Hello community, here is the log from the commit of package yast2-network for openSUSE:13.1 checked in at 2013-10-17 15:22:07 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:13.1/yast2-network (Old) and /work/SRC/openSUSE:13.1/.yast2-network.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "yast2-network" Changes: -------- --- /work/SRC/openSUSE:13.1/yast2-network/yast2-network.changes 2013-09-27 19:41:12.000000000 +0200 +++ /work/SRC/openSUSE:13.1/.yast2-network.new/yast2-network.changes 2013-10-19 16:51:03.000000000 +0200 @@ -1,0 +2,8 @@ +Tue Oct 15 07:26:13 UTC 2013 - [email protected] + +- bnc#845534 + - fixed internal error which appeared when attempting to add an + alias +- 3.0.8 + +------------------------------------------------------------------- Old: ---- yast2-network-3.0.7.tar.bz2 New: ---- yast2-network-3.0.8.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-network.spec ++++++ --- /var/tmp/diff_new_pack.gwXksf/_old 2013-10-19 16:51:03.000000000 +0200 +++ /var/tmp/diff_new_pack.gwXksf/_new 2013-10-19 16:51:03.000000000 +0200 @@ -17,8 +17,8 @@ Name: yast2-network -Version: 3.0.7 -Release: 0 +Version: 3.0.8 +Release: 5 BuildRoot: %{_tmppath}/%{name}-%{version}-build Source0: yast2-network-%{version}.tar.bz2 ++++++ yast2-network-3.0.7.tar.bz2 -> yast2-network-3.0.8.tar.bz2 ++++++ ++++ 4603 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-3.0.7/VERSION new/yast2-network-3.0.8/VERSION --- old/yast2-network-3.0.7/VERSION 2013-09-19 18:01:52.000000000 +0200 +++ new/yast2-network-3.0.8/VERSION 2013-10-15 09:31:28.000000000 +0200 @@ -1 +1 @@ -3.0.7 +3.0.8 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-3.0.7/configure.ac new/yast2-network-3.0.8/configure.ac --- old/yast2-network-3.0.7/configure.ac 2013-09-23 09:57:05.000000000 +0200 +++ new/yast2-network-3.0.8/configure.ac 2013-10-15 09:32:19.000000000 +0200 @@ -3,7 +3,7 @@ dnl -- This file is generated by y2autoconf 3.0.5 - DO NOT EDIT! -- dnl (edit configure.ac.in or configure.in.in instead) -AC_INIT(yast2-network, 3.0.7, http://bugs.opensuse.org/, yast2-network) +AC_INIT(yast2-network, 3.0.8, http://bugs.opensuse.org/, yast2-network) dnl Check for presence of file 'RPMNAME' AC_CONFIG_SRCDIR([RPMNAME]) @@ -18,7 +18,7 @@ AM_INIT_AUTOMAKE(tar-ustar -Wno-portability) dnl Important YaST2 variables -VERSION="3.0.7" +VERSION="3.0.8" RPMNAME="yast2-network" MAINTAINER="Michal Filka <[email protected]>" diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-3.0.7/doc/todo.html new/yast2-network-3.0.8/doc/todo.html --- old/yast2-network-3.0.7/doc/todo.html 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-network-3.0.8/doc/todo.html 2013-10-15 09:32:33.000000000 +0200 @@ -0,0 +1,254 @@ +<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> +<html><head> +<title>Network Configuration: Things To Do</title> +</head><body bgcolor=#ffffff> + +<!-- Author: Michal Svec <[email protected]> --> +<!-- $Id$ --> +<a name="top"><p> +<h1>Network Configuration: Things To Do</h1> +<hr> + +<!-- ##BODY## --> + +<pre> + +# $Id$ + +<hr> +<!--<h2>Bugs </h2>--> + +<h2>Bugs:</h2> +- KInternet: better helptext (configured + kinternet, cinternet) +- ISDN cleanup (adapt to new sources, better sysconfig) [ISDN] + +<a href="http://bugzilla.suse.de/show_bug.cgi?id=35935";>#35935</a> nor yast2 asks for internet test although network config skipped +<a href="http://bugzilla.suse.de/show_bug.cgi?id=37864";>#37864</a> nor kinternet not started after dsl config + +- name resolving doesn't work without /etc/resolv.conf (ResolveIP, ag_hostnames) + +- cleanup ifcfg and hwcfg naming +- cleanup NetworkModules +- fix (or delete) all FIXMEs + +<h2>in-progress:</h2> +- [snwint] ifcfg-usb-usb: detected devices (manual adding done, detected missing) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=22739";>#22739</a>) +- [zoz] routing: restart only routing (<a href="http://bugzilla.suse.de/show_bug.cgi?id=33025";>#33025</a>) + +<hr> +<!