Hello community, here is the log from the commit of package yast2-users for openSUSE:Factory checked in at 2013-11-18 14:59:36 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/yast2-users (Old) and /work/SRC/openSUSE:Factory/.yast2-users.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "yast2-users" Changes: -------- --- /work/SRC/openSUSE:Factory/yast2-users/yast2-users.changes 2013-10-11 11:11:57.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.yast2-users.new/yast2-users.changes 2013-11-18 14:59:38.000000000 +0100 @@ -1,0 +2,24 @@ +Wed Nov 13 15:56:18 UTC 2013 - [email protected] + +- Add explicit COPYING file + +------------------------------------------------------------------- +Wed Nov 13 12:32:34 UTC 2013 - [email protected] + +- require non-empty root password in the 1st stage (configuring + later is not possible, the 2nd stage has been removed) + +------------------------------------------------------------------- +Mon Nov 11 12:09:27 UTC 2013 - [email protected] + +- properly crypt the password for the initial user +- 3.1.2 + +------------------------------------------------------------------- +Wed Oct 30 14:09:52 UTC 2013 - [email protected] + +- do not save the data for the 2nd stage, create the users + in the 1st stage directly +- 3.1.1 + +------------------------------------------------------------------- Old: ---- yast2-users-3.1.0.tar.bz2 New: ---- yast2-users-3.1.3.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ yast2-users.spec ++++++ --- /var/tmp/diff_new_pack.ZtHXv0/_old 2013-11-18 14:59:38.000000000 +0100 +++ /var/tmp/diff_new_pack.ZtHXv0/_new 2013-11-18 14:59:38.000000000 +0100 @@ -17,7 +17,7 @@ Name: yast2-users -Version: 3.1.0 +Version: 3.1.3 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -115,7 +115,6 @@ %{yast_plugindir}/libpy2ag_crack.so %{yast_plugindir}/libpy2ag_crack.la %dir %{yast_docdir} -%doc %{yast_docdir}/README %doc %{yast_docdir}/COPYING %doc %{yast_docdir}/TODO.txt %doc %{yast_docdir}/users.html ++++++ yast2-users-3.1.0.tar.bz2 -> yast2-users-3.1.3.tar.bz2 ++++++ diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/CONTRIBUTING.md new/yast2-users-3.1.3/CONTRIBUTING.md --- old/yast2-users-3.1.0/CONTRIBUTING.md 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-users-3.1.3/CONTRIBUTING.md 2013-11-15 13:22:04.000000000 +0100 @@ -0,0 +1,87 @@ +YaST Contribution Guidelines +============================ + +YaST is an open source project and as such it welcomes all kinds of +contributions. If you decide to contribute, please follow these guidelines to +ensure the process is effective and pleasant both for you and YaST maintainers. + +There are two main forms of contribution: reporting bugs and performing code +changes. + +Bug Reports +----------- + +If you find a problem, please report it either using +[Bugzilla](https://bugzilla.novell.com/enter_bug.cgi?format=guided&product=openSUSE+Factory&component=YaST2) +or [GitHub issues](../../issues). (For Bugzilla, use the [simplified +registration](https://secure-www.novell.com/selfreg/jsp/createSimpleAccount.jsp) +if you don't have an account yet.) + +If you find a problem, please report it either using +[Bugzilla](https://bugzilla.novell.com/) or GitHub issues. We can't guarantee +that every bug will be fixed, but we'll try. + +When creating a bug report, please follow our [bug reporting +guidelines](http://en.opensuse.org/openSUSE:Report_a_YaST_bug). + +Code Changes +------------ + +We welcome all kinds of code contributions, from simple bug fixes to significant +refactorings and implementation of new features. However, before making any +non-trivial contribution, get in touch with us first — this can prevent wasted +effort on both sides. Also, have a look at our [development +documentation](http://en.opensuse.org/openSUSE:YaST_development). + +To send us your code change, use GitHub pull requests. The workflow is as +follows: + + 1. Fork the project. + + 2. Create a topic branch based on `master`. + + 3. Implement your change, including tests (if possible). Make sure you adhere + to the [Ruby style + guide](https://github.com/SUSE/style-guides/blob/master/Ruby.md). + + 4. Make sure your change didn't break anything by building the RPM package + (`rake osc:build`). The build process includes running the full testsuite. + + 5. Publish the branch and create a pull request. + + 6. YaST developers will review your change and possibly point out issues. + Adapt the code under their guidance until they are all resolved. + + 