Hello community,
here is the log from the commit of package yast2-iscsi-client for
openSUSE:Factory checked in at 2015-07-16 17:17:38
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Comparing /work/SRC/openSUSE:Factory/yast2-iscsi-client (Old)
and /work/SRC/openSUSE:Factory/.yast2-iscsi-client.new (New)
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Package is "yast2-iscsi-client"
Changes:
--------
--- /work/SRC/openSUSE:Factory/yast2-iscsi-client/yast2-iscsi-client.changes
2015-02-08 13:02:39.000000000 +0100
+++
/work/SRC/openSUSE:Factory/.yast2-iscsi-client.new/yast2-iscsi-client.changes
2015-07-16 17:17:39.000000000 +0200
@@ -1,0 +2,9 @@
+Thu Jun 18 14:22:05 CEST 2015 - [email protected]
+
+- warn only once about non-standard initiator name (bsc#926621)
+- improve help text concerning re-discovery of targets and
+ start-up mode (bsc#924502, bsc#924691, bsc#924693) and about
+ authentication settings (bsc#924685)
+- 3.1.22
+
+-------------------------------------------------------------------
Old:
----
yast2-iscsi-client-3.1.21.tar.bz2
New:
----
yast2-iscsi-client-3.1.22.tar.bz2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Other differences:
------------------
++++++ yast2-iscsi-client.spec ++++++
--- /var/tmp/diff_new_pack.TeftUA/_old 2015-07-16 17:17:40.000000000 +0200
+++ /var/tmp/diff_new_pack.TeftUA/_new 2015-07-16 17:17:40.000000000 +0200
@@ -1,7 +1,7 @@
#
# spec file for package yast2-iscsi-client
#
-# Copyright (c) 2015 SUSE LINUX Products GmbH, Nuernberg, Germany.
+# Copyright (c) 2015 SUSE LINUX GmbH, Nuernberg, Germany.
#
# All modifications and additions to the file contributed by third parties
# remain the property of their copyright owners, unless otherwise agreed
@@ -17,7 +17,7 @@
Name: yast2-iscsi-client
-Version: 3.1.21
+Version: 3.1.22
Release: 0
BuildRoot: %{_tmppath}/%{name}-%{version}-build
++++++ yast2-iscsi-client-3.1.21.tar.bz2 -> yast2-iscsi-client-3.1.22.tar.bz2
++++++
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore' old/yast2-iscsi-client-3.1.21/CONTRIBUTING.md
new/yast2-iscsi-client-3.1.22/CONTRIBUTING.md
--- old/yast2-iscsi-client-3.1.21/CONTRIBUTING.md 2015-02-06
14:43:26.000000000 +0100
+++ new/yast2-iscsi-client-3.1.22/CONTRIBUTING.md 2015-07-01
11:37:38.000000000 +0200
@@ -12,13 +12,13 @@
-----------
If you find a problem, please report it either using
-[Bugzilla](https://bugzilla.novell.com/enter_bug.cgi?format=guided&product=openSUSE+Factory&component=YaST2)
+[Bugzilla](https://bugzilla.suse.com/enter_bug.cgi?format=guided&product=openSUSE+Factory&component=YaST2)
or [GitHub issues](../../issues). (For Bugzilla, use the [simplified
registration](https://secure-www.novell.com/selfreg/jsp/createSimpleAccount.jsp)
if you don't have an account yet.)
If you find a problem, please report it either using
-[Bugzilla](https://bugzilla.novell.com/) or GitHub issues. We can't guarantee
+[Bugzilla](https://bugzilla.suse.com/) or GitHub issues. We can't guarantee
that every bug will be fixed, but we'll try.
When creating a bug report, please follow our [bug reporting
@@ -71,7 +71,7 @@
[widely used
conventions](http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html).
