you don't, the per group and user rules tag is only available on -current.
so wait and see. "Amir Seyavash Mesry" <[EMAIL PROTECTED]> writes: > Can some one tell me what the proper syntax is for using the user & > group parameters in OpenBSD 3.1 & PF. > here is and example rule. > pass out proto tcp from fxp0 port 33333 >< 55555 to any port 33333 >< > 55555 modulate state > pass out proto udp from fxp0 port 33333 >< 55555 to any port 33333 >< > 55555 > > the user id is 1001 Group id is 1007, how do I limit those to rules to > be used by those 2 id's? > > Amir Seyavash Mesry > [EMAIL PROTECTED] > LSI Logic Corporation > http://www.lsilogic.com/ > Raid Support Test Technician > 6145-D Northbelt Parkway > Norcross, GA 30071 > 678-728-1211 > > NOTICE: This communication may contain privileged or other > confidential information. If you are not the intended recipient, or > believe that > you have received this communication in error, please do not print, > copy, > retransmit, disseminate, or otherwise use the information. Also, please > indicate > to the sender that you have received this communication in error, and > delete the > copy you received. Thank you. > > > -- Loïc