Hello community, here is the log from the commit of package spice-protocol for openSUSE:Factory checked in at 2014-10-18 09:08:10 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/spice-protocol (Old) and /work/SRC/openSUSE:Factory/.spice-protocol.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "spice-protocol" Changes: -------- --- /work/SRC/openSUSE:Factory/spice-protocol/spice-protocol.changes 2013-07-02 07:46:20.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.spice-protocol.new/spice-protocol.changes 2014-10-18 09:08:12.000000000 +0200 @@ -1,0 +2,7 @@ +Wed Oct 15 11:49:15 UTC 2014 - [email protected] + +- Update to version 0.12.7: + + Add support for Webdav channel. + + Add support for the Opus codec. + +------------------------------------------------------------------- Old: ---- spice-protocol-0.12.6.tar.bz2 New: ---- spice-protocol-0.12.7.tar.bz2 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ spice-protocol.spec ++++++ --- /var/tmp/diff_new_pack.K9qLGa/_old 2014-10-18 09:08:13.000000000 +0200 +++ /var/tmp/diff_new_pack.K9qLGa/_new 2014-10-18 09:08:13.000000000 +0200 @@ -1,7 +1,7 @@ # # spec file for package spice-protocol # -# Copyright (c) 2013 SUSE LINUX Products GmbH, Nuernberg, Germany. +# Copyright (c) 2014 SUSE LINUX Products GmbH, Nuernberg, Germany. # # All modifications and additions to the file contributed by third parties # remain the property of their copyright owners, unless otherwise agreed @@ -17,7 +17,7 @@ Name: spice-protocol -Version: 0.12.6 +Version: 0.12.7 Release: 0 Url: http://www.spice-space.org/ Summary: SPICE-protocol definitions ++++++ spice-protocol-0.12.6.tar.bz2 -> spice-protocol-0.12.7.tar.bz2 ++++++ ++++ 2069 lines of diff (skipped) ++++ retrying with extended exclude list diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/INSTALL new/spice-protocol-0.12.7/INSTALL --- old/spice-protocol-0.12.6/INSTALL 2012-09-26 16:03:18.000000000 +0200 +++ new/spice-protocol-0.12.7/INSTALL 2014-04-17 14:41:37.000000000 +0200 @@ -1,7 +1,7 @@ Installation Instructions ************************* -Copyright (C) 1994-1996, 1999-2002, 2004-2012 Free Software Foundation, +Copyright (C) 1994-1996, 1999-2002, 2004-2013 Free Software Foundation, Inc. Copying and distribution of this file, with or without modification, @@ -12,8 +12,8 @@ Basic Installation ================== - Briefly, the shell commands `./configure; make; make install' should -configure, build, and install this package. The following + Briefly, the shell command `./configure && make && make install' +should configure, build, and install this package. The following more-detailed instructions are generic; see the `README' file for instructions specific to this package. Some packages provide this `INSTALL' file but do not implement all of the features documented diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/NEWS new/spice-protocol-0.12.7/NEWS --- old/spice-protocol-0.12.6/NEWS 2013-06-26 17:24:35.000000000 +0200 +++ new/spice-protocol-0.12.7/NEWS 2014-05-19 11:54:15.000000000 +0200 @@ -1,3 +1,8 @@ +Major changes in 0.12.7 +======================= +* add support for Webdav channel +* add support for the Opus codec + Major changes in 0.12.6 ======================= * add adaptive video streaming support: diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/configure.ac new/spice-protocol-0.12.7/configure.ac --- old/spice-protocol-0.12.6/configure.ac 2013-06-26 17:20:19.000000000 +0200 +++ new/spice-protocol-0.12.7/configure.ac 2014-05-19 11:53:55.000000000 +0200 @@ -2,7 +2,7 @@ m4_define([SPICE_MAJOR], 0) m4_define([SPICE_MINOR], 12) -m4_define([SPICE_MICRO], 6) +m4_define([SPICE_MICRO], 7) AC_INIT(spice-protocol, [SPICE_MAJOR.SPICE_MINOR.SPICE_MICRO], [], spice-protocol) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/missing new/spice-protocol-0.12.7/missing --- old/spice-protocol-0.12.6/missing 2012-09-26 16:03:18.000000000 +0200 +++ new/spice-protocol-0.12.7/missing 2014-04-17 14:41:37.000000000 +0200 @@ -1,10 +1,10 @@ #! /bin/sh -# Common stub for a few missing GNU programs while installing. +# Common wrapper for a few potentially missing GNU programs. -scriptversion=2012-01-06.18; # UTC +scriptversion=2013-10-28.13; # UTC -# Copyright (C) 1996-2012 Free Software Foundation, Inc. -# Originally by Fran,cois Pinard <[email protected]>, 1996. +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# Originally written by Fran,cois Pinard <[email protected]>, 1996. