Attention is currently required from: plaisthos.
Hello plaisthos,
I'd like you to reexamine a change. Please visit
http://gerrit.openvpn.net/c/openvpn/+/558?usp=email
to look at the new patch set (#2).
Change subject: configure: update old copy of pkg.m4
......................................................................
configure: update old copy of pkg.m4
If we copy this code, let's at least make sure we update
it every decade ;)
I also considered removing it. However, then autoconf
can't be run on systems without pkg-config installed
anymore. While that is very unusual, didn't see a good
reason to break that.
Change-Id: I34e96a225446693f401549d86d872c02427ef7d5
Signed-off-by: Frank Lichtenheld <fr...@lichtenheld.com>
---
M m4/pkg.m4
1 file changed, 173 insertions(+), 57 deletions(-)
git pull ssh://gerrit.openvpn.net:29418/openvpn refs/changes/58/558/2
diff --git a/m4/pkg.m4 b/m4/pkg.m4
index cca47a7..13a8890 100644
--- a/m4/pkg.m4
+++ b/m4/pkg.m4
@@ -1,29 +1,60 @@
-# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
-# serial 1 (pkg-config-0.24)
-#
-# Copyright © 2004 Scott James Remnant <sc...@netsplit.com>.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*-
+# serial 12 (pkg-config-0.29.2)
-# PKG_PROG_PKG_CONFIG([MIN-VERSION])
-# ----------------------------------
+dnl Copyright © 2004 Scott James Remnant <sc...@netsplit.com>.
+dnl Copyright © 2012-2015 Dan Nicholson <dbn.li...@gmail.com>
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+dnl 02111-1307, USA.
+dnl
+dnl As a special exception to the GNU General Public License, if you
+dnl distribute this file as part of a program that contains a
+dnl configuration script generated by Autoconf, you may include it under
+dnl the same distribution terms that you use for the rest of that
+dnl program.
+
+dnl PKG_PREREQ(MIN-VERSION)
+dnl -----------------------
+dnl Since: 0.29
+dnl
+dnl Verify that the version of the pkg-config macros are at least
+dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's
+dnl installed version of pkg-config, this checks the developer's version
+dnl of pkg.m4 when generating configure.
+dnl
+dnl To ensure that this macro is defined, also add:
+dnl m4_ifndef([PKG_PREREQ],
+dnl [m4_fatal([must install pkg-config 0.29 or later before running
autoconf/autogen])])
+dnl
+dnl See the "Since" comment for each macro you use to see what version
+dnl of the macros you require.
+m4_defun([PKG_PREREQ],
+[m4_define([PKG_MACROS_VERSION], [0.29.2])
+m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1,
+ [m4_fatal([pkg.m4 version $1 or higher is required but
]PKG_MACROS_VERSION[ found])])
+])dnl PKG_PREREQ
+
+dnl PKG_PROG_PKG_CONFIG([MIN-VERSION])
+dnl ----------------------------------
+dnl Since: 0.16
+dnl
+dnl Search for the pkg-config tool and set the PKG_CONFIG variable to
+dnl first found in the path. Checks that the version of pkg-config found
+dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is
+dnl used since that's the first version where most current features of
+dnl pkg-config existed.
AC_DEFUN([PKG_PROG_PKG_CONFIG],
[m4_pattern_forbid([^_?PKG_[A-Z_]+$])
m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$])
@@ -45,18 +76,19 @@
PKG_CONFIG=""
fi
fi[]dnl
-])# PKG_PROG_PKG_CONFIG
+])dnl PKG_PROG_PKG_CONFIG
-# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
-#
-# Check to see whether a particular set of modules exists. Similar
-# to PKG_CHECK_MODULES(), but does not set variables or print errors.
-#
-# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
-# only at the first occurrence in configure.ac, so if the first place
-# it's called might be skipped (such as if it is within an "if", you
-# have to call PKG_CHECK_EXISTS manually
-# --------------------------------------------------------------
+dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------------------------------
+dnl Since: 0.18
+dnl
+dnl Check to see whether a particular set of modules exists. Similar to
+dnl PKG_CHECK_MODULES(), but does not set variables or print errors.
+dnl
+dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG])
+dnl only at the first occurence in configure.ac, so if the first place
+dnl it's called might be skipped (such as if it is within an "if", you
+dnl have to call PKG_CHECK_EXISTS manually
AC_DEFUN([PKG_CHECK_EXISTS],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
if test -n "$PKG_CONFIG" && \
@@ -66,8 +98,10 @@
$3])dnl
fi])
-# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
-# ---------------------------------------------
+dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES])
+dnl ---------------------------------------------
+dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting
+dnl pkg_failed based on the result.
m4_define([_PKG_CONFIG],
[if test -n "$$1"; then
pkg_cv_[]$1="$$1"
@@ -79,10 +113,11 @@
else
pkg_failed=untried
fi[]dnl
-])# _PKG_CONFIG
+])dnl _PKG_CONFIG
-# _PKG_SHORT_ERRORS_SUPPORTED
-# -----------------------------
+dnl _PKG_SHORT_ERRORS_SUPPORTED
+dnl ---------------------------
+dnl Internal check to see if pkg-config supports short errors.
AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])
if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
@@ -90,26 +125,24 @@
else
_pkg_short_errors_supported=no
fi[]dnl
-])# _PKG_SHORT_ERRORS_SUPPORTED
+])dnl _PKG_SHORT_ERRORS_SUPPORTED
-# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
-# [ACTION-IF-NOT-FOUND])
-#
-#
-# Note that if there is a possibility the first call to
-# PKG_CHECK_MODULES might not happen, you should be sure to include an
-# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
-#
-#
-# --------------------------------------------------------------
+dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl --------------------------------------------------------------
+dnl Since: 0.4.0
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES might not happen, you should be sure to include an
+dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac
AC_DEFUN([PKG_CHECK_MODULES],
[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl
AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl
pkg_failed=no
-AC_MSG_CHECKING([for $1])
+AC_MSG_CHECKING([for $2])
_PKG_CONFIG([$1][_CFLAGS], [cflags], [$2])
_PKG_CONFIG([$1][_LIBS], [libs], [$2])
@@ -119,11 +152,11 @@
See the pkg-config man page for more details.])
if test $pkg_failed = yes; then
- AC_MSG_RESULT([no])
+ AC_MSG_RESULT([no])
_PKG_SHORT_ERRORS_SUPPORTED
if test $_pkg_short_errors_supported = yes; then
$1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors
--cflags --libs "$2" 2>&1`
- else
+ else
$1[]_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs
"$2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
@@ -140,7 +173,7 @@
_PKG_TEXT])[]dnl
])
elif test $pkg_failed = untried; then
- AC_MSG_RESULT([no])
+ AC_MSG_RESULT([no])
m4_default([$4], [AC_MSG_FAILURE(
[The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
@@ -156,4 +189,87 @@
AC_MSG_RESULT([yes])
$3
fi[]dnl
-])# PKG_CHECK_MODULES
+])dnl PKG_CHECK_MODULES
+
+
+dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND],
+dnl [ACTION-IF-NOT-FOUND])
+dnl ---------------------------------------------------------------------
+dnl Since: 0.29
+dnl
+dnl Checks for existence of MODULES and gathers its build flags with
+dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags
+dnl and VARIABLE-PREFIX_LIBS from --libs.
+dnl
+dnl Note that if there is a possibility the first call to
+dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to
+dnl include an explicit call to PKG_PROG_PKG_CONFIG in your
+dnl configure.ac.
+AC_DEFUN([PKG_CHECK_MODULES_STATIC],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+_save_PKG_CONFIG=$PKG_CONFIG
+PKG_CONFIG="$PKG_CONFIG --static"
+PKG_CHECK_MODULES($@)
+PKG_CONFIG=$_save_PKG_CONFIG[]dnl
+])dnl PKG_CHECK_MODULES_STATIC
+
+
+dnl PKG_INSTALLDIR([DIRECTORY])
+dnl -------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable pkgconfigdir as the location where a module
+dnl should install pkg-config .pc files. By default the directory is
+dnl $libdir/pkgconfig, but the default can be changed by passing
+dnl DIRECTORY. The user can override through the --with-pkgconfigdir
+dnl parameter.
+AC_DEFUN([PKG_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([pkgconfigdir],
+ [AS_HELP_STRING([--with-pkgconfigdir], pkg_description)],,
+ [with_pkgconfigdir=]pkg_default)
+AC_SUBST([pkgconfigdir], [$with_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_INSTALLDIR
+
+
+dnl PKG_NOARCH_INSTALLDIR([DIRECTORY])
+dnl --------------------------------
+dnl Since: 0.27
+dnl
+dnl Substitutes the variable noarch_pkgconfigdir as the location where a
+dnl module should install arch-independent pkg-config .pc files. By
+dnl default the directory is $datadir/pkgconfig, but the default can be
+dnl changed by passing DIRECTORY. The user can override through the
+dnl --with-noarch-pkgconfigdir parameter.
+AC_DEFUN([PKG_NOARCH_INSTALLDIR],
+[m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])])
+m4_pushdef([pkg_description],
+ [pkg-config arch-independent installation directory @<:@]pkg_default[@:>@])
+AC_ARG_WITH([noarch-pkgconfigdir],
+ [AS_HELP_STRING([--with-noarch-pkgconfigdir], pkg_description)],,
+ [with_noarch_pkgconfigdir=]pkg_default)
+AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir])
+m4_popdef([pkg_default])
+m4_popdef([pkg_description])
+])dnl PKG_NOARCH_INSTALLDIR
+
+
+dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE,
+dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND])
+dnl -------------------------------------------
+dnl Since: 0.28
+dnl
+dnl Retrieves the value of the pkg-config variable for the given module.
+AC_DEFUN([PKG_CHECK_VAR],
+[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl
+AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl
+
+_PKG_CONFIG([$1], [variable="][$3]["], [$2])
+AS_VAR_COPY([$1], [pkg_cv_][$1])
+
+AS_VAR_IF([$1], [""], [$5], [$4])dnl
+])dnl PKG_CHECK_VAR
--
To view, visit http://gerrit.openvpn.net/c/openvpn/+/558?usp=email
To unsubscribe, or for help writing mail filters, visit
http://gerrit.openvpn.net/settings
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I34e96a225446693f401549d86d872c02427ef7d5
Gerrit-Change-Number: 558
Gerrit-PatchSet: 2
Gerrit-Owner: flichtenheld <fr...@lichtenheld.com>
Gerrit-Reviewer: plaisthos <arne-open...@rfc2549.org>
Gerrit-CC: openvpn-devel <openvpn-devel@lists.sourceforge.net>
Gerrit-Attention: plaisthos <arne-open...@rfc2549.org>
Gerrit-MessageType: newpatchset
_______________________________________________
Openvpn-devel mailing list
Openvpn-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
