I would have to use different relays for that though, right??
----- Original Message -----
From: "Mark Marsh" <[email protected]>
To: [email protected]
Sent: Saturday, January 31, 2009 7:05:38 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Owfs-developers] Controlling normal Electrical Outlet
Have a look at the schematics on the hobby boards site - they're for a 2408 (8
i/o pins) but the basic idea holds for the 2 i/o pin chips.
On Sat, Jan 31, 2009 at 11:28 PM, Donald J. Organ IV < [email protected] >
wrote:
I am assuming that using a one wire chip and the correct relay I could control
a standard outlet correct? If so how would I go about doing this?
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
This SF.net email is sponsored by: SourcForge Community SourceForge wants to
tell your story. http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________ Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