7. Finally, the pull request will get merged or rejected. + +See also [GitHub's guide on +contributing](https://help.github.com/articles/fork-a-repo). + +If you want to do multiple unrelated changes, use separate branches and pull +requests. + +Do not change the `VERSION` and `*.changes` files as this could lead to +conflicts. + +### Commits + +Each commit in the pull request should do only one thing, which is clearly +described by its commit message. Especially avoid mixing formatting changes and +functional changes into one commit. When writing commit messages, adhere to +[widely used +conventions](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html). + +If your commit is related to a bug in Buzgilla or an issue on GitHub, make sure +you mention it in the commit message for cross-reference. Use format like +bnc#775814 or gh#yast/yast-foo#42. See also [GitHub +autolinking](https://help.github.com/articles/github-flavored-markdown#references) +and [openSUSE abbreviation +reference](http://en.opensuse.org/openSUSE:Packaging_Patches_guidelines#Current_set_of_abbreviations). + +Additional Information +---------------------- + +If you have any question, feel free to ask at the [development mailing +list](http://lists.opensuse.org/yast-devel/) or at the +[#yast](http://webchat.freenode.net/?channels=%23yast) IRC channel on freenode. +We'll do our best to provide a timely and accurate answer. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/COPYING new/yast2-users-3.1.3/COPYING --- old/yast2-users-3.1.0/COPYING 1970-01-01 01:00:00.000000000 +0100 +++ new/yast2-users-3.1.3/COPYING 2013-11-15 13:22:04.000000000 +0100 @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Lesser General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/VERSION new/yast2-users-3.1.3/VERSION --- old/yast2-users-3.1.0/VERSION 2013-10-08 12:59:24.000000000 +0200 +++ new/yast2-users-3.1.3/VERSION 2013-11-15 13:22:04.000000000 +0100 @@ -1 +1 @@ -3.1.0 +3.1.3 diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/package/yast2-users.changes new/yast2-users-3.1.3/package/yast2-users.changes --- old/yast2-users-3.1.0/package/yast2-users.changes 2013-10-08 12:59:24.000000000 +0200 +++ new/yast2-users-3.1.3/package/yast2-users.changes 2013-11-15 13:22:04.000000000 +0100 @@ -1,4 +1,28 @@ ------------------------------------------------------------------- +Wed Nov 13 15:56:18 UTC 2013 - [email protected] + +- Add explicit COPYING file + +------------------------------------------------------------------- +Wed Nov 13 12:32:34 UTC 2013 - [email protected] + +- require non-empty root password in the 1st stage (configuring + later is not possible, the 2nd stage has been removed) + +------------------------------------------------------------------- +Mon Nov 11 12:09:27 UTC 2013 - [email protected] + +- properly crypt the password for the initial user +- 3.1.2 + +------------------------------------------------------------------- +Wed Oct 30 14:09:52 UTC 2013 - [email protected] + +- do not save the data for the 2nd stage, create the users + in the 1st stage directly +- 3.1.1 + +------------------------------------------------------------------- Thu Sep 19 17:45:35 UTC 2013 - [email protected] - do not use *.spec.in template, use *.spec file with RPM macros diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/package/yast2-users.spec new/yast2-users-3.1.3/package/yast2-users.spec --- old/yast2-users-3.1.0/package/yast2-users.spec 2013-10-08 12:59:24.000000000 +0200 +++ new/yast2-users-3.1.3/package/yast2-users.spec 2013-11-15 13:22:04.000000000 +0100 @@ -17,7 +17,7 @@ Name: yast2-users -Version: 3.1.0 +Version: 3.1.3 Release: 0 BuildRoot: %{_tmppath}/%{name}-%{version}-build @@ -89,7 +89,6 @@ %{yast_plugindir}/libpy2ag_crack.so %{yast_plugindir}/libpy2ag_crack.la %dir %{yast_docdir} -%doc %{yast_docdir}/README %doc %{yast_docdir}/COPYING %doc %{yast_docdir}/TODO.txt %doc %{yast_docdir}/users.html diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/src/clients/inst_root_first.rb new/yast2-users-3.1.3/src/clients/inst_root_first.rb --- old/yast2-users-3.1.0/src/clients/inst_root_first.rb 2013-10-08 12:27:12.000000000 +0200 +++ new/yast2-users-3.1.3/src/clients/inst_root_first.rb 2013-11-15 13:22:04.000000000 +0100 @@ -183,28 +183,13 @@ @ret = :notnext next end - if @pw1 == "" - # yes-no popup headline - if Popup.YesNoHeadline( - _("No Password Entered"), - # yes-no popup contents - _( - "If you leave the password empty,\n" + - "you will be asked for it later during the configuration sequence.