Paul Alfille schreef: > We have a feature that isn't fully implemented or tested called > --one_device. > > The idea is that only one device is on that bus, so after the initial > discovery, much faster techniques can be used to access the slave. > UIsing that an a dedicated bus master for each rpm sensor could get you > near your goal.
That sounds quite good, I will give that a try later this year when I start with the readings in C. At the moment I have a bash script reading (which takes little over 1sec. to poll the 6 sensors) do some calculations and put it in mysql so for the time being the logged info is enough, first get the tractor running again... (remodeling our commonrail setup, some lathe work, some work on the lubrication etc...) One thing remaining do, is there a way to reset the counters after every reading? When running at full rpm the counters will count ~250-300 pulses per second so after 1 hour (including heating up and so) they will contain some large numbers. ------------------------------------------------------------------------------ _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
