You tried with your "StandardFirmata", to no avail. Please tell me that all hope is not lost, doc...
:Pierre 2011/7/5 Pierre Massat <pimas...@gmail.com> > Should I try to upload a older firmata? > > :Pierre > > > 2011/7/5 Hans-Christoph Steiner <h...@at.or.at> > >> >> The Uno board was troublesome back when I first tried it, but that was a >> while ago. I didn't make that StandardFirmata_2_2_for_Uno_0_3 firmware, so >> I don't know what changes it has. Is anyone having these problems on boards >> older than an Uno? >> >> .hc >> >> On Jul 5, 2011, at 3:32 PM, Pierre Massat wrote: >> >> It makes no difference at all. >> >> Here's what happens : >> Inputs 2 through 7 work fine. >> Inputs 8 and 9 work fine. >> >> But if i use any of the inputs within the 2-7 group, and then use any >> input of the second group (8 and 9), i have to trigger the later twice >> before i can see something is happening. >> >> It goes like this : >> (in group 2 to 7) >> First guy : "Pushed button 3." >> Second guy (Pd) : "Ok, pushed button 3." >> First guy : "Pushed button 7." >> Second guy : "K, you pushed button 7." >> First guy : "Pushed button 8." >> Second guy : "Come again?" >> First guy : "PUSHED BUTTON 8!" >> Second guy : "Oh, yeah, button 8..." >> First guy ; "Pushed button 3." >> Second guy : "I'm sorry, what button?" >> First guy : "BUTTON 3!!" >> Second guy : "Yep, button 3. >> >> I hope it is clear now what the problem is. >> >> Pierre >> >> 2011/7/5 Pierre Massat <pimas...@gmail.com> >> >>> Ok, I checked in Windows XP, with a custom sketch, and all of my inputs >>> work flawlessly. >>> (The IDE seem to work much better in Windows than in Linux btw). >>> >>> So the problem has to be somewhere between firmata and pduino. >>> >>> I will try with the latest pduino... >>> >>> Thanks for your help! >>> >>> Pierre >>> >>> >>> 2011/7/5 Hans-Christoph Steiner <h...@at.or.at> >>> >>>> >>>> It would good to nail down the source of this and fix it. Which version >>>> of Firmata are you using? Which firmware? Also, there was a bug like that >>>> a >>>> while back that was fixed, so make sure you have the latest Pd patch too: >>>> >>>> http://at.or.at/hans/pd/objects.html#pduino >>>> >>>> .hc >>>> >>>> On Jul 5, 2011, at 2:49 PM, Ingo wrote: >>>> >>>> I fixed it by replacing the mapping object by a custom patch which deals >>>> with the first two switches seperately.**** >>>> I’ll look it up tomorrow and send you my fix.**** >>>> ** ** >>>> >And where does the problem lie? In the board, firmata, or pduino?**** >>>> ** ** >>>> It suppose fermata since the wrong numbers arrive at pduino.**** >>>> ** ** >>>> Ingo**** >>>> ** ** >>>> ** ** >>>> ------------------------------ >>>> *Von:* Pierre Massat [mailto:pimas...@gmail.com <pimas...@gmail.com>] >>>> *Gesendet:* Dienstag, 5. Juli 2011 20:41 >>>> *An:* Ingo Scherzinger >>>> *Cc:* Ingo Scherzinger >>>> *Betreff:* Re: [PD] Arduino (is drivin me mad**** >>>> ** ** >>>> >>>> Can we fix that?? >>>> >>>> Pierre**** >>>> 2011/7/5 Ingo Scherzinger <i...@fixitinthemix.de>**** >>>> I happens when switching from the first two switches to the others >>>> within a >>>> 8-bit block. Since the block has the wrong header it will ignore the >>>> "on" >>>> message and send the first "off". So you have to press the button twice. >>>> Once pressed it works until you press another button within that block >>>> and >>>> return to the first one. >>>> >>>> Ingo >>>> >>>> ________________________________________ >>>> Von: Pierre Massat [mailto:pimas...