I tried too, no luck with sound blaster USB dongles btw Sent from my iPhone
On Jul 26, 2013, at 6:03 PM, "Dan Wilcox" <danomat...@gmail.com<mailto:danomat...@gmail.com>> wrote: Simply put, the RPI firmware does not work with USB audio correctly yet. See this thread: http://lists.puredata.info/pipermail/pd-list/2013-07/103261.html I keep looking for fixes, but the way USB is handled, the only way for it to work without dropouts is to have *nothing* else plugged into the usb bus and ethernet disabled ... sucks. On Jul 26, 2013, at 5:41 PM, pd-list-requ...@iem.at<mailto:pd-list-requ...@iem.at> wrote: From: John Canning <johnnyboy7...@hotmail.co.uk<mailto:johnnyboy7...@hotmail.co.uk>> Subject: [PD] Raspberry Pi Behringer UCA222 boot problems Date: July 26, 2013 5:40:49 PM EDT To: Pure Data <pd-list@iem.at<mailto:pd-list@iem.at>> Hi Folks, I have been trying for quite a while to get my Raspberry Pi to work in full duplex with Pd. I have installed the OS on the PdPi site and updated it. I am using a Behringer UCA222 for audio. When I change the USB speed down to 1 (dwc_otg.speed=1) in /boot/cmdline.txt my Pi won't boot with the soundcard plugged in. If I unplug the soundcard the Pi will boot but as soon as I plug it in the Pi crashes. Has anyone got any suggestions about why this is happening? Thanks, John -------- Dan Wilcox @danomatika danomatika.com<http://danomatika.com> robotcowboy.com<http://robotcowboy.com> _______________________________________________ Pd-list@iem.at<mailto:Pd-list@iem.at> mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list
_______________________________________________ Pd-list@iem.at mailing list UNSUBSCRIBE and account-management -> http://lists.puredata.info/listinfo/pd-list