEST 2012 - [email protected]
+
+- merged proofread texts
+- 2.22.1
+
+-------------------------------------------------------------------
+Wed Jan 11 10:26:12 CET 2012 - [email protected]
+
+- Confirmed license
+- 2.22.0
+
+-------------------------------------------------------------------
+Wed Dec 7 10:05:46 UTC 2011 - [email protected]
+
+- fix license to be in spdx.org format
+
+-------------------------------------------------------------------
+Fri Oct 14 11:22:11 CEST 2011 - [email protected]
+
+- handle spaces in path to rpm packages (bnc#604730)
+- 2.21.2
+
+-------------------------------------------------------------------
+Mon Sep 19 09:07:28 CEST 2011 - [email protected]
+
+- remove dependency on Wizard_hw
+- 2.21.1
+
+-------------------------------------------------------------------
+Thu Sep 1 12:00:05 CEST 2011 - [email protected]
+
+- update products list (bnc#715220)
+- 2.21.0
+
+-------------------------------------------------------------------
+Tue Oct 19 10:33:41 CEST 2010 - [email protected]
+
+- do not allow spaces in NAME entry (bnc#646060)
+- 2.20.1
+
+-------------------------------------------------------------------
+Mon Aug 9 10:31:21 CEST 2010 - [email protected]
+
+- correct file name of exported keys (bnc#622569)
+- 2.20.0
+
+-------------------------------------------------------------------
+Tue Jul 27 13:48:15 CEST 2010 - [email protected]
+
+- cleanup the preparation directory for building iso image
+ (bnc#623036)
+- 2.19.2
+
+------------------------------------------------------------------
+Wed Jan 13 18:56:03 CET 2010 - [email protected]
+
+- Adjusted .desktop file(s) to wrap /sbin/yast2/ calls in xdg-su
+ where root privileges are needed, removed X-KDE-SubstituteUID key
+ (bnc#540627)
+
+-------------------------------------------------------------------
+Tue Dec 22 14:17:04 CET 2009 - [email protected]
+
+- added some path escaping
+- when generating new package descriptions, delete save entries of
+ packages with same name (bnc#486041)
+- 2.19.1
+
+-------------------------------------------------------------------
+Thu Nov 19 14:41:09 CET 2009 - [email protected]
+
+- add checksum of y2update.tgz to content file (bnc#556630)
+- 2.19.0
+
+-------------------------------------------------------------------
+Wed Oct 21 09:03:39 CEST 2009 - [email protected]
+
+- fixed importing product file (bnc#548637)
+- fixed CLI handling of y2update_packages_dir option (bnc#548637)
+- 2.18.8
+
+-------------------------------------------------------------------
+Thu Oct 1 16:46:55 CEST 2009 - [email protected]
+
+- added more error reporting popups (bnc#542088)
+- 2.18.7
+
+-------------------------------------------------------------------
+Thu Sep 3 14:16:49 CEST 2009 - [email protected]
+
+- added keywords to desktop file
+- 2.18.6
+
+-------------------------------------------------------------------
+Thu Aug 20 09:35:25 CEST 2009 - [email protected]
+
+- check for 'src' directory with input rpm packages
+- 2.18.5
+
+-------------------------------------------------------------------
+Wed Apr 15 13:48:12 CEST 2009 - [email protected]
+
+- when importing pattern, replace existing with same name and arch
+ (bnc#484762)
+- 2.18.4
+
+-------------------------------------------------------------------
+Wed Mar 25 13:18:40 CET 2009 - [email protected]
+
+- support patterns with same name but different architectures
+ (bnc#484762)
+- 2.18.3
+
+-------------------------------------------------------------------
+Mon Mar 16 14:27:06 CET 2009 - [email protected]
+
+- create new checksum of package metadata after signing packages
+ (bnc#484695)
+- 2.18.2
+
+-------------------------------------------------------------------
+Thu Mar 5 13:40:08 CET 2009 - [email protected]
+
+- fixed distribution name: OpenSUSE -> openSUSE (bnc#479737)
+- 2.18.1
+
+-------------------------------------------------------------------
+Mon Jan 19 15:52:12 CET 2009 - [email protected]
+
+- generate package metadata for -release packages (bnc#466327)
+
+-------------------------------------------------------------------
+Wed Jan 14 09:02:42 CET 2009 - [email protected]
+
+- fixed missing translation mark (bnc#464479)
+
