That bg_bg locale sounds familiar, like it is problematic,and I found a reference to it in t/lib.t. '[' is the lower case of O with
cd t PERL_DEBUG_FULL_TEST=2 ./perl -I../lib -T ../lib/locale.tthat should point out all the cases like this, and which could be causing this problem. there are other cases we skip becuase of defective locale, andthis might be a new instance of that.
On 10/06/2017 05:30 AM, Yaroslav Kuzmin wrote:
Maybe add debug information in function XS_I18N__Langinfo_langinfo() on Langinfo.xs file ? Output debug information (07:23) RS12 : PDKUZM | ~/ussport/perl/perl-build/ext/I18N-Langinfo :> ../../perl -I../../lib -T t/Langinfo_d.t 1..38 ok 1 - use I18N::Langinfo; ok 2 - calling langinfo() with ABDAY_1 ok 3 - checking if the returned string is defined ok 4 - checking if the returned string has a positive length ok 5 - calling langinfo() with DAY_1 ok 6 - checking if the returned string is defined ok 7 - checking if the returned string has a positive length ok 8 - calling langinfo() with ABMON_1 ok 9 - checking if the returned string is defined ok 10 - checking if the returned string has a positive length ok 11 - calling langinfo() with MON_1 ok 12 - checking if the returned string is defined ok 13 - checking if the returned string has a positive length ok 14 - calling langinfo() with RADIXCHAR ok 15 - checking if the returned string is defined ok 16 - checking if the returned string has a positive length ok 17 - calling langinfo() with AM_STR ok 18 - checking if the returned string is defined ok 19 - checking if the returned string has a positive length ok 20 - calling langinfo() with THOUSEP ok 21 # skip returned string was empty, skipping next two tests ok 22 # skip returned string was empty, skipping next two tests ok 23 - calling langinfo() with D_T_FMT ok 24 - checking if the returned string is defined ok 25 - checking if the returned string has a positive length ok 26 - calling langinfo() with D_FMT ok 27 - checking if the returned string is defined ok 28 - checking if the returned string has a positive length ok 29 - calling langinfo() with T_FMT ok 30 - checking if the returned string is defined ok 31 - checking if the returned string has a positive length ok 32 - ABDAY_1 => 'Sun' ok 33 - ABMON_1 => 'Jan' ok 34 - DAY_1 => 'Sunday' ok 35 - MON_1 => 'January' ok 36 - RADIXCHAR => '.' ok 37 - THOUSEP => '' # Trying bg_bg CEE3204S The system detected a protection exception (System Completion Code=0C4). From compile unit /u/pdkuzm/ussport/perl/perl-build/sv.c at entry point Perl_newSVpv at statement 9410 at compile unit offset +00000134 at entry offset +00000134 at address 214C97FC. Segmentation fault -------- Исходное сообщение -------- От: Karl Williamson <pub...@khwilliamson.com> Кому: Yaroslav Kuzmin <ykuz...@rocketsoftware.com>, perl-mvs@perl.org <perl-mvs@perl.org>, perl5-port...@perl.org <perl5-port...@perl.org> Копия: daily-build-repo...@perl.org <daily-build-repo...@perl.org> Тема: Re: Smoke [blead] v5.26.0-859-g7bd9fb107e FAIL(X) os/390 25.00 (2964/) Дата: Thu, 5 Oct 2017 08:25:16 -0600 On 10/05/2017 12:18 AM, Yaroslav Kuzmin wrote:The attached file does not have extra debugging info.Oops. Sorry. I attached a version either from a wrong work space or had git stashed it before I sent it. The one attached to this email should have the extra debugging.-------- Исходное сообщение -------- *От*: Karl Williamson <pub...@khwilliamson.com <mailto:karl%20williamson%20%3cpub...@khwilliamson.com%3e>> *Кому*: Yaroslav Kuzmin <ykuz...@rocketsoftware.com <mailto:yaroslav%20kuzmin%20%3cykuz...@rocketsoftware.com%3e>>, perl-mvs@perl.org <perl-mvs@perl.org <mailto:%22perl-...@perl.org%22%20%3cperl-...@perl.org%3e>>, perl5-port...@perl.org <perl5-port...@perl.org <mailto:%22perl5-port...@perl.org%22%20%3cperl5-port...@perl.org%3e>> *Копия*: daily-build-repo...@perl.org <daily-build-repo...@perl.org <mailto:%22daily-build-repo...@perl.org%22%20%3cdaily-build-repo...@perl.org%3e>> *Тема*: Re: Smoke [blead] v5.26.0-859-g7bd9fb107e FAIL(X) os/390 25.00 (2964/) *Дата*: Tue, 3 Oct 2017 22:54:13 -0600 On 10/03/2017 05:44 AM, Yaroslav Kuzmin wrote:Dump attachmentThanks. Please try the attached Langinfo.t, which has extra debugging info to see what happens.