--<h2>Features </h2>--> + +<h2>Small Features:</h2> +- host: add (update) all hosts in the local network +- host: scan for hosts on the local network [Add] +- host: show system hosts checkbox (like users have) +- modem: check existence of the modem device in ModemDialog +- routing: summary: print other routes in nice form +- package: include all agents (ag_xauth, ag_resolver, ag_hostnames, ...) +- routing: DHCLIENT_SET_DEFAULT_ROUTE (similar to RESOLV_CONF, HOSTNAME) + +<h2>Large Features:</h2> +- lan: new UI (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29721";>#29721</a>, see also <a href="http://bugzilla.suse.de/show_bug.cgi?id=33801";>#33801</a>) [sigi] +- proxy: use immediately (<a href="http://bugzilla.suse.de/show_bug.cgi?id=23728";>#23728</a>), enhance other programs +- new: IPv6 support (tunnels) +- lan: check IPv6 support is really functional (all fields) +- new: cable connection (slip, plip, ppp, usb) +- hardware: wireless connection (irda, bluetooth) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=35747";>#35747</a>) +- support custom provider from INS file (<a href="http://bugzilla.suse.de/show_bug.cgi?id=25774";>#25774</a>) +- lan: install required packages: dhcpcd|sysconfig|hotplug|wireless-tools (only if needed, before Write?) +- dialup: don't always ask for the mail config (<a href="http://bugzilla.suse.de/show_bug.cgi?id=31472";>#31472</a>) +- lan: ask for the mail config? +- lan: allow configuring a net interface without an IP address (<a href="http://bugzilla.suse.de/show_bug.cgi?id=33801";>#33801</a>) +- routing: other fields (see routes(5)) +- modem: speaker volume as combo (or better as slider) +- not only lan: temporary interface disable (<a href="http://bugzilla.suse.de/show_bug.cgi?id=24926";>#24926</a>) +- lan: myrinet: check for driver presence [warning + info] + +<hr> +<!--<h2>Old Stuff </h2>--> + +- lan: netcards without a driver (what to do on s390?, warn?) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29296";>#29296</a>) +- lan: compiled in kernel drivers (#???) + offer them besides modularized drivers? src/lan/cards.ycp? + +<h2>Improvements:</h2> +- dns: two resolv.conf scrconfs (resolv.conf.saved.by.dhcpcd, <a href="http://bugzilla.suse.de/show_bug.cgi?id=38834";>#38834</a>) XXX? +- lan: check link presence (see sysconfig.rpm how is it done, or was it RH?) +- routing: check already present default route (partially <a href="http://bugzilla.suse.de/show_bug.cgi?id=11132";>#11132</a>c26) +- routines: check for yast2-mail presence +- provider: offer to delete provider after device delete if not used (<a href="http://bugzilla.suse.de/show_bug.cgi?id=16094";>#16094</a>) +- provider: delete default route if removed (<a href="http://bugzilla.suse.de/show_bug.cgi?id=10739";>#10739</a>) +- lan: warn before the network restart (<a href="http://bugzilla.suse.de/show_bug.cgi?id=27137";>#27137</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=19851";>#19851</a>) [WARN] +- lan: yp configuration failed (<a href="http://bugzilla.suse.de/show_bug.cgi?id=25506";>#25506</a>) + ask if network should be restarted +- dns: better "DNS and Hostname" and "Hosts" titles (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29722";>#29722</a>) +- dns: better message for broken fields (eg. domain) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=22802";>#22802</a>) +- lan: ssh installation (install.inf format) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=24836";>#24836</a>) + duplicate