Hi List, we are installing Oscar 5.0 on Suse 10.0. We did everything successfully until step 6. Now we try to install the clients with pxeboot. Everything works fine until the client tries to get the IP Address again from the DHCP Server:
logfile Oscar-Server: Nov 27 10:26:08 abakus dhcpd: DHCPDISCOVER from 00:30:48:21:e4:b9 via eth0 Nov 27 10:26:08 abakus dhcpd: DHCPOFFER on 10.7.11.1 to 00:30:48:21:e4:b9 via eth0 Nov 27 10:26:24 abakus dhcpd: DHCPREQUEST for 10.7.11.1 (10.7.11.254) from 00:30:48:21:e4:b9 via eth0 Nov 27 10:26:24 abakus dhcpd: DHCPACK on 10.7.11.1 to 00:30:48:21:e4:b9 via eth0 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.0 to 10.7.11.1:2070 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.0 to 10.7.11.1:2071 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/01-00-30-48-21-e4-b9 to 10.7.11.1:57089 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A070B01 to 10.7.11.1:57090 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A070B0 to 10.7.11.1:57091 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A070B to 10.7.11.1:57092 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A070 to 10.7.11.1:57093 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A07 to 10.7.11.1:57094 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A0 to 10.7.11.1:57095 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0A to 10.7.11.1:57096 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/0 to 10.7.11.1:57097 Nov 27 10:26:24 abakus atftpd[5421]: Serving pxelinux.cfg/default to 10.7.11.1:57098 Nov 27 10:26:24 abakus atftpd[5421]: Serving message.txt to 10.7.11.1:57099 Nov 27 10:26:29 abakus atftpd[5421]: Serving kernel to 10.7.11.1:57100 Nov 27 10:26:30 abakus atftpd[5421]: Serving initrd.img to 10.7.11.1:57101 Nov 27 10:27:10 abakus dhcpd: DHCPDISCOVER from 00:30:48:21:e4:b9 via eth0 Nov 27 10:27:10 abakus dhcpd: DHCPOFFER on 10.7.11.1 to 00:30:48:21:e4:b9 via eth0 this is what the client tells: start_network IP Address not set with pre-boot settings. sleep 0: This is to give your switch (if you're using one) time to recognize your ethernet card before we try the network. Tip: You can use <ctrl> + <c> to pass the time (pun intended). Listening on LPF/eth0/<null> Sending on LPF/eth0/<null> DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 2 NO DHCPOFFERS received. No working leases in persistent database - sleeping. I couldn't configure the network interface using DHCP. /my_modules # nc: connect: Network is unreachable we are wondering why the image hasn´t the module for the networkcard. It should be eepro100, which is configured on the server automatically. We do not know how to check whether the module is included or not in the image. It is not possible to load the module on the client with insmod. Any ideas? regards, Sylvia ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Oscar-users mailing list Oscar-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/oscar-users