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -29,61 +29,33 @@ exit 1 fi -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, 'missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi +case $1 in -msg="missing on your system" + --is-lightweight) + # Used by our autoconf macros to check whether the available missing + # script is modern enough. + exit 0 + ;; -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; + --run) + # Back-compat with the calling convention used by older automake. + shift + ;; -h|--h|--he|--hel|--help) echo "\ $0 [OPTION]... PROGRAM [ARGUMENT]... -Handle 'PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. +Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due +to PROGRAM being missing or too old. Options: -h, --help display this help and exit -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails Supported PROGRAM values: - aclocal touch file 'aclocal.m4' - autoconf touch file 'configure' - autoheader touch file 'config.h.in' - autom4te touch the output file, or create a stub one - automake touch all 'Makefile.in' files - bison create 'y.tab.[ch]', if possible, from existing .[ch] - flex create 'lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create 'lex.yy.c', if possible, from existing .c - makeinfo touch the output file - yacc create 'y.tab.[ch]', if possible, from existing .[ch] + aclocal autoconf autoheader autom4te automake makeinfo + bison yacc flex lex help2man Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and 'g' are ignored when checking the name. @@ -98,228 +70,141 @@ ;; -*) - echo 1>&2 "$0: Unknown '$1' option" + echo 1>&2 "$0: unknown '$1' option" echo 1>&2 "Try '$0 --help' for more information" exit 1 ;; esac -# normalize program name to check for. -program=`echo "$1" | sed ' - s/^gnu-//; t - s/^gnu//; t - s/^g//; t'` - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). This is about non-GNU programs, so use $1 not -# $program. -case $1 in - lex*|yacc*) - # Not GNU programs, they don't have --version. - ;; +# Run the given program, remember its exit status. +"$@"; st=$? - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running '$TOOL --version' or '$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $program in - aclocal*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'acinclude.m4' or '${configure_ac}'. You might want - to install the Automake and Perl packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified '${configure_ac}'. You might want to install the - Autoconf and GNU m4 packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'acconfig.h' or '${configure_ac}'. You might want - to install the Autoconf and GNU m4 packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; +# If it succeeded, we are done. +test $st -eq 0 && exit 0 - automake*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified 'Makefile.am', 'acinclude.m4' or '${configure_ac}'. - You might want to install the Automake and Perl packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te*) - echo 1>&2 "\ -WARNING: '$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get '$1' as part of Autoconf from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison*|yacc*) - echo 1>&2 "\ -WARNING: '$1' $msg. You should only need it if - you modified a '.y' file. You may need the Bison package - in order for those modifications to take effect. You can get - Bison from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex*|flex*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a '.l' file. You may need the Flex package - in order for those modifications to take effect. You can get - Flex from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG=\${$#} - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - Help2man package in order for those modifications to take - effect. You can get Help2man from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit $? - fi - ;; - - makeinfo*) - echo 1>&2 "\ -WARNING: '$1' is $msg. You should only need it if - you modified a '.texi' or '.