Alias lines; maybe not necessary, review <a href="http://bugzilla.suse.de/show_bug.cgi?id=22444";>#22444</a> +- dialup: mail question only if new device was added + yast ui config XXX? + +<h2>Enhancements:</h2> +- detection (netprobe, dhcpcd) <a href="http://bugzilla.suse.de/show_bug.cgi?id=15489";>#15489</a> (see also <a href="http://bugzilla.suse.de/show_bug.cgi?id=7287";>#7287</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=13200";>#13200</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=9951";>#9951</a>) + <a href="http://bugzilla.suse.de/show_bug.cgi?id=7287";>#7287</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=13200";>#13200</a> are dups of <a href="http://bugzilla.suse.de/show_bug.cgi?id=16471";>#16471</a>: take info from linuxrc +- modem: pap|chap secrets writing (isdn may do it already), not sure if it's useful +- providers: no-global-values (ini-agent parameter, ease of use: flat(<a href="http://bugzilla.suse.de/show_bug.cgi?id=21867";>#21867</a>)?) +- providers: -> HWDB-NG +- all: edit without restart (reload) +- device: use map instead of variables (-> fill all variables) +- package: require yast2-language, yast2-mail, ... (maybe do that at runtime) +- feature: IP-masquerading (<a href="http://bugzilla.suse.de/show_bug.cgi?id=16131";>#16131</a>), is already in the firewall +- routing: default route without GW (<a href="http://bugzilla.suse.de/show_bug.cgi?id=23977";>#23977</a>) +- dsl: flat rate (<a href="http://bugzilla.suse.de/show_bug.cgi?id=27840";>#27840</a>) +- improve modules.conf options merging (maybe obsolete with 2.6) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=29995";>#29995</a>) +- make DHCP options iface-local (questionable) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=30476";>#30476</a>) +- edit dsl HW goes through provider again (default provider?) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=24000";>#24000</a>) +- allow to change the netcard type (for a broken detection) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=30890";>#30890</a>) +- skip detect check box (general yast2 feature) (<a href="http://bugzilla.suse.de/show_bug.cgi?id=31478";>#31478</a>) +- installation: better network configuration (inst_netcfg, create_interfaces) +- host: drop oldhostentry file +- host: better deleted hostnames handling + +<hr> +<!--<h2>New Bugs </h2>--> + +<h2>New in Bugzilla:</h2> + +<a href="http://bugzilla.suse.de/show_bug.cgi?id=33071";>#33071</a> enh provide a per interface routing configuration +<a href="http://bugzilla.suse.de/show_bug.cgi?id=33649";>#33649</a> cri yast2 ISDN module always activates personal firewall +<a href="http://bugzilla.suse.de/show_bug.cgi?id=34626";>#34626</a> enh Allow giving a net interface an arbitrary name +<a href="http://bugzilla.suse.de/show_bug.cgi?id=35221";>#35221</a> nor LATER Better behavior with multiple dhcp clients +<a href="http://bugzilla.suse.de/show_bug.cgi?id=35638";>#35638</a> min On Abort, ask only if there have been any changes +<a href="http://bugzilla.suse.de/show_bug.cgi?id=35671";>#35671</a> min Yast2 deletes hostname aliases, if more than one are present +<a href="http://bugzilla.suse.de/show_bug.cgi?id=35955";>#35955</a> min LATER Obsolete NETWORK, BROADCAST, NETMASK, UNIQUE in ifcfg +<a href="http://bugzilla.suse.de/show_bug.cgi?id=37520";>#37520</a> enh LATER Let user identify ifcfg by MAC, bus id, vpid... +<a href="http://bugzilla.suse.de/show_bug.cgi?id=38213";>#38213</a> min YaST network forgets configuration name proposal +<a href="http://bugzilla.suse.de/show_bug.cgi?id=38031";>#38031</a> nor Changing network environment causes resolver problems +<a href="http://bugzilla.suse.de/show_bug.cgi?id=38135";>#38135</a> min