Hello, I have a DS2413 attached to a serial master DS9097U-E25 with owfs-2.5p1 . On power-on both PIO.A and PIO.B read 1. Any attempt to write to PIO.A, PIO.B, PIO.ALL, or PIO.BYTE is just ignored (LEDs are attached for monitoring). If the value of e.g. PIO.A is read back immediately after being written, the data is garbled:
echo 0 > /mnt/1wire/3A.7C3100000000/PIO.A; cat /mnt/1wire/3A.7C3100000000/PIO.A 2Ùæ§HÙæ§cat: /mnt/1wire/3A.7C3100000000/PIO.A: Numerical result out of range and after waiting for a couple of seconds PIO.A reads 1 again. Has anyone a functioning DS2413 switch? Is this likely to be a software or rather a hardware error? Other sensors (temperature) on the same bus are operating normally. Regards, Christoph -- Christoph Scheurer GnuPG key Id: 0x6128C6B6 ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
