They do actually but you have to get them at stores that sell hearing accessories. Not that expensive also.
I have one that works with a aaa battery. -----Original Message----- From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dane Trethowan Sent: 02 November 2010 06:58 PM To: PC Audio Discussion List Subject: Re: A tip to overcome one of the annoying problems with the Zoom H1 Do such things as small amps with induction loops built in exist? Another way to do it would be to get hold of one of those telephone amplifiers Radio Shack sold at one time, the type which consist of a loud speaker and a telephone pickup. On 03/11/2010, at 3:13 AM, André van Deventer wrote: > Dane > > There are many of these weird things I use the induction loop coils in > a hearing aid for. > > I can hear the hard disk of my iriver hard drive booting up for example. > And my cell phone to know if it's starting up or not. > > If a normal hearing person can get hold of a small amplifier with an > induction loop built in, you will be able to check all kinds of > interesting things. > > Andre > > > > -----Original Message----- > From: pc-audio-boun...@pc-audio.org > [mailto:pc-audio-boun...@pc-audio.org] > On Behalf Of Dane Trethowan > Sent: 02 November 2010 04:37 AM > To: PC Audio Discussion List > Subject: A tip to overcome one of the annoying problems with the Zoom > H1 > > Hi! > > Now this tip isn't going to be for everyone as not everyone wears > hearing instruments which can be used with induction loops but if you > do? Well here's a handy way to use your instruments to great effect > when sorting out one of the very few functions of the Zoom H1 which isn't accessible. > > I'm talking about the Bit and Sample rate of the file you're > recording, this is changed in "Standby" mode by using the fast forward > and rewind buttons, rewind takes you back through the cycle whilst > fast forward takes you forward through the cycle of bit and sample rates. > > When recording using Wave Broadcast format you cycle through 44.1KHZ > 16 Bit, 48KHZ 24 bit and so on right the way up to 96KHZ 24 and back > to 44.1KHZ 16 bit so how to tell where you are. > > Well turn your instruments to pick up induction loops and put the > recorder near them. Now start recording, you'll be able to hear the > recorder as it writes to the SD card and the slower the rate of > writing then the small the sample size, 44.1KHZ 16 bit has the Zoom H1 > writing to the SD card about every half second whilst 96KHZ 24 bit has > the H1 writing to the SD card every sixth of a second or so. > > Just thought others may find this helpful as I do, still haven't > worked out a way to set the date and time for date/time stamping of > recordings but I have to admit to not trying too hard, after all! one > can change all that when the files are copied from the H1 to your computer. > > > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org > > > To unsubscribe from this list, send a blank email to: > pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org To unsubscribe from this list, send a blank email to: pc-audio-unsubscr...@pc-audio.org
