Hello community, here is the log from the commit of package wpa_supplicant for openSUSE:Factory checked in at 2014-10-25 08:32:27 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Comparing /work/SRC/openSUSE:Factory/wpa_supplicant (Old) and /work/SRC/openSUSE:Factory/.wpa_supplicant.new (New) ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "wpa_supplicant" Changes: -------- --- /work/SRC/openSUSE:Factory/wpa_supplicant/wpa_supplicant.changes 2014-09-20 07:26:40.000000000 +0200 +++ /work/SRC/openSUSE:Factory/.wpa_supplicant.new/wpa_supplicant.changes 2014-10-25 08:32:31.000000000 +0200 @@ -1,0 +2,68 @@ +Sat Oct 18 21:08:01 UTC 2014 - [email protected] + +- Update to 2.3 + * fixed number of minor issues identified in static analyzer warnings + * fixed wfd_dev_info to be more careful and not read beyond the buffer + when parsing invalid information for P2P-DEVICE-FOUND + * extended P2P and GAS query operations to support drivers that have + maximum remain-on-channel time below 1000 ms (500 ms is the current + minimum supported value) + * added p2p_search_delay parameter to make the default p2p_find delay + configurable + * improved P2P operating channel selection for various multi-channel + concurrency cases + * fixed some TDLS failure cases to clean up driver state + * fixed dynamic interface addition cases with nl80211 to avoid adding + ifindex values to incorrect interface to skip foreign interface events + properly + * added TDLS workaround for some APs that may add extra data to the + end of a short frame + * fixed EAP-AKA' message parser with multiple AT_KDF attributes + * added configuration option (p2p_passphrase_len) to allow longer + passphrases to be generated for P2P groups + * fixed IBSS channel configuration in some corner cases + * improved HT/VHT/QoS parameter setup for TDLS + * modified D-Bus interface for P2P peers/groups + * started to use constant time comparison for various password and hash + values to reduce possibility of any externally measurable timing + differences + * extended explicit clearing of freed memory and expired keys to avoid + keeping private data in memory longer than necessary + * added optional scan_id parameter to the SCAN command to allow manual + scan requests for active scans for specific configured SSIDs + * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value + * added option to set Hotspot 2.0 Rel 2 update_identifier in network + configuration to support external configuration + * modified Android PNO functionality to send Probe Request frames only + for hidden SSIDs (based on scan_ssid=1) + * added generic mechanism for adding vendor elements into frames at + runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE) + * added fields to show unrecognized vendor elements in P2P_PEER + * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that + MS-CHAP2-Success is required to be present regardless of + eap_workaround configuration + * modified EAP fast session resumption to allow results to be used only + with the same network block that generated them + * extended freq_list configuration to apply for sched_scan as well as + normal scan + * modified WPS to merge mixed-WPA/WPA2 credentials from a single session + * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is + removed from a bridge + * fixed number of small P2P issues to make negotiations more robust in + corner cases + * added experimental support for using temporary, random local MAC + address (mac_addr and preassoc_mac_addr parameters); this is disabled + by default (i.e., previous behavior of using permanent address is + maintained if configuration is not changed) + * added D-Bus interface for setting/clearing WFD IEs + * fixed TDLS AID configuration for VHT + * modified -m<conf> configuration file to be used only for the P2P + non-netdev management device and do not load this for the default + station interface or load the station interface configuration for + the P2P management interface + * fixed external MAC address changes while wpa_supplicant is running + * started to enable HT (if supported by the driver) for IBSS + * fixed wpa_cli action script execution to use more robust mechanism + (CVE-2014-3686) + +------------------------------------------------------------------- Old: ---- wpa_supplicant-2.2.tar.gz New: ---- wpa_supplicant-2.3.tar.gz ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Other differences: ------------------ ++++++ wpa_supplicant.spec ++++++ --- /var/tmp/diff_new_pack.qTS2qu/_old 2014-10-25 08:32:32.000000000 +0200 +++ /var/tmp/diff_new_pack.qTS2qu/_new 2014-10-25 08:32:32.000000000 +0200 @@ -29,7 +29,7 @@ %endif BuildRequires: libnl3-devel Url: http://hostap.epitest.fi/wpa_supplicant/ -Version: 2.2 +Version: 2.3 Release: 0 Summary: WPA supplicant implementation License: BSD-3-Clause and GPL-2.0+ ++++++ wpa_supplicant-2.2.tar.gz -> wpa_supplicant-2.3.tar.gz ++++++ ++++ 20023 lines of diff (skipped) -- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
