Hi all, I have several pressure sensors connected to a DS2450 each. Now I'm monitoring the measured pressure and sometimes I see pressure jumps. Before each pressure jump, the sensor stucks and then jumps to a higher value. To ensure that it is not the sensor, which causes this trouble, I sourced the same input of the ADC with a voltage source, and measured voltage against the applied voltage. There I see the same voltage jump at 2.56V. This seems to be the switch in the reference voltage.
Is it possible to set the reference, the ADC should use? Cheers, Jochen ------------------------------------------------------------------------------ Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ Owfs-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/owfs-developers