(07:44) RS12 : PDKUZM | ~/ussport/perl/perl-build/ext/I18N-Langinfo :> ../../perl -I../../lib -T t/Langinfo.t 1..38 ok 1 - use I18N::Langinfo; ok 2 - calling langinfo() with ABDAY_1 ok 3 - checking if the returned string is defined ok 4 - checking if the returned string has a positive length ok 5 - calling langinfo() with DAY_1 ok 6 - checking if the returned string is defined ok 7 - checking if the returned string has a positive length ok 8 - calling langinfo() with ABMON_1 ok 9 - checking if the returned string is defined ok 10 - checking if the returned string has a positive length ok 11 - calling langinfo() with MON_1 ok 12 - checking if the returned string is defined ok 13 - checking if the returned string has a positive length ok 14 - calling langinfo() with RADIXCHAR ok 15 - checking if the returned string is defined ok 16 - checking if the returned string has a positive length ok 17 - calling langinfo() with AM_STR ok 18 - checking if the returned string is defined ok 19 - checking if the returned string has a positive length ok 20 - calling langinfo() with THOUSEP ok 21 # skip returned string was empty, skipping next two tests ok 22 # skip returned string was empty, skipping next two tests ok 23 - calling langinfo() with D_T_FMT ok 24 - checking if the returned string is defined ok 25 - checking if the returned string has a positive length ok 26 - calling langinfo() with D_FMT ok 27 - checking if the returned string is defined ok 28 - checking if the returned string has a positive length ok 29 - calling langinfo() with T_FMT ok 30 - checking if the returned string is defined ok 31 - checking if the returned string has a positive length ok 32 - ABDAY_1 => 'Sun' ok 33 - ABMON_1 => 'Jan' ok 34 - DAY_1 => 'Sunday' ok 35 - MON_1 => 'January' ok 36 - RADIXCHAR => '.' ok 37 - THOUSEP => '' CEE3204S The system detected a protection exception (System Completion Code=0C4). From compile unit /u/pdkuzm/ussport/perl/perl-build/sv.c at entry point Perl_newSVpv at statement 9410 at compile unit offset +00000134 at entry offset +00000134 at address 214C97FC. Segmentation fault -------- Исходное сообщение -------- *От*: Karl Williamson <pub...@khwilliamson.com <mailto:pub...@khwilliamson.com> <mailto:karl%20williamson%20%3cpub...@khwilliamson.com%3e>> *Кому*: Yaroslav Kuzmin <ykuz...@rocketsoftware.com <mailto:ykuz...@rocketsoftware.com> <mailto:yaroslav%20kuzmin%20%3cykuz...@rocketsoftware.com%3e>>, perl-mvs@perl.org <mailto:perl-mvs@perl.org> <perl-mvs@perl.org <mailto:perl-mvs@perl.org> <mailto:%22perl-...@perl.org%22%20%3cperl-...@perl.org <mailto:%22%20%3cperl-...@perl.org>%3e>>, perl5-port...@perl.org <mailto:perl5-port...@perl.org> <perl5-port...@perl.org <mailto:perl5-port...@perl.org> <mailto:%22perl5-port...@perl.org%22%20%3cperl5-port...@perl.org <mailto:%22%20%3cperl5-port...@perl.org>%3e>> *Копия*: daily-build-repo...@perl.org <mailto:daily-build-repo...@perl.org> <daily-build-repo...@perl.org <mailto:daily-build-repo...@perl.org> <mailto:%22daily-build-repo...@perl.org%22%20%3cdaily-build-repo...@perl.org <mailto:%22%20%3cdaily-build-repo...@perl.org>%3e>> *Тема*: Re: Smoke [blead] v5.26.0-859-g7bd9fb107e FAIL(X) os/390 25.00 (2964/) *Дата*: Tue, 19 Sep 2017 09:24:46 -0600 On 09/12/2017 02:47 AM, Yaroslav Kuzmin wrote:Smoke log available at https://drive.google.com/file/d/0B5PTttxwo7qARVAzdGo5SDFFRWs Automated smoke report for branch blead 5.27.4 patch 7bd9fb107eaf8df3da9ce46c89920f8da72c76ab v5.26.0-859-g7bd9fb107eThe new failure in this report is CEE3204S The system detected a protection exception (System Completion Code=0C4). From entry point Perl_newSVpv at compile unit offset +000000B8 at entry offset +000000B8 at address 2124CF20. ext/I18N-Langinfo/t/Langinfo .................................. FAILED--expected 38 tests, saw 37 From looking at the internet on this, this looks like what's called a segfault in Unix. I looked at the code and I don't see anything wrong. Any ideas? ================================ Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 877.328.2932 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy ================================ This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you.================================ Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 877.328.2932 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy ================================ This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you.================================ Rocket Software, Inc. and subsidiaries ■ 77 Fourth Avenue, Waltham MA 02451 ■ Main Office Toll Free Number: +1 877.328.2932 Contact Customer Support: https://my.rocketsoftware.com/RocketCommunity/RCEmailSupport Unsubscribe from Marketing Messages/Manage Your Subscription Preferences - http://www.rocketsoftware.com/manage-your-email-preferences Privacy Policy - http://www.rocketsoftware.com/company/legal/privacy-policy ================================ This communication and any attachments may contain confidential information of Rocket Software, Inc. All unauthorized use, disclosure or distribution is prohibited. If you are not the intended recipient, please notify Rocket Software immediately and destroy all copies of this communication. Thank you.
Langinfo.t
Description: Perl program