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy 'make' (AIX, - DU, IRIX). You might want to install the Texinfo package or - the GNU make package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - *) - echo 1>&2 "\ -WARNING: '$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the 'README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing '$1' program." - exit 1 - ;; -esac +# Also exit now if we it failed (or wasn't found), and '--version' was +# passed; such an option is passed most likely to detect whether the +# program is present and works. +case $2 in --version|--help) exit $st;; esac + +# Exit code 63 means version mismatch. This often happens when the user +# tries to use an ancient version of a tool on a file that requires a +# minimum version. +if test $st -eq 63; then + msg="probably too old" +elif test $st -eq 127; then + # Program was missing. + msg="missing on your system" +else + # Program was found and executed, but failed. Give up. + exit $st +fi -exit 0 +perl_URL=http://www.perl.org/ +flex_URL=http://flex.sourceforge.net/ +gnu_software_URL=http://www.gnu.org/software + +program_details () +{ + case $1 in + aclocal|automake) + echo "The '$1' program is part of the GNU Automake package:" + echo "<$gnu_software_URL/automake>" + echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/autoconf>" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + autoconf|autom4te|autoheader) + echo "The '$1' program is part of the GNU Autoconf package:" + echo "<$gnu_software_URL/autoconf/>" + echo "It also requires GNU m4 and Perl in order to run:" + echo "<$gnu_software_URL/m4/>" + echo "<$perl_URL>" + ;; + esac +} + +give_advice () +{ + # Normalize program name to check for. + normalized_program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + + printf '%s\n' "'$1' is $msg." + + configure_deps="'configure.ac' or m4 files included by 'configure.ac'" + case $normalized_program in + autoconf*) + echo "You should only need it if you modified 'configure.ac'," + echo "or m4 files included by it." + program_details 'autoconf' + ;; + autoheader*) + echo "You should only need it if you modified 'acconfig.h' or" + echo "$configure_deps." + program_details 'autoheader' + ;; + automake*) + echo "You should only need it if you modified 'Makefile.am' or" + echo "$configure_deps." + program_details 'automake' + ;; + aclocal*) + echo "You should only need it if you modified 'acinclude.m4' or" + echo "$configure_deps." + program_details 'aclocal' + ;; + autom4te*) + echo "You might have modified some maintainer files that require" + echo "the 'autom4te' program to be rebuilt." + program_details 'autom4te' + ;; + bison*|yacc*) + echo "You should only need it if you modified a '.y' file." + echo "You may want to install the GNU Bison package:" + echo "<$gnu_software_URL/bison/>" + ;; + lex*|flex*) + echo "You should only need it if you modified a '.l' file." + echo "You may want to install the Fast Lexical Analyzer package:" + echo "<$flex_URL>" + ;; + help2man*) + echo "You should only need it if you modified a dependency" \ + "of a man page." + echo "You may want to install the GNU Help2man package:" + echo "<$gnu_software_URL/help2man/>" + ;; + makeinfo*) + echo "You should only need it if you modified a '.texi' file, or" + echo "any other file indirectly affecting the aspect of the manual." + echo "You might want to install the Texinfo package:" + echo "<$gnu_software_URL/texinfo/>" + echo "The spurious makeinfo call might also be the consequence of" + echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might" + echo "want to install GNU make:" + echo "<$gnu_software_URL/make/>" + ;; + *) + echo "You might have modified some files without having