-If your commit is related to a bug in Buzgilla or an issue on GitHub, make sure
+If your commit is related to a bug in Bugzilla or an issue on GitHub, make sure
you mention it in the commit message for cross-reference. Use format like
bnc#775814 or gh#yast/yast-foo#42. See also [GitHub
autolinking](https://help.github.com/articles/github-flavored-markdown#references)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/yast2-iscsi-client-3.1.21/package/yast2-iscsi-client.changes
new/yast2-iscsi-client-3.1.22/package/yast2-iscsi-client.changes
--- old/yast2-iscsi-client-3.1.21/package/yast2-iscsi-client.changes
2015-02-06 14:43:26.000000000 +0100
+++ new/yast2-iscsi-client-3.1.22/package/yast2-iscsi-client.changes
2015-07-01 11:37:38.000000000 +0200
@@ -1,4 +1,13 @@
-------------------------------------------------------------------
+Thu Jun 18 14:22:05 CEST 2015 - [email protected]
+
+- warn only once about non-standard initiator name (bsc#926621)
+- improve help text concerning re-discovery of targets and
+ start-up mode (bsc#924502, bsc#924691, bsc#924693) and about
+ authentication settings (bsc#924685)
+- 3.1.22
+
+-------------------------------------------------------------------
Fri Feb 6 13:02:45 UTC 2015 - [email protected]
- The unit tests are now compatible with RSpec 3 (bnc#916364)
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/yast2-iscsi-client-3.1.21/package/yast2-iscsi-client.spec
new/yast2-iscsi-client-3.1.22/package/yast2-iscsi-client.spec
--- old/yast2-iscsi-client-3.1.21/package/yast2-iscsi-client.spec
2015-02-06 14:43:26.000000000 +0100
+++ new/yast2-iscsi-client-3.1.22/package/yast2-iscsi-client.spec
2015-07-01 11:37:38.000000000 +0200
@@ -17,7 +17,7 @@
Name: yast2-iscsi-client
-Version: 3.1.21
+Version: 3.1.22
Release: 0
BuildRoot: %{_tmppath}/%{name}-%{version}-build
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/yast2-iscsi-client-3.1.21/src/include/iscsi-client/helps.rb
new/yast2-iscsi-client-3.1.22/src/include/iscsi-client/helps.rb
--- old/yast2-iscsi-client-3.1.21/src/include/iscsi-client/helps.rb
2015-02-06 14:43:26.000000000 +0100
+++ new/yast2-iscsi-client-3.1.22/src/include/iscsi-client/helps.rb
2015-07-01 11:37:38.000000000 +0200
@@ -88,9 +88,12 @@
),
# table of connected targets
"server_table" => _(
- "List of current sessions. To add a new target, select it and press
<b>Add</b>.\n" +
- "To remove it, press <b>Log Out</b>.\n" +
- "To change the start-up status, press <b>Toggle</b>.\n"
+ "<p>List of current sessions.</p>" \
+ "<p>Use the <b>Add</b> button to get additional targets. A
discovery is started to " \
+ "detect new targets and the start-up mode of already connected
targets keeps " \
+ "unchanged.<br>" \
+ "Use <b>Log Out</b> to cancel the connection and with it remove
the target from the list.<br>" \
+ "To change the start-up status, press <b>Edit</b>.</p>"
) +
# Warning
_("<h1>Warning</h1>") +
@@ -98,7 +101,7 @@
"<p>When accessing an iSCSI device <b>READ</b>/<b>WRITE</b>, make
sure that this access is exclusive. Otherwise there is a potential risk of data
corruption.</p>\n"
),
"initiator_name" => _(
- "<p><b>InitiatorName</b> is a value from
<tt>/etc/iscsi/initiatorname.iscsi</tt>. \nIn case you have iBFT, this value
will be added from there and you are only able to change it in the BIOS
setup.</p>"
+ "<p><b>Initiator Name</b> is a value from
<tt>/etc/iscsi/initiatorname.iscsi</tt>. \nIn case you have iBFT, this value
will be added from there and you are only able to change it in the BIOS
setup.</p>"
),
"isns" => _(
"If you want to use <b>iSNS</b> (Internet Storage Name Service)
for discovering targets instead of the default SendTargets method,\nfill in the
IP address of the iSNS server and port. The default port should be 3205.\n"
@@ -106,7 +109,7 @@
# discovery new target
"discovery" => _("<h1>iSCSI Initiator</h1>") +
_(
- "Enter the <b>IP Address</b> of the discovered server.\n" +
+ "Enter the <b>IP Address</b> of the iSCSI target server.\n" +
"Only change <b>Port</b> if needed. For authentication, use
<b>Username</b> and <b>Password</b>. If you do not need authentication,\n" +
"select <b>No Authentication</b>.\n"
) +
@@ -126,9 +129,6 @@
"conn_auth" => _(
"<h1>iSCSI Initiator</h1>"
) +
- _(
- "Select the type of authentication and enter the <b>Username</b>
and <b>Password</b>."
