Hello community, here is the log from the commit of package wpa_supplicant for openSUSE:Factory checked in at 2014-06-25 06:57:59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/wpa_supplicant (Old) and /work/SRC/openSUSE:Factory/.wpa_supplicant.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "wpa_supplicant" Changes: -------- --- /work/SRC/openSUSE:Factory/wpa_supplicant/wpa_supplicant.changes 2014-06-19 13:08:29.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.wpa_supplicant.new/wpa_supplicant.changes 2014-06-25 06:58:10.000000000 +0200 @@ -1,0 +2,6 @@ +Thu Jun 19 07:34:35 UTC 2014 - [email protected] + +- Update the build config based on the new defconfig +- Remove the libnl1 requirement. It's not supported. + +------------------------------------------------------------------- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ wpa_supplicant.spec ++++++ --- /var/tmp/diff_new_pack.qV3a44/_old 2014-06-25 06:58:11.000000000 +0200 +++ /var/tmp/diff_new_pack.qV3a44/_new 2014-06-25 06:58:11.000000000 +0200 @@ -27,12 +27,7 @@ BuildRequires: systemd-rpm-macros %systemd_requires %endif -%if 0%{?suse_version} > 1140 -BuildRequires: libnl-1_1-devel BuildRequires: libnl3-devel -%else -BuildRequires: libnl-devel -%endif Url: http://hostap.epitest.fi/wpa_supplicant/ Version: 2.2 Release: 0 @@ -87,9 +82,6 @@ %setup -q -n wpa_supplicant-%{version} rm -rf wpa_supplicant-%{version}/patches cp %{SOURCE1} wpa_supplicant/.config -%if 0%{?suse_version} > 1140 -echo "CONFIG_LIBNL32=y" >> wpa_supplicant/.config -%endif %patch1 -p0 %patch2 -p1 ++++++ config ++++++ --- /var/tmp/diff_new_pack.qV3a44/_old 2014-06-25 06:58:11.000000000 +0200 +++ /var/tmp/diff_new_pack.qV3a44/_new 2014-06-25 06:58:11.000000000 +0200 @@ -20,63 +20,6 @@ # used to fix build issues on such systems (krb5.h not found). #CFLAGS += -I/usr/include/kerberos -# Example configuration for various cross-compilation platforms - -#### sveasoft (e.g., for Linksys WRT54G) ###################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS += -I../src/include -I../../src/router/openssl/include -#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl -############################################################################### - -#### openwrt (e.g., for Linksys WRT54G) ####################################### -#CC=mipsel-uclibc-gcc -#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc -#CFLAGS += -Os -#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ -# -I../WRT54GS/release/src/include -#LIBS = -lssl -############################################################################### - - -# Driver interface for Host AP driver -CONFIG_DRIVER_HOSTAP=y - -# Driver interface for Agere driver -#CONFIG_DRIVER_HERMES=y -# Change include directories to match with the local setup -#CFLAGS += -I../../hcf -I../../include -I../../include/hcf -#CFLAGS += -I../../include/wireless - -# Driver interface for madwifi driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_MADWIFI=y -# Set include directory to the madwifi source tree -#CFLAGS += -I../../madwifi - -# Driver interface for ndiswrapper -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -CONFIG_DRIVER_NDISWRAPPER=y - -# Driver interface for Atmel driver -CONFIG_DRIVER_ATMEL=y - -# Driver interface for old Broadcom driver -# Please note that the newer Broadcom driver ("hybrid Linux driver") supports -# Linux wireless extensions and does not need (or even work) with the old -# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. -#CONFIG_DRIVER_BROADCOM=y -# Example path for wlioctl.h; change to match your configuration -#CFLAGS += -I/opt/WRT54GS/release/src/include - -# Driver interface for Intel ipw2100/2200 driver -# Deprecated; use CONFIG_DRIVER_WEXT=y instead. -#CONFIG_DRIVER_IPW=y - -# Driver interface for Ralink driver -#CONFIG_DRIVER_RALINK=y - # Driver interface for generic Linux wireless extensions # Note: WEXT is deprecated in the current Linux kernel version and no new # functionality is added to it. nl80211-based interface is the new @@ -88,6 +31,19 @@ # Driver interface for Linux drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y +# driver_nl80211.c requires libnl. If you are compiling it yourself +# you may need to point hostapd to your version of libnl. +# +#CFLAGS += -I$<path to libnl include files> +#LIBS += -L$<path to libnl library files> + +# Use libnl v2.0 (or 3.0) libraries. +#CONFIG_LIBNL20=y + +# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored) +CONFIG_LIBNL32=y + + # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include @@ -147,10 +103,9 @@ CONFIG_EAP_TTLS=y # EAP-FAST -# Note: Default OpenSSL package does not include support for all the -# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, -# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) -# to add the needed functions. +# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed +# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g., +# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions. CONFIG_EAP_FAST=y # EAP-GTC @@ -179,7 +134,7 @@ # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). # This requires CONFIG_EAP_AKA to be enabled, too. -#CONFIG_EAP_AKA_PRIME=y +CONFIG_EAP_AKA_PRIME=y # Enable USIM simulator (Milenage) for EAP-AKA #CONFIG_USIM_SIMULATOR=y @@ -197,8 +152,6 @@ # Wi-Fi Protected Setup (WPS) CONFIG_WPS=y -# Enable WSC 2.0 support -CONFIG_WPS2=y # Enable WPS external registrar functionality CONFIG_WPS_ER=y # Disable credentials for an open network by default when acting as a WPS @@ -210,6 +163,9 @@ # EAP-IKEv2 CONFIG_EAP_IKEV2=y +# EAP-EKE +#CONFIG_EAP_EKE=y + # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) CONFIG_PKCS12=y @@ -225,14 +181,19 @@ # Support HT overrides (disable HT/HT40, mask MCS rates, etc.) #CONFIG_HT_OVERRIDES=y +# Support VHT overrides (disable VHT, mask MCS rates, etc.) +#CONFIG_VHT_OVERRIDES=y + # Development testing #CONFIG_EAPOL_TEST=y # Select control interface backend for external programs, e.g, wpa_cli: # unix = UNIX domain sockets (default for Linux/*BSD) # udp = UDP sockets using localhost (127.0.0.1) +# udp6 = UDP IPv6 sockets using localhost (::1) # named_pipe = Windows Named Pipe (default for Windows) # udp-remote = UDP sockets with remote access (only for tests systems/purpose) +# udp6-remote = UDP IPv6 sockets with remote access (only for tests purpose) # y = use default (backwards compatibility) # If this option is commented out, control interface is not included in the # build. @@ -258,11 +219,6 @@ # 35-50 kB in code size. #CONFIG_NO_WPA=y -# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to -# save about 1 kB in code size when building only WPA-Personal (no EAP support) -# or 6 kB if building for WPA-Enterprise. -#CONFIG_NO_WPA2=y - # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support # This option can be used to reduce code size by removing support for # converting ASCII passphrases into PSK. If this functionality is removed, the @@ -297,7 +253,7 @@ # main_none = Very basic example (development use only) #CONFIG_MAIN=main -# Select wrapper for operatins system and C library specific functions +# Select wrapper for operating system and C library specific functions # unix = UNIX/POSIX like systems (default) # win32 = Windows systems # none = Empty template @@ -306,12 +262,14 @@ # Select event loop implementation # eloop = select() loop (default) # eloop_win = Windows events and WaitForMultipleObject() loop -# eloop_none = Empty template #CONFIG_ELOOP=eloop # Should we use poll instead of select? Select is used by default. #CONFIG_ELOOP_POLL=y +# Should we use epoll instead of select? Select is used by default. +#CONFIG_ELOOP_EPOLL=y + # Select layer 2 packet implementation # linux = Linux packet socket (default) # pcap = libpcap/libdnet/WinPcap @@ -420,6 +378,10 @@ # same file, e.g., using trace-cmd. #CONFIG_DEBUG_LINUX_TRACING=y +# Add support for writing debug log to Android logcat instead of standard +# output +#CONFIG_ANDROID_LOG=y + # Enable privilege separation (see README 'Privilege separation' for details) #CONFIG_PRIVSEP=y @@ -479,6 +441,10 @@ # IEEE 802.11n (High Throughput) support (mainly for AP mode) CONFIG_IEEE80211N=y +# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode) +# (depends on CONFIG_IEEE80211N) +CONFIG_IEEE80211AC=y + # Wireless Network Management (IEEE Std 802.11v-2011) # Note: This is experimental and not complete implementation. #CONFIG_WNM=y @@ -492,6 +458,9 @@ # Hotspot 2.0 #CONFIG_HS20=y +# Disable roaming in wpa_supplicant +#CONFIG_NO_ROAMING=y + # AP mode operations with wpa_supplicant # This can be used for controlling AP mode operations with wpa_supplicant. It # should be noted that this is mainly aimed at simple cases like @@ -504,9 +473,17 @@ # more information on P2P operations. CONFIG_P2P=y +# Enable TDLS support +CONFIG_TDLS=y + +# Wi-Fi Direct +# This can be used to enable Wi-Fi Direct extensions for P2P using an external +# program to control the additional information exchanges in the messages. +CONFIG_WIFI_DISPLAY=y + # Autoscan # This can be used to enable automatic scan support in wpa_supplicant. -# See wpa_supplicant.conf for more information on autoscan usage. +# See wpa_supplicant.conf for more information on autoscan usage. # # Enabling directly a module will enable autoscan support. # For exponential module: -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