after deleting the only configured modem, yast2-mail is run +<a href="http://bugzilla.suse.de/show_bug.cgi?id=38746";>#38746</a> nor dsl config is not working with two network cards +<a href="http://bugzilla.suse.de/show_bug.cgi?id=39027";>#39027</a> min LATER "Back" button is interpreted as "Abort" +<a href="http://bugzilla.suse.de/show_bug.cgi?id=40012";>#40012</a> enh LATER Allow editing the whole resolver search list +<a href="http://bugzilla.suse.de/show_bug.cgi?id=40254";>#40254</a> nor LATER Allow choosing the encoding for passwords +<a href="http://bugzilla.suse.de/show_bug.cgi?id=40458";>#40458</a> nor LATER Improve VNC Remote Administration +<a href="http://bugzilla.suse.de/show_bug.cgi?id=40861";>#40861</a> enh LATER Add "Test connection" button to proxy etc. config +<a href="http://bugzilla.suse.de/show_bug.cgi?id=41204";>#41204</a> enh LATER unconnected network card is assumed to be connected + +<hr> +<!--<h2>Documentation </h2>--> + +<h2>Documentation:</h2> +- example dhcpcd-eth0.info +- example intstall.inf's +- Net-HOWTO link +- s390 devices (see bellow, also from mails) +- overall device overview (see bellow, also required data like IP, RI, NM) +- UIMODE: link to autodocs +- doc: adding network device mini-howto: grep for "escon" for example +- doc: include public_html/network, dia, ... + +<h2>New device type:</h2> +- lan/cards.ycp add type cards (at least one entry) +- lan/hardware.ycp update "device_types" list +- modules/NetworkDevices.ycp update "netcard" list +- routines/complex.ycp add "device_name" to CheckEmptyName +- routines/hardware.ycp update ControllerType (detection) +- routines/summary.ycp add "device_type" to DeviceType + +<h2>Debug (bugzilla):</h2> +- 'hwinfo --all --log hwinfo.log' +- /etc/sysconfig/hardware/hwcfg-* +- /etc/sysconfig/network/ifcfg-* +- /etc/sysconfig/network/ifroute-* +- /var/lib/YaST2/install.inf +- /var/log/YaST2/y2log* + +- /etc/sysconfig/network/providers/* [dialup problems] + +- /etc/sysconfig/network/config +- /etc/sysconfig/network/dhcp +- /etc/sysconfig/network/routes + +- /etc/resolv.conf [DNS problems] + +- /etc/modprobe.conf +- /etc/modprobe.conf.local +- /etc/modprobe.d/* + +- 'ip a' +- /var/log/messages + +<hr> +<!--<h2>Details for some of the above </h2>--> + +<h2>ISDN:</h2> +- code cleanup (use yast2-network structure: Provider, devices, ...) +- UI cleanup (http://w3.suse.de/~sigi/yast2/modules/isdn/81isdn/isdn81_improvement_it01.html) +- isdn: start mail after config (<a href="http://bugzilla.suse.de/show_bug.cgi?id=18256";>#18256</a>) + +<h2>WARN:</h2> +- <a href="http://bugzilla.suse.de/show_bug.cgi?id=19851";>#19851</a>, <a href="http://bugzilla.suse.de/show_bug.cgi?id=27137";>#27137</a> +- warn before rcnetwork restart -> RestartNetwork() || StopNetwork(); +- see routines/runtime.ycp:RunningLocal() + +<hr> +<!--<h2>Ancient Stuff </h2>--> + +<h2>TO-SORT:</h2> + +- all: use rcnetwork reload (but probably only in some cases, things like + remove 2 eth cards and add them in a different order won't work due to + the kernel modules not being unloaded) + * "rcnetwork reload" (if DeletedModules\!=[] "restart") + +- routines: -> FIREWALL=yes|no to each ifcfg-XXX <a href="http://bugzilla.suse.de/show_bug.cgi?id=18840";>#18840</a> (support for modems) + +<hr> +<!