Ok, so the current problem is that you get many "reconnects" in the log?
Paul
On Wed, Jan 14, 2009 at 8:00 AM, Michael Markstaller <[email protected]> wrote:
> Paul,
>
> just to make sure, I mentioned the w1 driver only to state clearly that I
> don't currently use it (blacklisted), so in my case it's definitely not
> loaded or used.
>
> regards Michael
>
> > -----Original Message-----
> > From: Paul Alfille [mailto:[email protected]]
> > Sent: Wednesday, January 14, 2009 12:47 PM
> > To: [email protected]
> > Subject: Re: [Owfs-developers] Problem with DS9490R on longer networks
> >
> > w1 is the linux kernel system for 1-wire. It grabs certain of
> > the bus masters (the USB one in particular). As root, OWFS
> > will unload the ds2490 kernel module and use libusb to
> > connect. You can unload it yourself, or suppress it's loading
> > with udev magic.
> >
> > That actually might be part of the problem, and an
> > interesting issue. Perhaps the USB line is getting reset (bad
> > connection, other error, ...) Although owfs tries to
> > reconnect to the DS490, it doesn't try unloading the module
> > again. I'll investigate.
> >
> > Note that we are nearly done building the owfs-w1 bridge
> > which will make using w1 as a bus master possible.
> >
> > Paul Alfille
> >
> >
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword
> _______________________________________________
> Owfs-developers mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/owfs-developers
>
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