\n" + - "\n" + - "Leave it empty for now?" - ) - ) - Builtins.y2milestone( - "root password setting skipped, will occur later" - ) - UsersSimple.SetRootPassword(@pw1) - break - else - @ret = :notnext - next - end + + if @pw1.empty? + Popup.Error(_("No password entered.\nTry again.")) + @ret = :notnext + next end + @error = UsersSimple.CheckPassword(@pw1, "local") if @error != "" Report.Error(@error) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/src/clients/inst_user.rb new/yast2-users-3.1.3/src/clients/inst_user.rb --- old/yast2-users-3.1.0/src/clients/inst_user.rb 2013-10-08 12:27:12.000000000 +0200 +++ new/yast2-users-3.1.3/src/clients/inst_user.rb 2013-11-15 13:22:04.000000000 +0100 @@ -49,6 +49,8 @@ Yast.import "Wizard" Yast.include self, "users/wizards.rb" + # create_users() + Yast.include self, "users/routines.rb" @ret = :back @importing = false @@ -225,35 +227,9 @@ ReadDialog(false) # clear the cache from imported data Users.ResetCurrentUser Builtins.y2milestone("There are some users to import") - Builtins.foreach( - Convert.convert( - @import_u, - :from => "list", - :to => "list <map <string, any>>" - ) - ) do |user| - Ops.set(user, "encrypted", true) - # check if default group exists - if Builtins.haskey(user, "gidNumber") - g = Users.GetGroup(GetInt(Ops.get(user, "gidNumber"), -1), "") - if g == {} - g = Users.GetGroupByName( - Ops.get_string(user, "groupname", ""), - "" - ) - if g != {} - Ops.set(user, "gidNumber", Ops.get_integer(g, "gidNumber", -1)) - else - user = Builtins.remove(user, "gidNumber") - end - end - end - error = Users.AddUser(user) - Builtins.y2error("error while adding user: %1", error) if error != "" - error = Users.CheckUser({}) - Builtins.y2error("error while adding user: %1", error) if error != "" - Users.CommitUser - end + + create_users(@import_u) + WriteDialog(false) @ret = :auto else diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/src/clients/users_finish.rb new/yast2-users-3.1.3/src/clients/users_finish.rb --- old/yast2-users-3.1.0/src/clients/users_finish.rb 2013-10-08 12:27:12.000000000 +0200 +++ new/yast2-users-3.1.3/src/clients/users_finish.rb 2013-11-15 13:22:04.000000000 +0100 @@ -31,9 +31,12 @@ def main textdomain "users" + Yast.import "Users" Yast.import "UsersSimple" - @ret = nil + # create_users() + Yast.include self, "users/routines.rb" + @func = "" @param = {} @@ -59,15 +62,29 @@ "when" => [:installation, :live_installation, :autoinst] } elsif @func == "Write" + # disable UI (progress) + Users.SetGUI(false) + + # write the root password UsersSimple.Write + + @users = UsersSimple.GetUsers + + if [email protected]? + Users.Read + Users.ResetCurrentUser + Builtins.y2milestone("There are #{@users.size} users to import") + + create_users(@users) + + Users.Write + end else Builtins.y2error("unknown function: %1", @func) - @ret = nil end - Builtins.y2debug("ret=%1", @ret) Builtins.y2milestone("users_finish finished") - deep_copy(@ret) + nil end end end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/src/include/users/routines.rb new/yast2-users-3.1.3/src/include/users/routines.rb --- old/yast2-users-3.1.0/src/include/users/routines.rb 2013-10-08 12:27:12.000000000 +0200 +++ new/yast2-users-3.1.3/src/include/users/routines.rb 2013-11-15 13:22:04.000000000 +0100 @@ -45,8 +45,8 @@ value = deep_copy(value) return default_value if value == nil return Convert.to_integer(value) if Ops.is_integer?(value) - if Ops.is_string?(value) && value != "" - return Builtins.tointeger(Convert.to_string(value)) + if Ops.is_string?(value) && !value.empty? + return value.to_i end default_value end @@ -105,4 +105,36 @@ Builtins.size(proc) != 0 && !Mode.config end end + + # create users from a list + def create_users(users) + users.each do |user| + # check if default group exists + if user.has_key?("gidNumber") + g = Users.GetGroup(GetInt(Ops.get(user, "gidNumber"), -1), "") + if g.empty? + g = Users.GetGroupByName(user["groupname"]), + if g.empty? + user = Builtins.remove(user, "gidNumber") + else + user["gidNumber"] = g["gidNumber"] + end + end + end + + error = Users.AddUser(user) + + if error.empty? + # empty hash means the user added by Users.AddUser call before + error = Users.CheckUser({}) + end + + if error.empty? + Users.CommitUser + else + Builtins.y2error("error while adding user: #{error}") + Users.ResetCurrentUser + end + end + end end diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/src/modules/Users.pm new/yast2-users-3.1.3/src/modules/Users.pm --- old/yast2-users-3.1.0/src/modules/Users.pm 2013-10-08 12:27:12.000000000 +0200 +++ new/yast2-users-3.1.3/src/modules/Users.pm 2013-11-15 13:22:04.000000000 +0100 @@ -4803,8 +4803,6 @@ $users_modified = 0; $groups_modified = 0; - sleep (1); - return $ret; } diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' old/yast2-users-3.1.0/src/modules/UsersSimple.pm new/yast2-users-3.1.3/src/modules/UsersSimple.pm --- old/yast2-users-3.1.0/src/modules/UsersSimple.pm 2013-10-08 12:27:12.000000000 +0200 +++ new/yast2-users-3.1.3/src/modules/UsersSimple.pm 2013-11-15 13:22:04.000000000 +0100 @@ -125,9 +125,6 @@ # if check for LDAP/Kerberos via DNS was done my $network_methods_checked = 0; -# prevent re-reading data map with 1st stage settingss -my $first_stage_data_not_read = 1; - # note if users configuration should be run or skipped in 2nd stage (bnc#450231) my $skip_user_creation = 0; @@ -901,107 +898,27 @@ ##--------------------------------------------------------------------------- ## Read/Write functions -# Writes the settings configured in 1st stage +# Writes the root password configured in the 1st stage BEGIN { $TYPEINFO{Write} = ["function", "boolean"];} sub Write { - my $self = shift; - my $user_defined = 0; - foreach my $user (@users) { - if (defined $user->{"userPassword"}) { - if (!defined $user->{"__imported"}) { - $user->{"userPassword"} = - $self->CryptPassword($user->{"userPassword"}); - } - $user->{"encrypted"} = YaST::YCP::Integer (1); - } - $user_defined = 1; - } - my %data = ( - "after_auth" => $after_auth, - "run_krb_config" => YaST::YCP::Integer ($run_krb_config), - "users" => \@users, - "encryption_method" => $encryption_method, - "root_alias" => $root_alias, - "autologin_user" => $autologin_user - ); - if ($root_password) { - # indication to inst_root - $data{"root_password_written"} = YaST::YCP::Integer (1); - } - my $file = Directory->vardir()."/users_first_stage.ycp"; - my $ret = SCR->Write (".target.ycp", $file, \%data); - y2milestone ("1st stage user information written: ", $ret); - - # make the file root only readable - SCR->Execute (".target.bash", "chmod 600 $file") if ($ret); - - my $redraw = 0; if ($root_password) { # write root password now - $self->WriteRootPassword (); - } - else { - y2milestone ("enabling step 'root' for second stage"); - ProductControl->EnableModule ("root"); - } - # enable inst_user to either run auth client or write first user - if ($after_auth ne "users" || $user_defined) { - # do not let both steps to run (bnc#672139) - if ($user_defined) { - y2milestone ("enabling 'user_non_interactive', disabling 'user' for second stage"); - ProductControl->EnableModule ("user_non_interactive"); - ProductControl->DisableModule ("user"); - } - else { - y2milestone ("enabling 'user', disabling 'user_non_interactive' for second stage"); - ProductControl->EnableModule ("user"); - ProductControl->DisableModule ("user_non_interactive"); - } - } - # no user entered + 2nd stage visible => enable clients (bnc#393722) - elsif (!ProductControl->GetUseAutomaticConfiguration ()) { - y2milestone ("enabling steps 'auth' and 'user' for second stage"); - ProductControl->EnableModule ("auth"); - ProductControl->EnableModule ("user"); + return $self->WriteRootPassword (); } - return $ret; + return bool (1); } -# Read the settings configured in 1st stage +# Empty function (kept for backward compatibility) BEGIN { $TYPEINFO{Read} = ["function", "boolean", "boolean"];} sub Read { my $self = shift; my $force = shift; - my $file = Directory->vardir()."/users_first_stage.ycp"; - my $ret = 0; - if (Stage->cont () && FileUtils->Exists ($file) && - ($force || $first_stage_data_not_read)) - { - my $data = SCR->Read (".target.ycp", $file); - $first_stage_data_not_read = 0; - if (defined $data && ref ($data) eq "HASH") { - - $autologin_user = $data->{"autologin_user"} || ""; - $root_alias = $data->{"root_alias"} || ""; - $after_auth = $data->{"after_auth"} || $after_auth; - $encryption_method = - $data->{"encryption_method"} || $encryption_method; - $run_krb_config = bool ($data->{"run_krb_config"}); - if (ref ($data->{"users"}) eq "ARRAY") { - @users = @{$data->{"users"}}; - } - $root_password_written = bool ($data->{"root_password_written"}); - $users_written = bool ($data->{"users_written"}); - $ret = 1; - } -# SCR->Execute (".target.remove", $file); - } - return bool ($ret); + return bool (1); } # Remove the private data from users_first_stage.ycp after they were -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