--<h2>Some details, other stuff, old </h2>--> + +<h2>DOC:</h2> +- doc: dummy: IP/NM/BC +- doc: irlan: IP/NM/BC (eth?) +- doc: irnet: IP/RI (?) +- doc: plip: IP/RI (Parallel Line IP) +- doc: slip: IP/RI (Serial Line IP, obsoleted by PPP) +- doc: ppp: IP/RI (Serial Point-To-Point protocol) + +<h2>UI proposal:</h2> +- detected +- choose your card (current list) +- hw params only (current manual) + +<h2>Hardware:</h2> +- usb: network cabel, ethernet card, TR card, ISDN card, modem +- pcmcia: ethernet card, TR card, ISDN card, modem +- wireless network cards +- fddi card + +- make device optional in routes agent +- DefaultDevice(ip) + check all PPP connections (REMOTEIP) + other devices + - take IP + - if(network(IP) == network(ip)) return x; +- compare with old lan +- where is this used? + +<h2>Modules:</h2> +- see the "*ISDN*" paper + +MODULES=$[]; -> Lan.ycp +DELETED=[]; -> Lan.ycp +ReadModules(); -> M +WriteModules(); <- D,M +Select: C,M -> global vars +AddEdit: global vars -> C,M +Delete: global vars -> C,M,D + +<hr> +<!--<h2>EOF :-) </h2>--> + +</pre> + +<!-- ##BODY## --> + +</body></html> diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-3.0.7/missing new/yast2-network-3.0.8/missing --- old/yast2-network-3.0.7/missing 2013-09-23 09:57:10.000000000 +0200 +++ new/yast2-network-3.0.8/missing 2013-10-15 09:32:21.000000000 +0200 @@ -1,10 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-01-06.18; # UTC +scriptversion=2012-06-26.16; # UTC -# Copyright (C) 1996-2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <[email protected]>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <[email protected]>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -29,61 +29,33 @@ exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, 'missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file 'aclocal.m4' - autoconf touch file 'configure' - autoheader touch file 'config.h.in' - autom4te touch the output file, or create a stub one - automake touch all 'Makefile.in' files - bison create 'y.tab.[ch]', if possible, from existing .[ch] - flex create 'lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create 'lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create 'y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. @@ -98,228 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown '$1' option" + echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running '$TOOL --version' or '$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'acinclude.m4' or '${configure_ac}'. You might want - to install the Automake and Perl packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified '${configure_ac}'. You might want to install the - Autoconf and GNU m4 packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'acconfig.h' or '${configure_ac}'. You might want - to install the Autoconf and GNU m4 packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - automake*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'. - You might want to install the Automake and Perl packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: '$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get '$1' as part of Autoconf from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: '$1' $msg. You should only need it if - you modified a '.y' file. You may need the Bison package - in order for those modifications to take effect. You can get - Bison from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a '.l' file. You may need the Flex package - in order for those modifications to take effect. You can get - Flex from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - Help2man package in order for those modifications to take - effect. You can get Help2man from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a '.texi' or '.