Paul,
here are the log messages (level 2) when the config file has
device = /dev/i2c-2:ALL
Jun 10 11:00:47 mmaster OWFS[21352]: DEFAULT: ow_arg.c:(84) Cannot
access device /dev/i2c-2:ALL
Jun 10 11:02:16 mmaster OWFS[689]: DEFAULT: ow_arg.c:(84) Cannot access
device /dev/i2c-2:ALL
When I put --i2c=/dev/i2c-2:ALL on the command line, it works.
jerry
On 06/13/2015 08:14 AM, Paul Alfille wrote:
So is the problem the parsing of the line in the config file?
On Wed, Jun 10, 2015 at 2:42 PM, Jerry Scharf
<sch...@lagunawayconsulting.com
<mailto:sch...@lagunawayconsulting.com>> wrote:
Don't you hate it when someone replies to them selves on the list.
I was
trying to get them using the device variable in a config file. I
couldn't figure out the syntax to get it to do something similar
to the
--i2c=port:ALL function. Once I went to the command line form, it
found
all three.
thanks,
jerry
On 06/09/2015 07:38 PM, Jerry Scharf wrote:
> Hi,
>
> One more question. I got the server going, but it only saw 1 of
the 3
> ds2482-100s. The I2C scan code shows all three devices.
>
> It looks from the log like it didn't even try anything else after it
> found one. Is there something I need to do to have it find all
three?
> With over 350 1-wire devices, it seemed better to have multiple
masters.
>
> jerry
>
> On 06/09/2015 07:20 PM, Jerry Scharf wrote:
>> Hi,
>>
>> I just pulled a3.1p0 from sourceforge and am building it on a
beaglebone
>> black w/ debian 7.8. I ran into some things I don't understand
while
>> running configure.
>>
>> When I try to enable fuse for owfs, I pass it the include path.
The test
>> program blows up during compile with an undefined size_t in the
stdio.h.
>> Has anyone found a way around this?
>>
>> I have also run into some configure problems around usb as
well. It is
>> looking for the file libusb-1.0.pc, which is not on the system
despite
>> libusb-dev being installed.
>>
>>
>> Also, I can probably work through the documents, but if someone
has the
>> commands to have owserver look at I2C#2 for the converter
chips, that
>> would be a big help. The I2C scan tool sees the three chips.
>>
>> thanks in advance,
>> jerry
>>
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers
------------------------------------------------------------------------------
_______________________________________________
Owfs-developers mailing list
Owfs-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/owfs-developers