+-------------------------------------------------------------------
+Wed Dec 17 21:21:18 CET 2008 - [email protected]
+
+- added CLI support for product file (disable generating, offer
+ path to import)
+- removed debug popup
+- enable importing product file with dependency data
+- 2.18.0
+
+-------------------------------------------------------------------
+Fri Dec 12 16:02:16 CET 2008 - [email protected]
+
+- call bs_productconvert from correct path
+- import data from -release packages when cloning product
+ (fate#305172)
+- 2.17.9
+
+-------------------------------------------------------------------
+Wed Dec 3 15:08:57 CET 2008 - [email protected]
+
+- flag is GE, not GT
+- read product requires from existing release packages
+- save only values of product_info map
+- 2.17.8
+
+-------------------------------------------------------------------
+Tue Dec 2 15:52:25 CET 2008 - [email protected]
+
+- created UI for product dependency (fate#305172)
+- write product dependency into input prod file
+- ask for media type and flavor
+- bs_productconvert produces 2 packages, take them both
+- template has only product section
+- 2.17.7
+
+-------------------------------------------------------------------
+Mon Nov 24 14:35:01 CET 2008 - [email protected]
+
+- really include the template in the package
+- read info from possible existing release package
+- call bs_productconvert to build a spec file for release package
+- build release package using rpmbuild (fate#305172)
+- 2.17.6
+
+-------------------------------------------------------------------
+Wed Oct 22 15:57:06 CEST 2008 - [email protected]
+
+- added template for .prod files
+
+-------------------------------------------------------------------
+Mon Oct 13 16:27:48 CEST 2008 - [email protected]
+
+- removed obsoleted keys from content file (fate#305172)
+- 2.17.5
+
+-------------------------------------------------------------------
+Tue Sep 9 11:06:40 CEST 2008 - [email protected]
+
+- merged proofread texts
+- removed some obsoleted content file keys
+- 2.17.4
+
+-------------------------------------------------------------------
+Tue Aug 5 12:46:55 CEST 2008 - [email protected]
+
+- recreate package metadata after signing RPMs (bnc#412591)
+- more logging during write phase
+- 2.17.3
+
+-------------------------------------------------------------------
+Mon Jul 14 09:52:18 CEST 2008 - [email protected]
+
+- read all content file values from saved configuration (bnc#406153)
+- 2.17.2
+
+-------------------------------------------------------------------
+Wed Jun 18 11:54:32 CEST 2008 - [email protected]
+
+- 2.17.1
+
+-------------------------------------------------------------------
+Tue Jun 17 09:52:15 CEST 2008 - [email protected]
+
+- ag_pattern agent - automatically compress/decompress pattern
+ file with .gz suffix
+
+-------------------------------------------------------------------
+Mon Jun 16 15:29:44 CEST 2008 - [email protected]
+
+- delete products not only after immediate exit (bnc#399964)
+- show more info about GPG keys
+- 2.17.0
+
+-------------------------------------------------------------------
+Fri May 30 11:28:43 CEST 2008 - [email protected]
+
+- CLI: read current product data after it was cleared (bnc#395753)
+- 2.16.12
+
+-------------------------------------------------------------------
+Mon May 26 13:27:02 CEST 2008 - [email protected]
+
+- enable reading pattern files with more patterns (bnc#393515)
+- create_package_descr : added option for creating file lists (-F)
+- updated list of supported pattern metadata keys
+- enable compressing packages and pattern files, added sysconfig
+ support
+- 2.16.11
+
+-------------------------------------------------------------------
+Fri May 16 16:40:22 CEST 2008 - [email protected]
+
+- added categories Settings and System into desktop file
+ (bnc #382778)
+
+-------------------------------------------------------------------
+Mon Apr 28 14:26:15 CEST 2008 - [email protected]
+
+- save list of products to $HOME if module is not called by root
+- added /etc/sysconfig/add-on-creator for storing default values
+- 2.16.10
+
+-------------------------------------------------------------------