- ) +
_("<h1>Startup</h1>") +
_(
"<p><b>manual</b> is for iSCSI targets which are not to be
connected by\n" +
@@ -137,10 +137,32 @@
"root is on iSCSI. As such it will be evaluated by the
initrd.</p>\n" +
"<p><b>automatic</b> is for iSCSI targets to be connected when
the iSCSI service\n" +
"starts up.</p>\n"
+ ) +
+ _("<h1>Authentication</h1>") +
+ _(
+ "<p>The default setting here is <i>No Authentication</i>. Uncheck
the checkbox if " \
+ "authentication is needed for security reasons. Enter
<b>Username</b> and <b>Password</b> " \
+ "for 'Incoming Authentication', 'Outgoing Authentication' or for
both.</p>" \
+ "<p><b>Please note:</b><br>" \
+ "'Incoming Authentication' here correlates to 'Outgoing
Authentication' "\
+ "on iSCSI target server side and the other way round.</p>"
),
# list of discovered targets
"discovered" => _(
- "List of discovered targets. Start a new <b>Discovery</b> or
<b>Connect</b> to any target."
+ "<p>This screen shows the list of discovered targets.</p>" \
+ "<p>Use the <b>Discovery</b> button to get available iSCSI targets "
\
+ "from a server specified by IP address.<br>" \
+ "<b>Log In</b> to a target to establih the connection. If login was
successful " \
+ "the column <i>Connected</i> shows status 'True' and the target will
appear on " \
+ "the <i>Connected Targets</i> screen.<br>" \
+ "To remove a target use the <b>Delete</b> button.<br> <b>Hint:</b> "
\
+ "Removing of targets is only possible for not connected onces. " \
+ "If required, <b>Log Out</b> at <i>Connected Targets</i> first.</p>"
\
+ "<p><b>Please note:</b> Starting the <b>Discovery</b> again means
doing a re-discovery " \
+ "of targets which possibly will change the start-up mode of already
connected targets " \
+ "(to default 'manual'). " \
+ "Switch to <i>Connected Targets</i> screen and use the <b>Add</b>
button if you want " \
+ "to add new targets without changing the start-up mode.</p>"
),
"ibft_table" => _("<h1>iBTF</h1>") +
"The <p>iSCSI Boot Firmware Table</p> is a table created by the
iSCSI boot firmware in order to\npass parameters about the iSCSI boot device to
the loaded OS."
diff -urN '--exclude=CVS' '--exclude=.cvsignore' '--exclude=.svn'
'--exclude=.svnignore'
old/yast2-iscsi-client-3.1.21/src/include/iscsi-client/widgets.rb
new/yast2-iscsi-client-3.1.22/src/include/iscsi-client/widgets.rb
--- old/yast2-iscsi-client-3.1.21/src/include/iscsi-client/widgets.rb
2015-02-06 14:43:26.000000000 +0100
+++ new/yast2-iscsi-client-3.1.22/src/include/iscsi-client/widgets.rb
2015-07-01 11:37:38.000000000 +0200
@@ -407,6 +407,12 @@
# is freely selectable. For further details please check the iSCSI spec.
i_name = Convert.to_string(UI.QueryWidget(:initiator_name, :Value))
+
+ # name not changed at all or already saved after checking it
+ if IscsiClientLib.initiatorname == i_name
+ return true
+ end
+
# regexp for "yyyy-mm."
reg1 = "[[:digit:]]{4}-[[:digit:]]{2}."
# regexp for "cz.suse" or just "suse", "cz.su-se"
@@ -419,18 +425,20 @@
Builtins.regexpmatch(i_name, Builtins.sformat("^eui.%1%2$", reg1,
reg2))
if !correct
- continue = Popup.ContinueCancel(
+ go_on = Popup.YesNoHeadline( _("Incorrect Initiator Name"),
_(
- "Incorrect InitiatorName.\n" +
- "The correct syntax is\n" +
- "iqn.yyyy-mm.reversed.domain.name[:identifier]\n" +
- "or eui.yyyy-mm.reversed.domain.name[:identifier]\n" +
- "\n" +
- "Example:\n" +
- "iqn.2007-04.cz.server:storage.disk.sdb\n"
+ "\n" +
+ "The correct syntax is\n" +
+ "iqn.yyyy-mm.reversed.domain.name[:identifier]\n" +
+ "or eui.yyyy-mm.reversed.domain.name[:identifier]\n" +
+ "\n" +
+ "Example:\n" +
+ "iqn.2007-04.cz.server:storage.disk.sdb\n" +
+ "\n" +
+ "Do you want to use the name?\n"
)
)
- return continue
+ return go_on
else
return true
end
