Hi all,
Having problems setting up - I'd be grateful for a pointer or two in the
correct direction...
Brand new LinkUSB interface:
dmesg
usb 3-2:1.0: uevent
usbserial_generic 3-2:1.0: usb_probe_interface
usbserial_generic 3-2:1.0: usb_probe_interface - got id
ftdi_sio 3-2:1.0: usb_probe_interface
ftdi_sio 3-2:1.0: usb_probe_interface - got id
ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
usb 3-2: Detected FT232RL
usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
drivers/usb/core/inode.c: creating file '008'
usb 3-2: New USB device found, idVendor=0403, idProduct=6001
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2: Product: FT232R USB UART
usb 3-2: Manufacturer: FTDI
usb 3-2: SerialNumber: A800aZxd
However, I cannot connect to it.
Permissions are OK, i believe...
ls -la /dev/ttyUSB0
crwxrwxrwx 1 root uucp 188, 0 2010-05-25 11:08 /dev/ttyUSB0
The following is the response I get when attempting to start the server.
What am I failing to do?
owserver -s 127.0.0.1:4304 --link=/dev/ttyUSB0 --foreground --error_level 5
CALL: ow_parsename.c:FS_ParsedName_anywhere(109) path=[]
DEBUG: owlib.c:SetupTemperatureLimits(83) Globals temp limits 0C 100C
(for simulated adapters)
CALL: ow_parsename.c:FS_ParsedName_anywhere(109) path=[]
DEBUG: ow_link.c:LINK_reset(204) ok, devices Not present
DEBUG: ow_link.c:LINK_detect(99) Checking LINK version
CONNECT: ow_com_read.c:COM_read(72) Timeout error (read) serial port:
/dev/ttyUSB0
DEFAULT: ow_link.c:LINK_detect(124) LINK detection error
CONNECT: owlib.c:SetupInboundConnections(174) Cannot open LINK adapter at
/dev/ttyUSB0
DEBUG: ow_com.c:COM_close(80) COM_close: flush
DEBUG: ow_com.c:COM_close(82) COM_close: restore
DEBUG: ow_com.c:COM_close(86) COM_close: close
DEBUG: owserver.c:main(158) main_threadid = 3084814016
DEBUG: ow_net_server.c:ServerProcess(320) Wait for output device 0 to
setup.
DEBUG: ow_net_server.c:ServerProcessOut(252) 3084811152
DEBUG: ow_net_server.c:ServerProcessOut(272) Output device setup is
done. index=0
DEBUG: ow_net_server.c:ServerProcessAccept(189) [3084811152] try lock 0
DEBUG: ow_net_server.c:ServerProcessAccept(195) [3084811152] locked 0
DEBUG: ow_net_server.c:ServerProcess(323) Output device 0 setup done.
owserver -s 127.0.0.1:4304 -d /dev/ttyUSB0 --foreground --error_level 5
CALL: ow_parsename.c:FS_ParsedName_anywhere(109) path=[]
DEBUG: owlib.c:SetupTemperatureLimits(83) Globals temp limits 0C 100C
(for simulated adapters)
CALL: ow_parsename.c:FS_ParsedName_anywhere(109) path=[]
DEBUG: ow_ds9097U.c:DS2480_configuration_read(366) wrong response (70
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(381) Failed first attempt
at resetting baud rate of bus master /dev/ttyUSB0
DEBUG: ow_ds9097U.c:DS2480_configuration_read(366) wrong response (70
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(386) Failed second attempt
at resetting baud rate of bus master /dev/ttyUSB0
CONNECT: ow_bus.c:BUS_reset(175) 1-wire bus short circuit.
DEBUG: ow_ds9097U.c:DS2480_configuration_read(366) wrong response (70
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(381) Failed first attempt
at resetting baud rate of bus master /dev/ttyUSB0
DEBUG: ow_ds9097U.c:DS2480_configuration_read(366) wrong response (70
not 00)
DEBUG: ow_ds9097U.c:DS2480_set_baud_control(386) Failed second attempt
at resetting baud rate of bus master /dev/ttyUSB0
CONNECT: ow_bus.c:BUS_reset(175) 1-wire bus short circuit.
DEBUG: ow_ds9097U.c:DS2480_configuration_write(348) wrong response (DF
not 44)
CONNECT: owlib.c:SetupInboundConnections(110) Cannot detect DS2480 or
LINK interface on /dev/ttyUSB0.
DEBUG: ow_com.c:COM_close(80) COM_close: flush
DEBUG: ow_com.c:COM_close(82) COM_close: restore
DEBUG: ow_com.c:COM_close(86) COM_close: close
CALL: ow_parsename.c:FS_ParsedName_anywhere(109) path=[]
DEBUG: owserver.c:main(158) main_threadid = 3083818688
DEBUG: ow_net_server.c:ServerProcessOut(252) 3083815824
DEBUG: ow_net_server.c:ServerProcess(320) Wait for output device 0 to
setup.
DEBUG: ow_net_server.c:ServerProcessOut(272) Output device setup is
done. index=0
DEBUG: ow_net_server.c:ServerProcessAccept(189) [3083815824] try lock 0
DEBUG: ow_net_server.c:ServerProcessAccept(195) [3083815824] locked 0
DEBUG: ow_net_server.c:ServerProcess(323) Output device 0 setup done.
Many thanks,
Phil
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/owfs-developers