+Fri Apr 25 10:06:08 CEST 2008 - [email protected]
+
+- fixed some widget layouts
+- allow deleting keys from package descriptions
+- 2.16.9
+
+-------------------------------------------------------------------
+Mon Apr 21 13:08:17 CEST 2008 - [email protected]
+
+- default product is openSUSE11.0
+- root not required for running
+- 2.16.8
+
+-------------------------------------------------------------------
+Mon Apr 14 14:17:41 CEST 2008 - [email protected]
+
+- added an option for generating Changelog using mk_changelog
+- 2.16.7
+
+-------------------------------------------------------------------
+Mon Apr 7 10:43:35 CEST 2008 - [email protected]
+
+- offered SLE10SP2 products as a base for new AddOn (bnc#377091)
+- fixed typo (bnc#376702)
+- 2.16.6
+
+-------------------------------------------------------------------
+Sun Mar 30 20:44:45 CEST 2008 - [email protected]
+
+- merged proofread texts
+- 2.16.5
+
+-------------------------------------------------------------------
+Mon Mar 17 12:43:32 CET 2008 - [email protected]
+
+- added 'StartupNotify=true' to the desktop file (bnc #304964)
+
+-------------------------------------------------------------------
+Wed Feb 13 16:16:08 CET 2008 - [email protected]
+
+- new summary screen with the list of already configured add-ons
+- CLI support for handling of saved configurations
+- removed add-on-creator_auto.ycp and add-on-creator_proposal.ycp
+- 2.16.4
+
+-------------------------------------------------------------------
+Tue Dec 11 10:30:10 CET 2007 - [email protected]
+
+- added suport for PATTERNS and SHORTLABEL tags in content (F302398)
+- clear some cache when going back
+- 2.16.3
+
+-------------------------------------------------------------------
+Fri Dec 7 15:48:37 CET 2007 - [email protected]
+
+- offer current openSUSE version as required product (#335813)
+- 2.16.2
+
+-------------------------------------------------------------------
+Mon Oct 29 15:04:37 CET 2007 - [email protected]
+
+- gpg needs --batch parameter to run non-interactively (#336680)
+- ask for reentering password when gpg fails (#297168)
+- 2.16.1
+
+-------------------------------------------------------------------
+Mon Oct 1 11:23:59 CEST 2007 - [email protected]
+
+- create patterns with correct key ordering (#328816)
+- after pattern import, show also keys without value (#329738)
+- remember patter import path (#329731)
+- 2.16.0
+
+-------------------------------------------------------------------
+Fri Sep 14 08:39:09 CEST 2007 - [email protected]
+
+- enable deleting of pattern keys (#297195)
+- enable reading compressed metadata files
+- 2.15.21
+
+-------------------------------------------------------------------
+Thu Aug 23 14:34:17 CEST 2007 - [email protected]
+
+- copy packages with different architectures to correct
+ directories (#302439)
+- reset the settings after returning to the first step (#302407)
+- 2.15.20
+
+-------------------------------------------------------------------
+Fri Aug 10 12:47:53 CEST 2007 - [email protected]
+
+- licenses written to /license.tar.gz (F302018)
+- enable adding EXTRA_PROV file
+- CLI option for info.txt and EXTRA_PROV
+- SHA1 sums of EXTRA_PROV, info.txt, license.tar.gz to content
+- 2.15.19
+
+-------------------------------------------------------------------
+Tue Aug 7 11:22:00 CEST 2007 - [email protected]
+
+- licenses of packages merged into EULA.txt (F302018)
+- 2.15.18
+
+-------------------------------------------------------------------
+Mon Aug 6 14:07:47 CEST 2007 - [email protected]
+
+- enable entering product name and version before content file
+ dialog, so most of its mandatory keys can be filled
+- 2.15.17
+
+-------------------------------------------------------------------
+Mon Aug 6 10:05:35 CEST 2007 - [email protected]
+
+- command line option for packages resigning (#287447)
+- 2.15.16
+
+-------------------------------------------------------------------
+Fri Aug 3 15:24:36 CEST 2007 - [email protected]
+
+- do not require rpms for creating AddOn (#297165)
+- password verification entry (#297168)
+- new PackagesDescr.pm module instead of ag_packages_descr
+ (Perl agent cannot handle large amount of data on input)