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy 'make' (AIX, - DU, IRIX). You might want to install the Texinfo package or - the GNU make package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: '$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the 'README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing '$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'automa4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-3.0.7/src/include/network/lan/virtual.rb new/yast2-network-3.0.8/src/include/network/lan/virtual.rb --- old/yast2-network-3.0.7/src/include/network/lan/virtual.rb 2013-09-23 09:56:51.000000000 +0200 +++ new/yast2-network-3.0.8/src/include/network/lan/virtual.rb 2013-10-15 09:31:23.000000000 +0200 @@ -232,7 +232,7 @@ UI.ChangeWidget( Id(:name), :ValidChars, - String.calnum + String.CAlnum ) UI.ChangeWidget(Id(:ipaddr), :ValidChars, IP.ValidChars) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/yast2-network-3.0.7/test-driver new/yast2-network-3.0.8/test-driver --- old/yast2-network-3.0.7/test-driver 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-network-3.0.8/test-driver 2013-10-15 09:32:22.000000000 +0200 @@ -0,0 +1,127 @@ +#! /bin/sh +# test-driver - basic testsuite driver script. + +scriptversion=2012-06-27.10; # UTC + +# Copyright (C) 2011-2013 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to <[email protected]> or send patches to +# <[email protected]>. + +# Make unconditional expansion of undefined variables an error. This +# helps a lot in preventing typo-related bugs. +set -u + +usage_error () +{ + echo "$0: $*" >&2 + print_usage >&2 + exit 2 +} + +print_usage () +{ + cat <<END +Usage: + test-driver --test-name=NAME --log-file=PATH --trs-file=PATH + [--expect-failure={yes|no}] [--color-tests={yes|no}] + [--enable-hard-errors={yes|no}] [--] TEST-SCRIPT +The '--test-name', '--log-file' and '--trs-file' options are mandatory. +END +} + +# TODO: better error handling in option parsing (in particular, ensure +# TODO: $log_file, $trs_file and $test_name are defined). +test_name= # Used for reporting. +log_file= # Where to save the output of the test script. +trs_file= # Where to save the metadata of the test run. +expect_failure=no +color_tests=no +enable_hard_errors=yes +while test $# -gt 0; do + case $1 in + --help) print_usage; exit $?;; + --version) echo "test-driver $scriptversion"; exit $?;; + --test-name) test_name=$2; shift;; + --log-file) log_file=$2; shift;; + --trs-file) trs_file=$2; shift;; + --color-tests) color_tests=$2; shift;; + --expect-failure) expect_failure=$2; shift;; + --enable-hard-errors) enable_hard_errors=$2; shift;; + --) shift; break;; + -*) usage_error "invalid option: '$1'";; + esac + shift +done + +if test $color_tests = yes; then + # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'. + red='[0;31m' # Red. + grn='[0;32m' # Green. + lgn='[1;32m' # Light green. + blu='[1;34m' # Blue. + mgn='[0;35m' # Magenta. + std='[m' # No color. +else + red= grn= lgn= blu= mgn= std= +fi + +do_exit='rm -f $log_file $trs_file; (exit $st); exit $st' +trap "st=129; $do_exit" 1 +trap "st=130; $do_exit" 2 +trap "st=141; $do_exit" 13 +trap "st=143; $do_exit" 15 + +# Test script is run here. +"$@" >$log_file 2>&1 +estatus=$? +if test $enable_hard_errors = no && test $estatus -eq 99; then + estatus=1 +fi + +case $estatus:$expect_failure in + 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;; + 0:*) col=$grn res=PASS recheck=no gcopy=no;; + 77:*) col=$blu res=SKIP recheck=no gcopy=yes;; + 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;; + *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;; + *:*) col=$red res=FAIL recheck=yes gcopy=yes;; +esac + +# Report outcome to console. +echo "${col}${res}${std}: $test_name" + +# Register the test result, and other relevant metadata. +echo ":test-result: $res" > $trs_file +echo ":global-test-result: $res" >> $trs_file +echo ":recheck: $recheck" >> $trs_file +echo ":copy-in-global-log: $gcopy" >> $trs_file + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
