thanks, it works when I send [device 0, input $1, dimen 640 480( while changing input number only, nothing happens
but I succed by changing device and input numers [device 6, input 1( it works with any input number...(?) if I send only [device 6( or only [input( nothing happens it makes something only if the message contains device and input inside [device x, input x( 2008/2/13, chris clepper <[EMAIL PROTECTED]>: > > There is no way to tell what the dialog settings are current set to using > the Quicktime APIs and there is no standard way that driver authors > implement the dialogs so it is difficult to figure out what is going wrong. > It is possible that whenever the dialog is called the settings on the USB > cam are reset or at least appear to reset. I had this happen with some > terrible industrial cameras before I ditched them for DV. > > You can use a message like [device 0, input 0, dimen 640 480( to set the > device and then the dimensions. Since both the iSIght and webcam are USB > devices then the input number might have to change instead of the device. > The order they appear in the dialog Source list will give some idea what > order they are in as will the info printed to the Pd console. > > > On Feb 12, 2008 5:24 PM, stefan <[EMAIL PROTECTED]> wrote: > > > hi, > > > > - I use a macbook and try to configure a usb webcam through pix_video > > default selected camera is the built-in one > using [dialog( I select > > another webcam (usb) > > - if I send a message like [dimen x x( to [pix_video]. > > the configuration I choose in [dialog( is reset and it come back to the > > default settings (the built-in camera...) > > I use a logitechquickcam (macam driver) but I had the same problem with > > a apple I-sight (firewire) > > - I try to configure the webcam using the device message... > > but - [device 0( or everything else make nothing (or I don't know how > > to make it work..) > > - [enumerate( does not work... > > - I try with the driver too, but ... i can't figure myself how > > it's work > > > > > > > > > > is it possible to configure usb webcam with another way than > > [dialog( and if it is possible...how? :) > > > > > > and why the dialog box configuration reset when I sent a dimen message > > to pix_video? > > > > > > > > thx > > > > > > s. > > > > _______________________________________________ > > PD-list@iem.at mailing list > > UNSUBSCRIBE and account-management -> > > http://lists.puredata.info/listinfo/pd-list > > > > >
_______________________________________________ PD-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list