+- during copying packages, copy whole directories to prevent too
+ long line with bash command
+- 2.15.15
+
+-------------------------------------------------------------------
+Thu Aug 2 14:42:45 CEST 2007 - [email protected]
+
+- tag for suggested packages in pattern is Psg, not Prs
+- licenses saved in /media.1/license directory and not compressed,
+ license.txt duplicated as EULA.txt (F302018)
+- added button for importing package license text
+- 2.15.14
+
+-------------------------------------------------------------------
+Tue Jul 31 11:37:23 CEST 2007 - [email protected]
+
+- offered SLE10SP1 products as a base for new AddOn
+
+-------------------------------------------------------------------
+Thu Jun 14 14:15:55 CEST 2007 - [email protected]
+
+- enable resigning of the packages (#287447)
+
+-------------------------------------------------------------------
+Thu Jun 14 14:15:55 CEST 2007 - [email protected]
+
+- checkbox for marking pattern as required (#224342)
+- 2.15.13
+
+-------------------------------------------------------------------
+Fri Jun 8 15:41:19 CEST 2007 - [email protected]
+
+- show ID for GPG key (#275885)
+- 2.15.12
+
+-------------------------------------------------------------------
+Thu Jun 7 13:12:31 CEST 2007 - [email protected]
+
+- fix installation of inst-source-utils in CLI mode (#281792)
+- 2.15.11
+
+-------------------------------------------------------------------
+Wed May 30 10:09:52 CEST 2007 - [email protected]
+
+- added support for source rpm's (#279004)
+- 2.15.10
+
+-------------------------------------------------------------------
+Tue May 22 10:42:36 CEST 2007 - [email protected]
+
+- enable rpm directory with .rpm extension (#276861)
+- 2.15.9
+
+-------------------------------------------------------------------
+Mon May 21 13:21:12 CEST 2007 - [email protected]
+
+- fixed signing content file (#275883)
+- fixed exporting gpg key (#275900)
+- 2.15.8
+
+-------------------------------------------------------------------
+Thu May 17 16:42:33 CEST 2007 - [email protected]
+
+- clear pattern data map before importing next one (#273528)
+- 2.15.7
+
+-------------------------------------------------------------------
+Wed May 2 13:35:22 CEST 2007 - [email protected]
+
+- enable usage of spaces in output path
+- 2.15.6
+
+-------------------------------------------------------------------
+Thu Apr 19 13:58:07 CEST 2007 - [email protected]
+
+- tell GPG to not access tty (#266115)
+- set reasonable default value for LABEL (#265493)
+- 2.15.5
+
+-------------------------------------------------------------------
+Wed Apr 11 13:37:11 CEST 2007 - [email protected]
+
+- really report error if gpg fails (#260588)
+- added 'sign' command for CLI (F302049)
+- 2.15.4
+
+-------------------------------------------------------------------
+Thu Apr 5 10:27:32 CEST 2007 - [email protected]
+
+- added basic Export functionality to support calls from other
+ modules (F301945)
+- added command line interface (F302049)
+- report error if gpg fails (#260588)
+- 2.15.3
+
+-------------------------------------------------------------------
+Tue Mar 6 13:24:15 CET 2007 - [email protected]
+
+- do not allow special characters in pattern names (#251317)
+- 2.15.2
+
+-------------------------------------------------------------------
+Mon Mar 5 15:36:31 CET 2007 - [email protected]
+
+- do not require autoyast2-utils, there is inst-source-utils (#250860)
+- 2.15.1
+
+-------------------------------------------------------------------
+Wed Jan 31 08:58:24 CET 2007 - [email protected]
+
+- initial version for STABLE
+- 2.15.0
+
+-------------------------------------------------------------------
+Tue Jan 30 10:52:26 CET 2007 - [email protected]
+
+- fixed pattern aggent to read language specific keys (#239828)
+- do not sign theproduct when key was not provided (#238282)
+- 2.13.11
+
+-------------------------------------------------------------------
+Thu Dec 14 11:31:53 CET 2006 - [email protected]
+
+- optimize the speed of reading package names (#220535)
+- 2.13.10
+
+-------------------------------------------------------------------
+Wed Nov 15 12:31:02 CET 2006 - [email protected]
+