the proper" + echo "tools for further handling them. Check the 'README' file, it" + echo "often tells you about the needed prerequisites for installing" + echo "this package. You may also peek at any GNU archive site, in" + echo "case some other package contains this missing '$1' program." + ;; + esac +} + +give_advice "$1" | sed -e '1s/^/WARNING: /' \ + -e '2,$s/^/ /' >&2 + +# Propagate the correct exit status (expected to be 127 for a program +# not found, 63 for a program that failed due to version mismatch). +exit $st # Local variables: # eval: (add-hook 'write-file-hooks 'time-stamp) diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/spice/enums.h new/spice-protocol-0.12.7/spice/enums.h --- old/spice-protocol-0.12.6/spice/enums.h 2013-06-26 17:16:15.000000000 +0200 +++ new/spice-protocol-0.12.7/spice/enums.h 2014-04-30 22:40:18.000000000 +0200 @@ -1,9 +1,24 @@ /* this is a file autogenerated by spice_codegen.py */ +/* + Copyright (C) 2013 Red Hat, Inc. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, see <http://www.gnu.org/licenses/>. +*/ + #ifndef _H_SPICE_ENUMS #define _H_SPICE_ENUMS -/* Generated from spice.proto, don't edit */ - typedef enum SpiceLinkErr { SPICE_LINK_ERR_OK, SPICE_LINK_ERR_ERROR, @@ -325,6 +340,7 @@ SPICE_AUDIO_DATA_MODE_INVALID, SPICE_AUDIO_DATA_MODE_RAW, SPICE_AUDIO_DATA_MODE_CELT_0_5_1, + SPICE_AUDIO_DATA_MODE_OPUS, SPICE_AUDIO_DATA_MODE_ENUM_END } SpiceAudioDataMode; @@ -376,6 +392,7 @@ SPICE_CHANNEL_SMARTCARD, SPICE_CHANNEL_USBREDIR, SPICE_CHANNEL_PORT, + SPICE_CHANNEL_WEBDAV, SPICE_END_CHANNEL }; @@ -389,6 +406,7 @@ SPICE_MSG_DISCONNECTING, SPICE_MSG_NOTIFY, SPICE_MSG_LIST, + SPICE_MSG_BASE_LAST = 100, }; enum { diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/spice/macros.h new/spice-protocol-0.12.7/spice/macros.h --- old/spice-protocol-0.12.6/spice/macros.h 2013-06-26 17:16:15.000000000 +0200 +++ new/spice-protocol-0.12.7/spice/macros.h 2014-04-30 22:40:18.000000000 +0200 @@ -101,12 +101,6 @@ # define SPICE_END_DECLS #endif -#ifdef __GNUC__ -#define INLINE inline -#else -#define INLINE _inline -#endif /* __GNUC__ */ - #ifndef FALSE #define FALSE (0) #endif diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/spice/protocol.h new/spice-protocol-0.12.7/spice/protocol.h --- old/spice-protocol-0.12.6/spice/protocol.h 2013-06-26 17:16:15.000000000 +0200 +++ new/spice-protocol-0.12.7/spice/protocol.h 2014-04-30 22:40:18.000000000 +0200 @@ -111,11 +111,13 @@ SPICE_PLAYBACK_CAP_CELT_0_5_1, SPICE_PLAYBACK_CAP_VOLUME, SPICE_PLAYBACK_CAP_LATENCY, + SPICE_PLAYBACK_CAP_OPUS, }; enum { SPICE_RECORD_CAP_CELT_0_5_1, SPICE_RECORD_CAP_VOLUME, + SPICE_RECORD_CAP_OPUS, }; enum { diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn' '--exclude=.svnignore' --exclude Makefile.in --exclude configure --exclude config.guess --exclude '*.pot' --exclude mkinstalldirs --exclude aclocal.m4 --exclude config.sub --exclude depcomp --exclude install-sh --exclude ltmain.sh old/spice-protocol-0.12.6/spice/vd_agent.h new/spice-protocol-0.12.7/spice/vd_agent.h --- old/spice-protocol-0.12.6/spice/vd_agent.h 2013-06-26 17:16:15.000000000 +0200 +++ new/spice-protocol-0.12.7/spice/vd_agent.h 2014-04-30 22:40:18.000000000 +0200 @@ -56,8 +56,11 @@ #define VD_AGENT_PROTOCOL 1 #define VD_AGENT_MAX_DATA_SIZE 2048 + +#ifdef SPICE_DEPRECATED #define VD_AGENT_CLIPBOARD_MAX_SIZE_DEFAULT 1024 #define VD_AGENT_CLIPBOARD_MAX_SIZE_ENV "SPICE_CLIPBOARD_MAX_SIZE" +#endif enum { VD_AGENT_MOUSE_STATE = 1, @@ -73,6 +76,7 @@ VD_AGENT_FILE_XFER_STATUS, VD_AGENT_FILE_XFER_DATA, VD_AGENT_CLIENT_DISCONNECTED, + VD_AGENT_MAX_CLIPBOARD, VD_AGENT_END_MESSAGE, }; @@ -198,6 +202,10 @@ #endif } VDAgentClipboardRelease; +typedef struct SPICE_ATTR_PACKED VDAgentMaxClipboard { + int32_t max; +} VDAgentMaxClipboard; + enum { VD_AGENT_CAP_MOUSE_STATE = 0, VD_AGENT_CAP_MONITORS_CONFIG, @@ -209,6 +217,7 @@ VD_AGENT_CAP_SPARSE_MONITORS_CONFIG, VD_AGENT_CAP_GUEST_LINEEND_LF, VD_AGENT_CAP_GUEST_LINEEND_CRLF, + VD_AGENT_CAP_MAX_CLIPBOARD, VD_AGENT_END_CAP, }; -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