@gmail.com] >>>> Gesendet: Dienstag, 5. Juli 2011 19:56 >>>> An: Ingo Scherzinger >>>> Betreff: Re: [PD] Arduino (is drivin me mad**** >>>> >>>> >>>> Glad to know i'm not the only one with this problem! Sorry for starting >>>> a >>>> new thread. >>>> I have problems with inputs 8 and 9, or 9 and 10 (the first two on the >>>> second digital input socket). >>>> >>>> Pierre >>>> 2011/7/5 Ingo Scherzinger <i...@miamiwave.com> >>>> This is the same problem I had described several times before. There is >>>> an >>>> error in the 8-bit block where the digital ins 2+3 are coming in. It can >>>> be >>>> traced somewhere in the mapping section. I'll try to finally look it up >>>> tomorrow. >>>> >>>> Ingo >>>> >>>> >>>> >>>> ________________________________________ >>>> Von: pd-list-boun...@iem.at [mailto:pd-list-boun...@iem.at] Im Auftrag >>>> von >>>> Pierre Massat >>>> Gesendet: Dienstag, 5. Juli 2011 19:36 >>>> An: pd-list >>>> Betreff: [PD] Arduino (is drivin me mad >>>> >>>> Hi All, >>>> >>>> I apologie if this is off-topic. Please let me know if you think it is. >>>> >>>> I have been working on my arduino-based pedal, and im faced with a >>>> peculiar >>>> problem right now. I'm using 8 digital inputs ( 6 on the first socket of >>>> the >>>> board, inputs 2 through 8, and 2 on the second digital socket, inputs 9 >>>> and >>>> 10). The first 6 inputs work perfectly, but when i want to use any of >>>> the >>>> last two inputs (9 and 10), i have to trigger them twice before they >>>> start >>>> working. Then i'm faced with the exact same problem when i get back to >>>> the >>>> first 6 inputs. I am pretty sure that i used the very same wiring for >>>> all 8 >>>> inputs. >>>> >>>> So... I thought that maybe this could be a problem with firmata or >>>> pduino >>>> (no offense, Hans!). I have been spending the last hour trying to write >>>> a >>>> simple program in the arduino software in order to print in serial >>>> monitor >>>> the values of my digital inputs. >>>> >>>> Now my question... Is the arduino software just really really bad? Or >>>> was it >>>> just not designed to work on an ubuntu machine? It is randomly very slow >>>> at >>>> start-up, it randomly disables the serial port menu in Tools, it >>>> randomly >>>> decides to prevent me from uploading the program in the board, or warns >>>> me >>>> that serial port dev/ttyACM0 is already in use, or can't be found. The >>>> fact >>>> that i unplug and replug the board, or change the usb port, or restart >>>> the >>>> software doesn't seem to make any difference. >>>> >>>> This is beginning to look more like witchcraft than computer science to >>>> me. >>>> >>>> Please help me, or i'll teach it how to fly out my window. >>>> >>>> Thank you. >>>> >>>> Pierre >>>> >>>> **** >>>> ** ** >>>> _______________________________________________ >>>> Pd-list@iem.at mailing list >>>> UNSUBSCRIBE and account-management -> >>>> http://lists.puredata.info/listinfo/pd-list >>>> >>>> >>>> >>>> >>>> >>>> ---------------------------------------------------------------------------- >>>> >>>> Man has survived hitherto because he was too ignorant to know how to >>>> realize his wishes. Now that he can realize them, he must either change >>>> them, or perish. -William Carlos Williams >>>> >>>> >>>> >>> >> >> >> >> >> ---------------------------------------------------------------------------- >> >> Computer science is no more related to the computer than astronomy is >> related to the telescope. -Edsger Dykstra >> >> >> >
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list