+- configure iso image file name (#220534)
+- always generate ARCHIVES.gz, INDEX.gz and ls-lR.gz (#221220)
+- offer additional path to packages for editing patterns (#220535)
+- 2.13.9
+
+-------------------------------------------------------------------
+Mon Oct 23 14:00:54 CEST 2006 - [email protected]
+
+- used existing yast-addon.png icon (#213875)
+- 2.13.8
+
+-------------------------------------------------------------------
+Mon Oct 23 10:53:42 CEST 2006 - [email protected]
+
+- support for generating servicepack.tar.gz
+- import 'patches' file
+- minor performance improvements
+- fixed desktop file (#213878)
+- 2.13.7
+
+-------------------------------------------------------------------
+Tue Oct 3 09:17:44 CEST 2006 - [email protected]
+
+- merged proofread texts
+- 2.13.6
+
+-------------------------------------------------------------------
+Wed Sep 20 14:11:22 CEST 2006 - [email protected]
+
+- added generation of GPG keys
+- 2.13.5
+
+-------------------------------------------------------------------
+Mon Sep 11 16:30:29 CEST 2006 - [email protected]
+
+- removed SL10.1 from the list of offered products
+- text fixes from [email protected]
+- 2.13.4
+
+-------------------------------------------------------------------
+Thu Aug 24 13:36:00 CEST 2006 - [email protected]
+
+- dialog configuration for workflow
+- simple (=not bootable) ISO creating
+- updated help texts
+- 2.13.3
+
+-------------------------------------------------------------------
+Tue Aug 22 11:18:29 CEST 2006 - [email protected]
+
+- added reading (importing) of media files (in media.n directories)
+- 2.13.2
+
+-------------------------------------------------------------------
+Wed Aug 16 08:22:31 CEST 2006 - [email protected]
+
+- removed agent for content file (already exists in yast2 package)
+- 2.13.1
+
+-------------------------------------------------------------------
+Thu Aug 10 16:36:55 2006 - [email protected]
+
+- initial version
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude
config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4
--exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh
old/yast2-add-on-creator-3.0.0/package/yast2-add-on-creator.spec
new/yast2-add-on-creator-3.1.0/package/yast2-add-on-creator.spec
--- old/yast2-add-on-creator-3.0.0/package/yast2-add-on-creator.spec
1970-01-01 01:00:00.000000000 +0100
+++ new/yast2-add-on-creator-3.1.0/package/yast2-add-on-creator.spec
2013-10-08 15:12:05.000000000 +0200
@@ -0,0 +1,71 @@
+#
+# spec file for package yast2-add-on-creator
+#
+# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany.
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of their copyright owners, unless otherwise agreed
+# upon. The license for this file, and modifications and additions to the
+# file, is the same license as for the pristine package itself (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
+
+# Please submit bugfixes or comments via http://bugs.opensuse.org/
+#
+
+
+Name: yast2-add-on-creator
+Version: 3.1.0
+Release: 0
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-build
+Source0: %{name}-%{version}.tar.bz2
+
+
+Group: System/YaST
+License: GPL-2.0
+PreReq: %fillup_prereq
+Requires: yast2 >= 2.21.22 rpm-build
+BuildRequires: perl-XML-Writer update-desktop-files yast2 yast2-testsuite
+BuildRequires: yast2-devtools >= 3.0.6
+
+BuildArchitectures: noarch
+
+Requires: yast2-ruby-bindings >= 1.0.0
+
+Summary: YaST2 - module for creating Add-On product
+
+%description
+A wizard for creating your own Add-On product
+
+%prep
+%setup -n %{name}-%{version}
+
+%build
+%yast_build
+
+%install
+%yast_install
+
+
+%post
+%{fillup_only -n add-on-creator}
+
+%files
+%defattr(-,root,root)
+%dir %{yast_yncludedir}/add-on-creator
+%{yast_yncludedir}/add-on-creator/*
+%{yast_clientdir}/add-on-creator*.rb
+%{yast_moduledir}/AddOnCreator.*
+%{yast_moduledir}/PackagesDescr.pm
+%{yast_desktopdir}/add-on-creator.desktop
+%dir %{yast_ydatadir}/add-on-creator
+%{yast_ydatadir}/add-on-creator/*
+#agents:
+%{yast_scrconfdir}/*.scr
+%{yast_agentdir}/ag_*
+%doc %{yast_docdir}
+%doc COPYING
+%{yast_fillupdir}/sysconfig.add-on-creator
--
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]
